When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
Best Dsp For Home Audio (2024 Update)
Choosing the best DSP for your home audio setup can seem daunting, but it doesn’t have to be. With some key considerations in mind, you’ll be equipped to find the perfect DSP that takes your listening experience to new heights.
First, think about the size and configuration of your space. A large, open concept living room will demand a different DSP than a small, dedicated home theater. Consider how many speakers you need to power, if you’ll add surround sound, and your long-term expansion plans. This will guide your required number of outputs and channels.
It’s also important to consider your audio sources. Will you primarily listen to music, watch movies, or use your DSP for multi-room playback? Certain DSPs cater to specific listening goals. And if you anticipate adding streaming devices or wireless compatibility down the road, ensure your DSP has the connectivity options you need built-in or available.
Ease of use is another key factor. Do you want a DSP you can configure yourself with intuitive software? Or would you rather have your integrator handle the setup? There are solutions that cater to all comfort levels. Read reviews to get a sense of the programming and calibration workflow.
By weighing your room needs, audio goals, connectivity plans, and ease of use preferences, you’ll find the perfect DSP to take your home audio to the next level. Ready to experience music and movies as the artist and director intended? Let the hunt for the perfect DSP begin!
20 Best Dsp For Home Audio (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
Features:
- Digital audio signal processor 2 x in and 4 x out
- Usb audio dac + 400mhz dsp processor in one box
- Wide range of processing blocks peq crossovers delay meters fir and iir filters
Features:
- Lcd display for saving and entering parameters
- Input and output eqs for versatile tuning capabilities
- Built-in limiter to help protect your amplifiers and speakers
Reviewers Noted:
Ease of use
Features:
- 6 low and/or high-level inputs
- 12 rca outputs
- Matrix mixing
Reviewers Noted:
Easy to use . Good sound quality . Power . Ease of setup
Features:
- Engineered with a low-pass filter to produce distortion-free sound
- Overload protection helps provide high-quality sound with maximum output
- Features a lcd display to let you control the amplifier eaisly
$1200.98
3.0
Reviewers Noted:
Ease of setup
Features:
- Rms rating of 150w x 2 at 8 ohms, 2 channels driven for robust audio.8-ohm impedance.
- Efficiently conducts power.rack-mountable design.
- Offers flexible placement options.sonarc (sonance advanced room correction).
$164.98
4.1
Features:
- Real time signal processing for ultimate control
- Complete audio customization for application specific installations
- Easy to use graphical user interface (gui)
Features:
- Easy to use software found on google play or the app store to fine tune and monitor every aspect of your signal processing.
- Automatic or manual limiter function with threshold, attack and release.
- Input equalizer with 15 bands between 1/3 octave.
Reviewers Noted:
Good sound quality . Easy to set up . Size
Features:
- I'm sure you know what this is etc but read more on the universal audio website if you want to know more.
- Note this is the pcie card version not the thunderbolt version!
- Any questions feel free to ask.
Reviewers Noted:
Ease of use . Weight
Features:
- 53 to 0dbchannel gain
- 12 to +12dbchannel equalizer (eq channel)equalization bands 8 parametric per channelgain
- 12 to +12dbq factor 0.6 to 9.9time alignment (delay)time 0 to 18,95msdistance 0 to 6500mmlimiterthreshold
Features:
- Add low-frequency dsp to your current audio system that tailors your subwoofer to fit the bass sonic characteristics to meet your desired sound
- Easy to use android and ios mobile smart phone app enables you to adjust all dsp features from the palm of your hand
- Simply insert the dsp-lf hardware module between your receiver with a sub output and your sub to instantly gain dsp capabilities
$439.95
4.3
Reviewers Noted:
Ease of use . Sound quality
Features:
- Powered dsp audio system with 6ch inputs, 8ch outputs, and easy-to-use tuning software.
- Rms power output @ 2ω 60w x 8, <1% thd+n.
- Rms power output @ 4ω 40w x 8, <1% thd+n.
$529.99
4.4
Features:
- 24-bit dsp processor retains oem fader control
- Automatically corrects time-delayed factory outputs prior to signal summing and eq correction
- Complex factory signals
Features:
- This management system helps modify the sound output of your speaker
- The auto eq wizard lets you control the equalization of your music conveniently
- Feedback suppression algorithm delivers clear audio quality
Features:
- Audiocontrol 6-channel factory sound processor with eq and signal delay
- Designed to work with any factory stereo
- 6 speaker-level inputs (each can handle up to 400 watts rms of power)
Features:
- Class-d – massive power, perfect sound
- Linear frequency response at any speaker load
- Top-shelf sound from high-performance dsp
Features:
- The 300 mhz speed reduces latency and response time for smooth operations
- Frequency response of 20hz to 20khz offers a clear and immersive sound quality
- Wireless connectivity allows you to pair this signal processor with compatible devices easily
Features:
- Output mirroring function
- Individual mute function on the outputs
- Output pairing function
Features:
- Make good sound great.30 bands of equalization.
- Adjust sound to your personal preferences.accubass processing.
- Optimize the performance of your audio system.
Features:
- Digital signal processor with integrated maestro can interface
- 4-channel balanced rca inputs
- 4-channel high level i
$749.00$561.99
4.9
Features:
- Make good sound great.30 bands of equalization.
- Adjust sound to your personal preferences.accubass processing.
- Optimize the performance of your audio system.
1. Minidsp 2×4 Hd Boxed Usb Dac Digital Signal Processor
Product Details:
Digital audio signal processor 2x – in, 4 x out usb audio dac + 400mhz dsp processor in one box wide range of processing blocks (peq/crossovers/delay/meters/fir and iir filters.. ) analog, usb, toslink audio source, up to 4 presets stored a huge dsp community of diyers, speaker builders, home – theater enthusiasts introducing the long-awaited reboot of mini – dsps best-selling 2×4 digital audio processor: the minidsp 2×4 hd! this tiny powerhouse is jam-packed with mini – dsps tried and proven audio processing functionality: flexible para-metric eq, butterworth and linkwitz-riley crossovers, advanced biquad pro-gramming, and delay on each output channel. mini – dsps one hardware many plugins concept allows for many interesting future applications! the upgraded on-board 400 mhz analog devices sharc processor also ena-bles substantial processing upgrades previously available only on more ex-pensive platforms, such as 96 k – hz internal processing for true high-resolution audio capability and assignable fir filter taps for sophisticated equalization, crossover, and room correction capabilities. all to be accessed and programmed with mini – dsps easy-to-use interface software. i/o capabilities get an upgrade too, with the addition of usb audio streaming up to 192 k – hz and a toslink digital input. the minidsp 2×4 hd will find application in full-sized hifi and home theater systems, on desktops, in cars, in recording studios anywhere a compact, simple, yet surprisingly powerful dsp audio processor is needed.
Specifications:
| Input/Ouput Configuration | 2 in / 4 out |
| Input / Output Max Levels | IN: 2Vrms / 4Vrms (jumper-selectable); OUT: 2Vrms |
| Input Impendance | 10 kΩ |
| Output Impedance | 560 Ω |
| Calibration Software | miniDSP 2×4 HD1 plug-in |
| Filtering Technology | FIR + IIR |
| DSP Presets | Up to 4 presets |
| Dimensions | 27 x 119 x 107 mm |
| Power | 12 VDC single supply; 2.1 mm round plug; 2.5W |
Reviews:
It took me a short time to learn how it works. Implementing it was not as rewarding. On my system (asus laptop, preamp, power amps) it is incredibly noisy when hooked up to usb, which it must be to adjust anything. Sounds like a windstorm. Likely a usb groundloop, but I'm also running everything out of the laptop thru a usb dac, and it is dead quiet. Also found if I powered it thru the usb cable with an ac adapter (charger) it also produced audible noise (tho much less) w/o even being connected to the laptop. So I use an ac adapter thru the dc in and it's thankfully quiet. Unfortunately it's one of the few tools of its kind and I need it to run my biamped uTrynergy speakers which demand custom crossovers and lots of EQ meddling. So I'm keeping it.Jon
I bought the 2x4HD to use in conjunction with a DSP408 as the "Master" processor for my car audio system. I have 4-way mains that the DSP408 handles and needed more channels to integrate the subs. I had the OpenDRC in mind for the extra power and channels but opted for the 2x4HD because it can directly act as a DAC with my phone and can be upgraded to Dirac. Originally I was going to use it purely to integrate the subs with the mains, using my head unit as the main controller for the system, but when I saw it could act as a DAC streaming directly from my phone, I had to try using it that way so I included the OTG cable that Parts Express carries in my order. After hooking it up and trying it, I was like, "Well, looks like I'm not using using this purely as a sub processor anymore lol." Needless to say the sound is superior using it directly as a DAC, rather than using thr Aux or BT on the head unit. The other feature I didn't think much about that really came in handy was the compressor. On the highway, if you want to hear the quiet parts you have to crank the snot out of your system and then the loud parts are blowing out your windshield. I set the compressor with a threshold of -35dB and a ratio of 1.45, and now I can turn the compressor on using the IR remote and listen at lower levels without constantly fiddling with the volume and bass controls. Fantastic. (One thing – I'm an audio engineer so I'm used to high-end pro audio compressors and compared to those the miniDSP isn't amazing but it does make a dramatic difference compared to no compressor at all.) The other main feature I was interested in is the FIR filtering, which lets you line up the different parts of the sound to achieve maximum depth and impact. I haven't extensively experimented with this feature yet, but I did flatten the phase of my subs and found that the bass feels more three dimensional (great test track for this is Trentemoller – Nightwalker). However, I'm more interested in phase aligning my mids and highs to tighten thr center image. Compared to the DSP408 the 2x4HD certainly has better sound quality potential, however the real benefit of the 2z4 is that it can be an all-in-one solution straight into an amp. If you're looking for supermaximum balls to the wall sound quality, I would step up to something that is more configurable, like a digital mixer that can do reverb, FX channels, parallel compression, etc, then feed it to a studio grade DAC. The catch is that it costs 50x as much to do that vs the MiniDSP, which is a very elegant, simple solution. If you're new to all this I actually recommend the DSP408 because the Android control makes it super easy to play around with. Good luck!Andrew
My system is EQ'd better than ever. These are better for home than the DSP-408. The 408 suffers from startup audio issues. This is my second one without the HD. I don't use surround sound as my speakers are of higher quality, so 2.1 is fine enough. Also I cut the cord so all of my audio can come from the TV TOSlink, I wish this had a TOSlink out but it is doing fine. I am using it in front of a Yamaha Aventage that has it's own PE but it is limited to LR x 7 bands + 4 for the subwoofer. Yam will not equalize out all of the bumps in my room EQ graphs. The MiniDSP will and is a little underused since I haven't applied any front end PE that it can do, I migh work on that later. The non HD version with 31 EQ bands is pretty awesome too. DSP-408 people are lazy and have a product but it is a bit unfinished and no updates to fix some of it's startup ANNOYANCES yetSamuel
2. Prv Audio Dsp 2.8x Car Audio Digital Signal Processor 2×8
Product Details:
Prv dsp 2.8x digital signal processor description bringing innovation and technology to the automotive sound market, prv audio launches the dsp 2.8x digital signal processor, capable of making various adjustments, from filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. enhancing your audio system! through an lcd display and intuitive interface, it allows real-time audio adjustments. – the dsp 2.8x features 2 audio inputs (a and b) and 8 independent outputs, and allows you to choose the audio source (a, b or a + b) for each output. it has an integrated equalization system, with 15-band graphic equalizer, manual tuning or through 12 presets (flat, loudness, bass boost, mid bass, treble boost, powerful, electronic, rock, hip hop, pop, vocal and pancadão). for professional equalization adjustments, it has 1 input parametric equalizer and 1 output parametric equalizer with gain control, specific frequency setting and equalizer bandwidth, allowing fine adjustments and detailed equalization control. the crossover function allows you to precisely define the cut frequencies, attenuation rates and topology of the low – pass and high – pass filters with butterworth and linkwitz-riley filters (12/18/24/36/48 d – b / 8a). to aid in the protection of amplifiers and loudspeakers, the dsp 2.8x features a limiter with dynamic attack-release system that dynamically controls the attack and release parameters in real time, providing security and sound fidelity. in the audio treatment, it also has alignment capabilities through high accuracy delay, phase inversion, independent gain by output and master level. for accurate measurements and adjustments, the dsp 2.8x features an integrated audio generator with tone generation and frequency sweep and pink noise. configuration copy functions between output channels. it also has the functions of management, save and load settings in memory, security password that blocks the editing of the parameters, marquee / text display and language selection.
Specifications:
| Weight | 1 lb |
Reviews:
It does so much that it makes you wonder why they don't cost more honestly. They are worth every penny.slowflopro844
I recommend this for competition use it's a very good product has a equalizer and crossover to tune any system.dper6083
3. Alpine Pxe-0850x 12-Channel Advanced Wireless Digital Sound Processor
Product Details:
Description: next generation advanced 12 channel digital signal processor. features: new and improved software same great hardware, new and improved software. cleaner layout and updated to match the pxe-x09s ui, the new software simplifies the mixer and tuning flow. 12 channel flexibility just like its predecessor, the pxe-0850x boasts 6 in/12 out which gives you the flexibility to build various systems both aftermarket and oem integration. 8 channels of 25w powered output give you added flexibility. multi screen controller similar to its brother, the pxe-x09, the new included controller has independent feature screens allowing you to have greater visibility to settings and adjustments including sub control.
Specifications:
| Part Number | PXE-0850X |
Reviews:
Where do I start? I replaced a Rockford Fosgate DSR1 with this and it�s INCREDIBLE. Let me get my couple gripes out of the way before I get into the good stuff. The inputs and outputs are on the top and bottom instead of the sides like the amps are, so it complicates cable management, it doesn�t handle a true 4V preamp voltage, and it doesn�t have an AutoEQ. The voltage issue is EASILY overcome with the Remote Commander though because it defaults to volume control and you can just set the head unit to 2.63V RMS with a test tone and leave it. It has tuning options GALORE, the sound quality is FAR superior to the DSR1 because it�s richer, more powerful, cleaner, and crisper. It INCLUDES the Remote Commander module and Bluetooth module where other high end DSP�s require those items to be purchased separately adding more cost to an already more expensive processor that really doesn�t have many more capabilities. I love this PXE-0850X despite my few gripes. Coming from a professional installer, I HIGHLY recommend this unit for both cost effectivity and quality. The chassis on it is actually made of cast aluminum rather than plastic like some other inferior units are. I can�t say enough good things about it actually. DSP technology has become so inexpensive, your system can�t afford to be WITHOUT it! Get either this or a PXE-X09 and be done.Jeffrey
4. Behringer Nx3000d Power Amplifier With Dsp
Product Details:
Lightweight (at 7.9 lb) and compact, the rackmountable behringer nx3000d is a stereo power amplifier with high-performance dsp capable of delivering 440w of peak power per channel into a pair of 8-ohm speakers, and in bridge mode, up to 1500w of peak power into an 8-ohm speaker. it employs smartsense loudspeaker impedance compensation technology combined with a switch-mode power supply and zero-attack limiters to provide a 20 hz to 20 khz, linear frequency response with noise-free audio and fast transient response, at maximum output power, into any speaker load impedance. the nx3000d features cool-running, high-density class-d technology with near-zero thermal buildup, and an independent dc, lf, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. a continuously variable speed fan and ventilation openings with back-to-front air flow further prevent overheating. the amplifier offers built-in dsp with 24-bit/96 khz converters, which ensure signal integrity with a broad dynamic range. the dsp section features delay, crossover, eq, and dynamics processing. the security settings are lockable to prevent unwanted changes. the unit has a rear-panel usb port that allows setup, control, and monitoring from a computer with behringer's free remote software (available separately). the amplifier's lcd display offers a convenient way to perform setup and adjustment tasks without a computer. simple to operate, the nx3000d's front panel is equipped with two detented and illuminated gain control knobs for precise level setting. the back panel houses two xlr-1/4" combination input connectors compatible with any line-level, balanced and unbalanced sources. twist-lock speaker connectors provide reliable connections to your speaker cables.
Specifications:
| Display Type | LCD |
| Number of Channels | 2 |
| Power Output | 3000 watts |
| Impedance | 4 Ohms |
| Weight | 7.9 lbs |
Reviews:
Picked up this amp to use for tactile in simracing I have it running from speakon to banana plug hooked up to the miata diff known as the buttkicker LFE. Everything is straight forward with no issues and easy to setup,there is software for finer control over the HZ sent to the output. Some say the fans are noisy but I was not fussed but you do have the option to buy aftermarket fans to change them if you wish. There is no USB Type A cable included for connection to the PC which for the price was odd. But any home musician or household has billions of these strung about from old printers and midi devices anyway. All round not much you can say other then it does what it is meant to do at a price point far better then its competitors.Ryan T.
5. Sonance Sonamp Dsp 2-150 Mkii Amplifier
Product Details:
Create an exciting party atmosphere with this sonance dsp amplifier. the advanced room correction technology offers hundreds of eq presets that let you customize audio setup effortlessly via simple pull-down menus, and reliable digital-to-analog conversion provides high-resolution sound from a variety of sources. this sonance dsp amplifier has a compact design that offers convenient portability. 300w total power rms rating of 150w x 2 at 8 ohms, 2 channels driven for robust audio. 8-ohm impedance efficiently conducts power. rack-mountable design offers flexible placement options. sonarc (sonance advanced room correction) provides a 10-band parametric eq to optimize sonic performance in any space.
Specifications:
| Weight | 11 lb |
Reviews:
Excellent amplifier, works as expected. Easy setup.BobSz
6. Dayton Audio Dsp-408 4×8 Dsp Digital Signal Processor For Home And Car Audio
Product Details:
Specifications:
| Piece Count | 1 |
| System of Measurement | U.S. Customary |
| Count Per Pack | 0 |
| Contained Battery Type | 14 |
| Compatible Brands | Dayton Audio |
Reviews:
Great product! It is compact and solidly built. I'm using it in a home audio system and controlling it directly from my Windows 11 laptop. The computer dashboard is easy and intuitive to use. I have no way to confirm it but believe the dashboard accurately describes the performance of its filters. In other words, I believe it is well-calibrated. It maintains the latest settings when the computer is not connected but the 12V power adapter must remain connected. Two are necessary for a 5.1, 7.1 or 5.1.2 surround sound system, or for a 3-way or 4-way active stereo system.marty NCA
The Good: It's an inexpensive DSP. The software is pretty easy to use, the main thing that would make it better is giving more than 10 EQ points per output to allow for better tuning, most DSP's have 31 bands. The bluetooth module is convenient if you want to do some adjusting when you don't have a laptop handy, or to puck a different preset if you do not have the wired remote. The wired remote is almost a must, unless you are a set it and forget it person. Easily choose presets and adjust the volume (I still used my amps remote to control the sub output) The Bad: I have this installed in my car, factory head unit running into a Kicker KeyLoc into the DSP-408 and I just can't get rid of the hiss coming from my speakers. I thought it was the radio, eliminated that as a source, thought it was the KeyLOC, but even with no input to the DSP there is still hiss from my tweeters. Other "fixes" I've tried: checking the ground run a different power than the ones my amps share 2 different wired remotes bought the bluetooth module, thinking that would bypass any input issues using the 110V power supply it ships with. installing a ground loop isolator 20-ohm resistors from the radio uninstalled everything and rewired my whole system looking for issues disconnecting the USB wire disconnecting the wired remote If I disconnect the RCAs to my amps everything quiet again. I can tolerate the remote knob up to about 40, at 60 you can hear the hiss even though the music or road noise. I can not simply turn up my amp gains (which are at maybe 20%) because it just amplifies the noise. I've spent over $100 and countless hours on stuff trying to fix a problem that can not be fixed, at least not with my unit. I've read some people just kept sending their unit back for replacement until they get one that is quiet. I think I'll just cut my loses and time and buy better equipment. It's pretty pointless going for an SQ build when there is a constant background noise in your system.Mark
I purchased this this unit to replace a different brand DSP that was introducing unwanted distortion. I had read reviews on this unit and saw many mentions of background hiss or a hum typically caused by a ground loop (poor grounding). I thought maybe these people hadn't taken the proper steps to ensure they had a properly grounded system or they were using cheap RCA cables. I connected the unit in place of my previous DSP which was a cheap unit but had no noise issues. The sound quality while my vehicle was off was excellent and I had no background hiss or noise. I messed with some settings via the PC program and its very easy to use. Unfortunately this was short lived after starting my vehicle. There was a constant low frequency hum and a high pitched whine that increased in frequency when my engine RPM increased. I decided to try some troubleshooting to verify there was no issues with my install. I decided to run a temporary ground and power line directly to the battery just to see if it would help. It did not. Even though I know my connections are very good I decided to go through all of my entire system and verify everything was still secure. (I really wanted this DSP to work) I found no issues with my system connections. I read in one review that someone "resolved" the issue by removing the REMOTE IN connection and having the unit turn on via the RCA signal. Again, no change. I even ran a temporary set of RCA cables with no change at all. When I removed the unit from the signal chain completely there is absolutely no noise at all. I'm fairly certain the issue is not on my end. My system consists of a Pioneer Head unit, Rockford Fosgate amplifiers, Knukonceptz Krystal RCA cables, and Knukonceptz 0 gauge OFC power from the battery to both amplifiers and the alternator and dual 0 gauge grounds on my battery with brand new battery terminals and a new battery. All ground connections have all paint removed and are connected with a gold plated terminal blocks and I apply an electrolytic compound between the terminal block and vehicle that improves and protects the connection. I understand a device maybe being limited in options because it has a lower price point. However I can't understand how a device could be sold with this kind of issue and it hasn't been addressed with an improved design. I would be more than happy to pay an additional $50 if this was resolved in a redesign as it would still come in much cheaper than most other DSP's. PROS: Easy to install, easy to setup and control, great sound quality. CONS: Overpowering hum and whining noise while vehicle is running unfortunately makes this unit unusable for car audio. ??Jeff
7. Ds18 Dsp Crossover & Equalizer 8 Channel Digital Processor Bluetooth Dsp2.8dbt
Product Details:
The dsp2.8bt, our newest digital signal sound processor, gives users access to every bit of power in your vehicle’s audio system, allowing you to gain the control needed to handle and achieve the quality of sound you desire. creating a flawless audio system has never been easier. the dsp2.8dbt gives users access to a list of filtrations settings directly from our bt interface. this interface also gives users option to save presets for certain songs or genres allowing for the perfect listening experience one hundred percent of the time. the dsp2.8dbt car digital sound processor gives you access to a great number of tuning options that can be adjusted using the dsp2.8dbt application on the app store or google play. parametric equalizer with 3 independent band per channel crossover with filters: butterworth, linkwitz-riley and bessel through a didactic and intuitive interface, it is possible do all the processor’s configurations from ds18 by smartphone or tablet, making easier the system alignment, it can be done from your audio system in real time.
Specifications:
| Input Type | Unbalanced |
| Input Connection | RCA |
| Input Max Level | Up to 6 Volts RMS |
| Input Impedance | 47k Ohms |
| Output Type | Unbalanced |
| Output Connection | RCA |
| Output Max Level | 2 Volts RMS |
| Output Impedance | 47k Ohms |
| Resolution | 24 Bits |
| Sample Frequency | 48KHz |
| Latency Frequency | 1.08 Ohms |
| Range Frequency | 15Hz a 22KHz (-1dB) |
| THD+N Max | 0.01% |
| Signal to Noise Ratio | 100dB |
| Pow Supply Voltage | 10 ~ 15 VDC |
| Consumption | 300mA (5W) |
| Fuse | 2 A |
| Length | 9.84“ |
| Assembled Product Weight | 0.84 lb |
| Assembled Product Dimensions (L x W x H) | 10.00 x 5.25 x 1.50 Inches |
Reviews:
So I love this unit. I run all DS 18 pro speakers in my challenger build I'm doing. I even have a sticker aka free advertising until I do my window ceramic next week. I run 4-4" tweeters, 2-6×9, 2-6.5" all on a candy 6. I need something bigger and 8 channel really. But sounds amazing. Paired to a kicker L7 15" in the truck and a ds18 ml headunit. It all sounded so rough and background engine noice. So I went from 4 rca lines (8channels total) to 1 rca(2channel) sounds so much better with my tuning options through the app. By bass is deep and still punchy. My tweeters are just awesome. And between my 6×9&6.5" I can truly make my car sound good with anything playing. I need to find me a 3800 rms 8 Channel for the cab speakers and want to change the 15. Probly 2 12" or 10" subs. Either would hit harder then the 1 15. All in all after you spend some time learning the dsp. I'm 100% satisfied with it and will consider a 10-14 Channel one eventually since I'm still mid build and keep adding stuff lol. At close I just say 1 thing…just buy it and spend the time to learn it.Joshua F.
8. Universal Audio Uad-2 Octo Core Pcie Dsp Accelerator Card
Product Details:
The uad-2 octo core from universal audio consists of a short form pcie (express) card with eight sharc processors for use in either mac or windows based native audio workstations. the card supplements the dsp processing of these systems, giving the computer's cpu more headroom and freeing resources for other functions that can include additional tracks, heavier mix automation, or the ability to use more native effects. analog classics is the "core" part of the uad-2 octo core, a software bundle included with the card. it features four of the company's most popular plug-in emulations that capture the essence of the analog hardware counterparts. the la-2a classic audio leveler features the sound of the classic electro-optical analog compressor, while the 1176ln classic limiting amplifier is an accurate emulation of ua's legendary fet-based hardware. the 1176se limiting amplifier is a dsp-optimized version of the 1176ln, yielding higher instance counts while featuring its own unique characteristics. the pultec eqp-1a program equalizer plug-in is a faithful electronic reproduction of the renowned hardware eq. realverb pro is a flexible and natural sounding reverb plug-in based on a unique set of algorithms, allowing the user to design the room just as they hear it. the uad-2 octo supports the use of other manufacturer's audio units, rtas or vst plug-ins when used with the appropriate host software. additionally, up to four uad-2 cards can be used simultaneously in a single host computer, or combined with other uad-2 devices, including the uad-2 satellite (firewire), and apollo audio interface.
Specifications:
| Form Factor | Internal Card |
| Built-In DSP | 8 x Analog Devices SHARC Floating-Point |
| Host Connection Protocol | PCIe |
| Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz |
| Included Plug-Ins | Yes |
| Storage Requirements | 2 GB |
| Minimum Display Resolution | 1024 x 800 |
| Internet Connection | Required for Registration, Plug-In Authorization |
| Box Dimensions (LxWxH) | 12.1 x 9.2 x 2.4" |
Reviews:
I already owned the Apollo Quad and love the Universal Audio plugins. When I found myself wanting more and more UAD plugins the processing limit of the quad became a burden. With 8 more cores now it feels like I can endlessly pile on those beautiful UAD plugins that emulate analog hardware and there's little load on the native processor. Highly recommend the octo card or thunderbolt attached box if you are using UAD plugins.Beachside Studio
This really hard cause when u have a piece of equipment that is 100 % its hard to gather words that will make it make since but im happier then a baby with a bottle this was what ive been searching for an i must say THANK YOU like i said i cant explain this but what it does is incredible (Perfect )JOSEPH FOREST
Does the job as labelled on the tin. The only thing that upset me a little, is that UAD were running a deal on the other versions of the Octo's where you got 6 free plug ins of your choice bundled in. But in the end of the day, got to buy what is compatible with your system. Looking forward to using the Octo in the near future.Reviewed by Andertons Music Co.
9. Ds18 Dsp4.8btm 4-Channel In And 8-Channel Out Digital Sound, Water Resistant
Product Details:
The dsp4.8btm, our newest digital sound processor, gives users access to every bit of power in your vehicle’s car audio system, allowing you to gain the control needed to handle and achieve the quality of sound you desire. easy to use software found on google play or the app store to fine tune and monitor every aspect of your signal processing. users have access to a list of filtrations settings directly from our bt interface. this interface also gives users option to save presets for certain songs or genres allowing for the perfect listening experience one hundred percent of the time. through a didactic and intuitive interface, it is possible do all the processor’s configurations from ds18 by smartphone or tablet, making easier the system alignment, it can be done from your audio system in real time. ds18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
Specifications:
| Routing Options | A / B / C / D / A+B / A+C / B+C |
| GAIN | GAIN / GANANCIA |
| General Gain | -53 to 0dB |
| Channel Gain | -33 to +9dB |
| Cutoff Frequency | 20Hz to 20KHz |
| Types of Cuts | Linkwitz-Riley / Butter worth / Bessel |
| Attenuations | 6 / 12 / 18 / 24 / 36 / 48dB/OCT |
| Gain | -12 to +12dB |
| Q Factor | 0.6 to 9.9 |
| Time | 0 to 18,95ms |
| Distance | 0 to 6500mm |
| Threshold | -54 to +6dB |
| Attack | 1 to 200ms |
| Release | 1 to 988ms |
| Phase | 0 or 180o |
| Memories | 3 – 100% Configurable |
| Input Channels | 4 |
| Connectors | RCA |
| Input Impedance | 100KΩ |
| Output Channels | 8 |
| Output Impedance | 100Ω |
| Frequency Response | 10Hz to 24KHz (-1dB) |
| THD+N | <0,01% |
| Signal Latency | <0,6ms |
| Bit Rate | 32Bits |
| Sampling Frequency | 96KHz |
| Voltage DC | 10~15VDC |
| Maximum Consumption | 300mA |
| Height x Length x Depth | 1.6" x 5.6" x 4.25" / 41mm x 142mm x 108mm |
Reviews:
Outstanding Bluetooth Dsp. Control center for any car audio build!Douglas B.
its a decent DSP. being it is app controlled makes tuning much easier than a dial or having to use a laptop. I am unsure what to think of the app itself. I feel it is very basic lacking controllability and features I feel any DSP should have. for a basic system it will get the job done and even some more complex. Lack of good user guide is a big thumbs down at any price and probably would have kept me from purchasing it if I had known. Also no remote out is a big – . its small light weight and convienent and is would be best IMO for powersports or simple builds. To be fair I went from a Hertz h8 to this so my opinion on the app's controllability is partially influenced by that. Is it worth the price? I have not had it real long but so far I would say absolutely yes it is a good buy and would be great for your first introduction to using a dsp. Would I buy again ? depends on the build I would be using it for but yes.Lance A.
10. Dayton Audio Dsp-Lf Low Frequency Dsp Controller
Product Details:
Add low-frequency dsp to your current audio system that tailors your subwoofer to fit the bass sonic characteristics to meet your desired sound easy to use android and ios mobile smart phone app enables you to adjust all dsp features from the palm of your hand simply insert the dsp-lf hardware module between your receiver with a sub output and your sub to instantly gain dsp capabilities package includes dsp unit, 2 x 3.5 mm to rca cables, micro usb cable, usb wall power adapter dayton audio's dsp-lf low frequency dsp controller gives you the power to revolutionize your home theater or listening room's low-end dynamic using digital signal processing. easily integrate the dsp-lf into an existing audio system and take control over your bass response all from your smart mobile device. in tandem with the free iwoofer, andriod/ios app, the dsp-lf puts you in control of your bass's sonic character, tailored perfectly for the sound you desire.
Specifications:
Reviews:
I added the dsp-lf to my home theater setup about 6 months ago after acquiring some etymotic earbuds. The extremely accurate etymotics made my ears much more aware of the inconsistent frequency response of the subwoofer bass in my home theater setup. I added the dsp-lf in between my pioneer vsx-lx303 and martin logan dynamo 1000 subwoofer (+/- 3db lower end extension = 22hz). The sub is comparable to most sealed subs under $700 on the market today. The dsp-lf objectively tamed the peaks and now I the lower octaves subjectively sound "right" and the sound is much more immersive. See the first attached image to check the corrected linear frequency response at my listening position (red line). See the second attached image to visualize the corrected response with an added 5 db low end house curve added (green line). The red line in the second image represents the frequency response in my wife's seating position. The fact that the iphone mic and dsp-lf software can show a large difference between the response at my own seating and my wife's assures me that the system is working well. Maybe I need to get another sub so my wife can get a smoother bass response….New User
Very disappointed with this device. The iwoofer app is appalling. It has many user interface issues, but the main one is the bizarre preset saving process. If you make any changes to your settings and don't save it these will be lost as soon as you power off the DSP-LF. You have to save it. But there isn't a an option to 'save' your current file – you have to 'save as' a new file. The app won't tell you, but this will now be set in the DSP-LF and will load up when you next switch it back on again. Of course before long you have 15 different preset files in the app. There is a permanent high pass filter that can only be set as low as 20Hz. This results in a cut of about 3-6dB at 20Hz, Dayton Audio said in a response to me that this can be fixed by adding in a band e.q. at 20Hz and boosting to compensate, and that they are working with the app designer to fix this. That was a year ago and nothing has changed. Lastly there are issues with the box itself. The connections are all using the tiniest versions of the connectors available – USB-micro and two stereo mini-jacks. These are all soldered directly on to the PCB. So after 1-year of use the USB socket in mine came clear out, attached to the end of the USB cable. In short this device is the cheapest of cheap rubbish and has turned me off Dayton Audio completely as they look like total chancers from my perspective.
I've been using room correction in an older Pre/Pro and I've never been happy with my dual subwoofer setup. For a small investment I decided to try the Dayton Audio DSP-LF hoping it would solve some (or all of the issues) I've been experiencing. I’m using an iPhone, so I installed the iWoofer Pro app as it's able to perform automatic room correction on my dual subwoofers. After consulting Parts-Express it was determined I would only need a single DSP-LF. As the included cables are not the best I decided to upgrade to a premium 3.5mm Stereo Male to 2RCA Female 22AWG Cable (gold plated) and a 3.5mm Stereo Male to 2RCA Male 22AWG Cable gold plated as well. The user manual from Dayton Audio is a must read for understanding how to best optimise the DSP-LF before running the iWoofer Pro auto room correction Wizard. After performing the calculations and using the Linear correction I was simply amazed at the improvement in bass. Not only is the bass significantly tighter, with lower extension, but I’m also able to hear delineation of the individual bass notes that I didn’t think was possible. Before the correction curve I had a +11db peak at 90hz and a -6db trough at 30hz which negatively impacted the sound quality of bass. For movies or music that require a touch more bass extension or punch, I was able to create separate PEQ correction curves that can easily be saved and implemented when necessary. Please keep in mind that the iWoofer Pro software isn’t the most intuitive and trial and error during the measuring and correction phase will definitely be necessary.Rocco
11. Jbl Dsp Amplifier Dsp4086
Product Details:
Specifications:
| RMS Power Output (Watts x Channels) | 40 x 8 |
| Power at 2 Ohms (Watts x Channels) | 60 x 8 |
| Minimum Impedance Unbridged | 2 |
| Best Frequency Response | 10-22k Hz |
| THD at Rated RMS Power | 1% |
| Signal to Noise Ratio | 90 dB |
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 20-20k |
| Low-Pass Slope (dB/octave) | 6, 12, 18, 24, 30, 36, 42, 48 |
| High-Pass Crossover Frequency | 20-20k |
| High-Pass Slope (dB/octave) | 6, 12, 18, 24, 30, 36, 42, 48 |
| Bass Boost | No |
| Fan Cooled | No |
| Fuse Rating | 40 |
| Speaker Level Inputs | Yes |
| Preamp Outputs | No |
| Width (inches) | 5-11/16 |
| Height (inches) | 2 |
| Depth (inches) | 9-3/8 |
| RMS Power Output 4Ω | 40W x 8 |
| RMS Power Output 2Ω | 60W x 8 |
| Operating Voltage | 8V – 16V |
| Signal-to-Noise Ratio | 90dB |
| Signal-to-Noise Ratio (CEA-2006) | 75dB |
| THD+N @ 4Ω | <1% |
| Input Sensitivity Low Level | 680mV – 6V |
| Input Sensitivity High Level | 1.6V – 15V |
| outputs | 8 powered and processed |
| adjustable delay | 0 to 12ms in 0.2ms increments |
| phase adjustment | 0 or 180° |
| fuse rating | 40A x 1 |
| dimensions | 5-11/16"W x 2"H x 9-3/8"D |
Reviews:
Bought 2 of these for my 2022 Acura MDX. Both amps failed to run my 16 speaker system properly.kvngelin
I have 2 Jeeps and both have these installed in them. If you know how to set up a system and want to control everything, this amp is for you. This amp has 6 inputs and 8 outputs. This means you can set each set of speakers to THEIR OWN EQ setting. You must have a windows laptop to set and program this amp or it will not work. This amp allows you to dial everything, EQ, time delay, levels, speaker phasing, and multiple inputs-normal and summing. It may take a while to tune everything but when you get it right, the sound is amazing.chuck_tempe
I was replacing an old JBL MS-8 in my BMW. I originally gutted the entire audio system. So, all the infrastructure was already in place. It was a simple swap of connectors etc. Even if I didn�t have all the various connectors etc in place, it wouldn�t be too bad. I have 2 additional amps in the car. I did not use the filters in the software (high pass & low pass) on any speakers that were already using filters (via the amp). The ability to parallel settings is a nice & time saving feature. My only complaint about it is that the USB connector cable needs to be about 2-3� longer. You do need to set the mixer and tell the DSP what channels you are using and what speakers are powered by each channel. This was not clear in the directions. The software was easy to down load from the JBL website. It can be a little overwhelming to look at, at first. I�d suggest using YouTube / https://youtu.be/CNPjM3Xe7bI The above was a helpful video.matthew
12. Jl Audio Fix-86 Oem Integration Dsp
Product Details:
Fix-86 oem integration dsppthe fix 86 is a state-of-the-art digital signal processor engineered to deliver outstanding sound from factory source units while retaining oem fader control. unlike typical oem interface products the fix 86 automatically corrects time-delayed factory outputs prior to signal summing and eq correction. calibration takes just a single button press and about 30 seconds to complete with no special equipment needed./ppwith a powerful 24-bit dsp processor and quad 1/3 octave equalizers onboard complex factory signals up to 3-way front and 2-way rear are combined and level matched automatically into six full-range stereo signals: front (fader-controlled) rear (fader-controlled) and subwoofer (non-fading front+rear summed) outputs.
Specifications:
| Power Supply Type | Regulated DC-DC SMPS |
| Input Operating Voltage | 10 – 16 VDC |
| Standby Current Draw | < 1.5 mA |
| Operating Current Draw | 0.7 A |
| Recommended Fuse Value | 1 A |
| Input Channels | 8 |
| Input Type | Differential-Balanced |
| Input Voltage Range | 250 mV – 30 V RMS |
| Minimum Input Voltage | 10 mV RMS |
| Input Level Setting | Fully automatic |
| Output Channels | 6 (Front/Rear/Sub output pairs) |
| Analog Output | Unbalanced, stereo RCA jacks |
| Digital Output | Optical (Toslink) output (S/PDIF) |
| Output Impedance | 450 Ω |
| S/N Ratio | 96 dB (A-weighted, referred to 4V RMS output) |
| THD+N @ Rated Output | 0.02% (20 – 20 kHz) |
| Processing Audio Resolution | 24 bit/ 48 kHz |
| EQ Bands for Processing | 30 x 2 channels |
| EQ Resolution | 1/3 octave (25 Hz – 20 kHz) |
| Remote Level Control | Optional DRC-100 or DRC-205 |
| Dimensions | Width = 4.35", Height = 1.88", Depth = 6.15" |
| dimensions | 4-3/8"W x 1-15/16"H x 6-3/16"D |
Reviews:
This product is awesome. I used it in a 2013 Chevy Cruze to replace the factory Pioneer system. This went in before the factory amp to replace it and install a JL XD400/4v2 and a JL XD600/1v1. Tested the rca's with a SMD DD1 after running the calibration set up and got 0 distortion at all volume levels. That's amazing. Usually running a aftermarket system on a factory head unit is a nightmare and sounds horrible, thanks to JL, this is no longer a difficult process. Thanks JL Audio, for once again, pushing the limits. Set up is simple, almost plug and play. Box takes up a little space and fits well with the sleek designs that JL has become to be known for. Using spacers we raised the unit up to run wiring behind it between the two amps. Using a relay, we evenly distributed turn on to each amp and the FiX. Running the Calibration process scared the living day lights out of me, since I wasn't expecting the sound at 75% volume. After a simple calibration process we read all green on the FiX, and continued on with the install. After everything was set up the we tested no distortion at 1000hz and a SMD DD1, then tested the outputs to tune the system to no distortion from the XD400/4 at 75% (35vol) on the HU. The FiX… ""Fixes"" so well in the system, unless the song it self is playing frequencies difficult for the speakers, turning the bass all the way up or mid, or treble, (What I'm limited too on the Chevy MyLink system) creates no muddy sloppy bass notes, buzzing and burping in the doors or rear deck, just clean smooth tones and music. The ONLY suggestion we ran into on the unit after having installed it, was a way for the FiX to detect and aid in the process of dealing with door chimes and voice prompts. Yes the DRC200 will enable a hands free mode, but more to the point, it would still come across the whole system, as well as back up warnings and door chimes. System:: XS Power D4700 JL Audio:: XD400/4v2; XD600/1; C2690tx; XD-PCS2-2B Pioneer:: TSD1730C; 1702R
bought and installed… had alot of trouble with getting a clean sound. returned and sonic confirmed product was faulty. a replacement was sent to me. installed and i am very pleased. with the fix 86 and the customer service. they exchanged it without a roblem once they tested it was defective. thank u so much it works like a dreamps… must combine with drc205 remotejonathan
I'm on a budget so I only own one JL product so far, the fix 86. I searched for months for a device to help me integrate an aftermarket stereo into a vehicle which a head unit replacement wouldn't be financially feasible or make any sense (as the case usually is in cars these days.) The only solution I found was the fix 82/86. This might be the most important part of my build, regardless of how well you tune or how much you spend, if your signal is the weakest link in the chain it'll always sound bad. But my fix 86 brings back the parts of the music I lost due to factory eq settings. After tons of research, I know this is the only product that does this and it does it automatically so it doesn't matter if you're an audio guru or a beginner. I recommend the fix 82 or 86 to anyone who wants to retain the benefits of modern in dash multimedia systems while upgrading the factory audio.
13. Dbx Driverack Pa 2 X 6 Pa Management Processor With Display & Usb
Product Details:
The dbx driverack pa2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. with the latest advancements in dbx's proprietary autoeq and afs algorithms, a new input delay module for delaying the foh system to the backline, ethernet control via an android, ios, mac or windows device and updated wizards, the driverack pa2 continues the driverack legacy of great-sounding, powerful and affordable loudspeaker management processors, for a whole new generation. autoeq new, improved autoeq algorithm ensures an extremely accurate, fast and non-intrusive automatic eq experience. with the rta mic listening" to your room, the new, updated driverack pa2 autoeq algorithm sets speaker levels and room eq automatically in a matter of seconds. this means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise. enhanced afs feedback elimination enhanced afs algorithm for faster, more precise feedback elimination, without adversely affecting your system's tone. nothing turns audiences away like annoying and potentially painful audio feedback. fortunately, dbx engineers have revisited their already-stellar advanced feedback suppression algorithm and made it work even better. the driverack pa2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound. updated wizard setup functions updated wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. wizard functions on the driverack pa2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. helps you easily configure level balancing, autoeq, advanced feedback suppression and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.
Specifications:
| Power Consumption | 22 W |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Output Impedance | 120 Ohms |
| Dimensions | 4.4 cm H x 14.6 cm D x 48.26 cm W |
| Weight | 5.25 lbs |
Reviews:
I just used one for the first time and its a very well designed and relatively easy to use DSP processor. I'm not much of a software programmer and I found this to be relatively easy to use. I set up a sound reinforcement system manually with all of the supplied control blocks, I did not use the wizard setup but I expect it works very well. I will definitely use this device again when the situation allows. 3 inputs and 6 outputs was very handy for my needs. I ran stereo mains, mono sub and 3 discrete outputs to feed program material to other devices in other areas. Thank you DBX for making an amazing product. Michael MoscatelliMichael
Overall: We are a Grateful Dead Tribute band and we are in a different room every night. we have a rather odd speaker configuration. 2 JBL JRX 115s for our high ends, 2 JBL JRX 118’s for our mids and two SoundTech scoops for our bottom end. We demand the best sound we can give our fans and the difference between using a standard crossover and the DriveRack PA2 are night and day! Before getting the crossover and eq’s set was a nightmare and always sounded somewhat muddy. First night with the DriveRack and WOW… Crisp highs, great mids and the punchy bottom end were looking for. Although we can’t use the wizards for speaker and amp setup, going into the preset 13 (3 way stereo) and setting all the crossover points and roll offs was a cinch. Storing this new configuration was easy and painless. Now we walk in set everything up, do an initial gain structure set up without the cabs hooked up and then plug in the cabs. Hit the RTA and select Auto EQ and Level assist and it will tell you what amp and channel (right or left) to raise or lower the attenuation and gives you the db steps to raise or lower! As for quality, this thing is built like a tank! And only one rack space… Tech support was fantastic. I had a few questions and they were patient and precise. If you’re on the road and in a new venue every night this is money well spent! We still haven’t used all the functions, we only run 2 monitors and really don’t push a lot through them so feedback is generally not an issue but, it’s nice to know that if it occurs, we have the tool to fix it. The sub harmonic synth is really not something we need with the scoops, and so far have not tried it. This is not a plug and play device as you will have to read the directions a couple of times to take in all that this unite is capable of doing. But with a little knowledge and careful reading you should have no issues with setting it up! Overall this is the best investment we have made for the band period. We went for good sound to GREAT sound!Allen
Sound: Once installed and configured for the system it is amazingly simple to setup for different venues. The wizards walk you though everything and even tell you how much to boost or cut the attenuaters on your power amps. This is really amazing in clubs that have odd configurations or walls sitting in the way. for example it will tell you to decrease your right top cabinet by 5db if it is needed to correct for the shape of the room. Features: It only takes one rack space at replaces an entire rack of effects and processing units, The feed back suppression is pretty amazing you hear that low level feedback starting and before you can turn and look at it, the feedback is gone. The wizards and android control app are extremely easy to use. The speaker offsets are something I would have never thought of but I am convinced that little details like that are what makes this such an amazing product. Ease of Use: With the wizards it is pretty painless to set-up the only thing I can see that would improve it is to have wireless functionality on-board so that an external router is not needed. Quality: It is sturdy. I expect that short of something drastic happening to still be using this when I get too old to play anymore. Value: In short for a gigging band that is never in the same venue two nights in a row, you cannot afford to not have this if you want clean consistent sound. Manufacturer Support: I had a question regarding my particular speaker configuration and posted a question to the manufacturers site and got an answer almost immediately. The answer was one that I may have figured out on my own given time, but was pleasant timely and accurate. This allowed me to get up and running sooner, with less worry. Thanks DBX! The Wow Factor: Wow is an understatement, our sound is so clean that we even had a club owner mention (as they all seem to do) You were a little loud tonight but with sound that clean it doesn't really matter. Overall: I needed to buy a crossover, I needed to upgrade my EQ and I was interested in automatic feedback suppression because mixing sound from stage is complicated enough. It seemed a good value to get all of that in one unit. The unit is not overly complicated but it is not plug and play either. There are still functions on it I have not enabled (subharmonic synth) due to the fact that we do run sound from stage and I simply cannot listen, play and sing while adjusting them to learn how to use them to the best advantage. From the first gig with it our sound was greatly improved and has only gotten better as we become more familiar with the unit.Lee
14. Audiocontrol Dq-61 6-Channel Sound Processor
Product Details:
Specifications:
Reviews:
15. Behringer Nx1000d Power Amplifier With Dsp
Product Details:
The behringer nx1000d packs impressive power into a lightweight, cool-running unit. this power amplifier delivers 300 watts/channel into 4 ohms, 500 watts/channel into 2 ohms, or a whopping 1,000 watts into 4 ohms bridged, giving you plenty of headroom to work with. experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply. benefit from a linear frequency response at any speaker load, by virtue of the nx1000d's smartsense loudspeaker impedance compensation. zero-attack limiters supply maximum output with reliable overload protection. beyond that, high-performance dsp offers sophisticated delay, a crossover, eq, dynamics processing, and more. the nx1000d includes reliable twist-lock speaker connectors and precise 4-segment led metering.
Specifications:
| Bridged power output | 1000W @ 4 ohms, 620W @ 8 ohms |
| Inputs | 2 x combo jacks |
| Input impedance | 10K ohms (unbalanced), 20k ohms (balanced) |
| Outputs | 2 x speakon type connectors |
| Output circuit type | Class D |
| Signal to noise | >100 dB |
| Cooling | Continuously variable speed fan |
| Amplifier protection | Thermal and DC protection |
| Power supply | 100-120V, 50/60 Hz |
| Power consumption | 150W @ 2 ohms, 1/8 rated power |
| Dimensions | 3.7" H x 19" W x 9.1" D. |
| Output Channels | 2 |
| Weight Range | < 10 lbs. |
Reviews:
Mucho mejor resultado de momento del que esperaba. Relación calidad/precio muy bien
В первую очередь он очень легкий – взял подмышку и пошел или одним пальцем зацепил (буквально). Очень понравились настройки, есть все необходимое чтобы система играла качественно (8 точек параметрического эквалайзера) и была защищена от перегрузок (лимитер в помощь). Различные вариации подключения каждого канала, точно для себя найдешь все что надо. Цена – качество на высоком уровне. Единственное чего не хватает это параллельного линейного выхода, но это на всех усилителях этой серии.
16. Alpine – Pxe-0850s – Advanced Wireless Digital Signal Processor
Product Details:
Boost your audio setup with this alpine digital signal processor. you can combine up to six inputs into one and send it to 12 different channels, and the remote has a rotary knob for quick control. this alpine digital signal processor lets you fine-tune with precise detail for balanced listening. system integration sound processor you can use it when adding amplifiers to a factory or aftermarket head unit. take up to six independent signals combine six low- and/or high-level inputs to create a full-range signal. 12 independent channels features 12 rca outputs for extreme versatility in audio system building. 31-band parametric and graphic equalizer lets you dial down unwanted frequencies and flatten the response to ensure your sound system. up to 20 ms of time delay per channel the sound reaches your ears at the same time. flush dash-mounted lcd remote controller included provides quick and convenient control of your sound system. usb and bluetooth connectivity allows you to easily custom tune your system from a smartphone, tablet or pc.
Specifications:
| Connectivity | Wireless |
| Number of Output Channels | 12 |
| Bit Rate | 32 |
| Speed | 300 MHz |
| Frequency Range | 20Hz – 20KHz |
Reviews:
The user manual isn't very detailed. It doesn't describe input/output gain settings for various input/output voltages. I found out with trial and error that i could use the "matrix mixer" as my input gain sensitivity. I was having distortion at higher volumes due to level matching with my line out converter. The phone app is simple to use, the Bluetooth quality is very good (if you want to use it for streaming directly). Overall great value I'm happy with it for the price.dgri2248
17. Taramps Pro26s Car Digital Audio Processor With Dsp 2 Inputs & 6 Independent Outputs
Product Details:
Get the ultimate sound experience with this taramps 900727 pro 2.6s digital audio processor. with dual inputs and 6 outputs, this car sound system accessory gives you the versatility and customization you need for consistent, clear sound quality. this multi-functional sound processor has an easy-read digital screen, turn-dial for making specified adjustments, and includes portuguese, spanish, and english languages. boasting 2 inputs and 6 outputs, this multi-channel amplifier offers functions such as routing, filters for crossover, delay adjustment, alignment, phase inversion, adjustable limiter, output parametric equalizer, spreading, mute, sine wave generator, and factory default memory positions. with 47 ohms and a frequency range of 20hz to 20khz, you'll have the complete package to boost your sound for optimal listening. roll those windows down, and turn up the tunes with the taramps 900727 pro 2.6s digital audio processor.
Specifications:
| Input impedance | 18,000 ohms |
| Output impedance | 47 ohms |
| Maximum input/output level | 6Vpp/10.2Vpp |
| Frequency response | 10Hz-20kHz |
| Frequency range | 20Hz-20kHz |
| Signal-to-Noise ratio | Greater than 90 dB |
| Crosstalk (separation between channels) | Greater than 80 dB |
| Power supply voltage | 9-16VDC |
| Input/Output channels | 2/6 |
| Routing | A, B, A+B |
| Master level | 80-0 dB |
| Output level | 24-+6dB |
| Delay | 5.7 mS |
| Phase | 0/180-degree |
| Gain | -60-0 dB |
| Memory positions | 3+ factory default |
| Dimensions (W x H x D) | 1.7 x 8.3 x 4.8 inches |
Reviews:
thank you for servcuefrocpa
Buen precio y de buena calidadheribertveg_31
I use this as the low-level crossover for a bi-amped home sound system. It provides other nice features like some bass boost (using the parametric equalizer) and delay for voice-coil alignment. I took off one star because the signal-to-noise, although quite good and definitely fine in a car, is insufficient for a quiet home setting and forced me to add a quad potentiometer as volume control. The user interface has some lag and confusion but that's OK given the low price.agropper123
18. Audiocontrol Dm-608, 6 Input 8 Output Dsp Matrix Processor
Product Details:
Audio control dm-608 digital signal processor 6 inputs 8 outputs audiocontrol designed their dm-608 digital signal processor to integrate into just about any car stereo system, to correct factory sound processing, and to deliver customized, high-fidelity audio to your aftermarket amps, speakers, and subs. you make adjustments and save settings via your laptop (pc or mac). the smart-user dsp software package includes linkwitz-riley crossovers, 30-band graphic equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, accubass bass correction, and real-time analyzers (rta) for the inputs and outputs so you can visually confirm the improvements in the sound. the dm-608 is "matrix-able," giving you the ability to combine and route any input to any output. so, if your car's factory system has separate pre-filtered, time-aligned, or amplified signals going to factory subs, mids, and tweeters, for instance, the dm-608 can combine them into one smooth, unified signal for you to balance, align, and tune for your better-sounding. all controls and adjustments accessible on your laptop (pc or mac) via usb connection (audiocontrol's smart-user dsp software included). usb cable included control via android and ios devices requires an audiocontrol ac-bt24 bluetooth adapter. variable high-pass, low-pass, and bandpass filters (20-20,000 hz at 12 or 24 db/octave) 30-band graphic eq, parametric filters, phase correction.accubass circuitry for improved bass response. time delay/alignment for inputs and outputs rta (real-time analyzers) for inputs and outputs. optional wired remote controls volume, selects sources, and recalls up to four presets. milc(maximum input level control) led optimization and clip indicators.
Specifications:
| Product Type | Audio signal processor |
| Recommended Use | Car |
| Form Factor | External |
| Sound Output Mode | Stereo |
| Equalizer | Yes |
| Input Channel Qty | 6 channels |
| Output Channel Qty | 8 channels |
| High Level Inputs | Yes |
| Crossover | Active crossover |
| Crossover Slope | 24 dB/octave |
| Additional Features | Time alignment |
| Connector Type | USB 6 x audio line-in (RCA) 8 x audio line-out (RCA) SPDIF input (TOSLINK) SPDIF input (RCA) Speakers input Remote control input DC power input |
Reviews:
This DSP is amazing! I cannot believe how much better my car audio sounds. Money well spent!leonarbutle_4
Took my system to a whole new level. If you are serious about car audio, you already know about audio control. Lolphanoflife
19. Rockford Fosgate 8-Channel Interactive Signal Processor – Dsr1
Product Details:
Replacing the factory amplifier and speakers in select ford and chrysler vehicles just got easier with the rockford fosgate dsr1 signal processor. this module allows you to control the audio output and settings with integrated bluetooth 4.0 when connected to your i os or android device. you'll retain factory controls and notifications and still be able to gain superior sound quality out of your speakers. you'll be able to use this with speaker level inputs or rcas depending on your particular setup. fine tune your audio setup with the rockford fosgate dsr1 signal processor.
Specifications:
Reviews:
I ordered a Rockford Fosgate DSR1 to install with a Rockford Fosgate Stage 3 kit in my 2019 Road Glide Special. Garage Bagger Stereo delivered it lightning-fast, and with the correct file for my installation loaded. For anyone doing this same install, I used 3M adhesive-backed velcro to attach the DSR1 to the underside of the amp bracket (and further secured it with some zip ties.) There isn't a surplus of space inside the fairing, but it all fit. I'm very pleased with the results and I have already recommended the product and supplier to friends.William
I found it to be very easy to install, as I was running it between my Kenwood DNN992 and my two Rockford Fosgate amps (400×4 and 500×1). The only two drawbacks I had were: 1) There are only 4 RCA-level inputs and 8 RCA-level outputs on the DSR1. Which meant that I had two options for system control – either run my RCAs directly from the sub RCA output on the radio to the subwoofer amp, or not use the sub RCA output on the radio, and instead run my RCAs from the DSR1's sub output to the subwoofer amp. I opted for the former (but may decide later on to go with the latter. 2) Setup, while straightforward, was "laggy". By that, I mean that after downloading the app to my Android tablet and connecting the DSR1 to it via bluetooth, response time between both devices was noticeably delayed. I would adjust some of the EQ sliders and it would take anywhere from 5-10 seconds before you would hear the end result or the DSR1 would acknowledge the change. Overall, though, I am enjoying it immensely, and look forward to further exploring it's features (and there's a LOT).nubiannupe
I purchased a Rockford Fosgate DSR1. I received it with a tune already set up. I called American Hard Bag with an issue. I spoke with a tech right away and they solved my issue over the phone. A+ for great customer service. I’m extremely happy with the product and it’s performance. I highly recommend American Hard Bag as they stand behind the products they sell.Edgardo N.
20. Audiocontrol Dm-810 8 By 10 Channel Matrix Digital Signal Processor
Product Details:
Signal processing makes it sound exactly the way you want smart-user dsp tuning software on a laptop audiocontrol designed their dm-810 digital signal processor to integrate into just about any car stereo system, to correct factory sound processing, and to deliver customized, high-fidelity audio to your aftermarket amps, speakers, and subs. you make adjustments and save settings via your laptop (pc or mac). awesome audio adjustment the smart-user dsp software package includes linkwitz-riley crossovers, 30-band graphic equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, accubass bass correction, and real-time analyzers (rta) for the inputs and outputs so you can visually confirm the improvements in the sound. the matrix is your friend the dm-810 is "matrix-able," giving you the ability to combine and route any input to any output. so, if your cars factory system has separate pre-filtered, time-aligned, or amplified signals going to factory subs, woofers, mids, and tweeters, for instance, the dm-810 can combine them into one smooth, unified signal for you to balance, align, and tune for your better-sounding aftermarket speakers. convenient features onboard leds indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distorting. an optional acr-3 wired remote controller lets you select sources, control levels, and recall up to four preset tunings from your front seat. an optional bluetooth adapter lets you stream music and control the digital processing wirelessly from your compatible portable device.
Specifications:
| Product Type | Audio signal processor |
| Recommended Use | Car |
| Form Factor | External |
| Sound Output Mode | Stereo |
| Equalizer | Yes |
| Input Channel Qty | 8 channels |
| Output Channel Qty | 10 channels |
| High Level Inputs | Yes |
| Crossover | Active crossover |
| Crossover Slope | 24 dB/octave |
| Additional Features | Time alignment |
| Connector Type | USB 8 x audio line-in (RCA) 10 x audio line-out (RCA) SPDIF input (TOSLINK) SPDIF input (RCA) Speakers input Remote control input DC power input |
Reviews:
I have been wanting one of these for so so long and to finally get my hands on one I feel blessed. Anyone who has a OEM system ( or not ) and wants to get the most out of their system should have one of these in their vehicle this thing is absolutely phenomenal! I would truly have to say this is hands-down the best processor Ive ever owned! Easy to use easy to navigate. This is a must-have for any installer, Enthusiast, audiophile. I would recommend this product over anything else on the market at this time and I have had my hands on a lot of different products.demetrius783
not very many reviews for this product, so here is my 2 cents. good build quality . very easy to install. There is a bit of a learning curve as far as using the software, at least there was for me, but if you have experience with DSPs you should be fine. Once i got a better understanding of how the software works i could not be happier with the Audiocontrol DM810. it does a very effective job at cutting out all the low bass frequencys from my door speakers ,as it should. i have noticed with other built in crossovers and amplifier crossovers that they tend to let some bass in and ultimately end up distorting my sound. Not this unit, when it is set to cutoff under 100Hz ,its cut off! The time alignment is great and was very easy to set up. what i love best about the unit is the 30 band EQ, with a RTA mic and some pink noise tracks you can really get your sound at its best. The auto EQ feature is great for overriding the factory radios preset EQ curve and will send a nice flat signal to the DSP. This thing for me was worth the money. Highly recommend this to anyone wanting ultimate control of their sound.Jerry
