When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
Best Dust Collector For Home (2024 Update)
With more people working from home these days, keeping your workspace clean and dust-free is more important than ever. But let’s face it – dust can accumulate quickly, especially if you have pets or live in an older home. This is where a quality dust collector can be a lifesaver. But with so many options on the market, how do you know which one is right for your needs? Here are some key factors to consider as you shop for the best dust collector for your home.
First, think about the size of your workspace and how much dust you typically generate. Do you have a dedicated home office or craft room? Or just a small desk area? The capacity of the dust collector should match the amount of dust you need to remove. Similarly, consider the types of dust-producing tools and materials you use. Routers, sanders and printers produce fine dust particles that some collectors are better at trapping.
You’ll also want to think about noise level and efficiency. Look for dust collectors with quiet motors and high CFM ratings, which indicate strong suction power. And consider special features like filters, self-cleaning mechanisms or movable inlets that can make the system more convenient to use.
Finding the right dust collection system takes some thought. But a high quality unit can keep your home workspace clean and safe for years to come. Do your homework, set a budget and choose a system that best suits your home and work needs. Your lungs will thank you!
20 Best Dust Collector For Home (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
Features:
- 5.7-amp brushed motor combined with the 6-inch impeller moves up to 660 cubic feet of air per minute
- 4-inch dust port allows for connection to your favorite woodworking tools
- Compact design includes an onboard carrying handle for easy storage and transportation
Reviewers Noted:
Build quality . Weight . Cleaning . Noise level
Features:
- Ideal for use on the go thanks to compact dimensions, low weight, and robust chassis
- Touch operation for intuitive control of the mobile dust extractor
- Externally accessible main filter for easy replacement
Features:
- The g8027 manual was written by our u.s. based technical documentation department and is packed with useful information.
- The complete and easy-to-read manual provides full instructions on how to assemble and maintain your dust collector.
- Made in an iso 9001 factory.
$313.39
4.7
Features:
- Attach up to two tools at a time with the dual 4-inch air inlets
- Vertical collection bag holds up to 50 gallons of debris and wood chips
- 16-amp motor creates over 1,500 cfm of dust extracting power
Features:
- 5 micron bag has 2 cubic feet capacity
- Features window to gauge how much dust is in bag and bottom zipper for easy dust disposal
- 44-inch height with bag inflated
$339.99
4.1
Features:
- Optional 5-micron bag (#20431, sold separately) offers finer particle retention.
- Optional canister filter (#53522, sold separately) filters down to 1 micron.
- Not recommended for use with plumbed-in, multi-branch dust collection systems.
Features:
- Circulate up to 1,300 cubic feet of air per minute
- Attach up to two tools at a time with the dual 4-inch air inlets
- Vertical collection bag holds up to 50 gallons of dust
$1699.99
4.0
Features:
- Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
- Double paddle manual cleaning system quickly cleans the pleated filter
- Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
$399.99
3.8
Features:
- Dust collection keeps your shops air breathable
- 1 hp tefc motor
- 10" blower wheel diameter
Features:
- 1 x 9' dust scoop
- 1 x port boom arm
- 1 x 15' vertical mounting post
Features:
- Continuous duty: permanently lubricated, totally enclosed, fan-cooled motors.
- Fast debris removal: quick-connect collection bags with elastic band.
- Vortex cone technology: improves chip separation and collector bag packing efficiency.
Features:
- The cone eliminates premature filter clogging for sustained performance
- Turbocone improves chip separation and collector bag packing efficiency
- Remote-controlled digital timer can be programmed for up to 99 minutes
Features:
- Motor size: 1 hp, 120v/240v, single-phase, prewired 120v
- Motor amp draw: 7a at 120v, 3.5a at 240v
- Intake hole size: 4"
Features:
- Powerful 7.4-amp induction motor combined with the 9-inch impeller moves up to 600 cubic feet of air per minute
- 4-inch dust port allows for connection to your favorite woodworking tools
- Measures in at 43.3 x 17.7 x 20.1 inches in size with a weight of 41.1 pounds
Features:
- Autoclean automatic main filter cleaning system with infinitely adjustable cleaning intervals for consistently high suction power
- Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting systainers to the mobile dust extractor
- Antistatic function prevents static developing during work
Features:
- Quick-install collection bag: emptying and re-attaching is a snap.
- Quiet operation: 1-hp motor produces just 65 to 70 db of noise.
- Portability: includes four casters (two rolling and two fixed).
Features:
- The air drawn in by the dust collector is filtered through a cloth collection bag that can be removed and emptied when full.
- A simple mounting bracket allows you to hang this dust collector on the wall, mount it to a bench or on the floor. very versatile!
- Made in an iso 9001 factory.
Features:
- Rated for continuous duty: permanently lubricated, totally enclosed, fan-cooled motors.
- Fast installation and removal: quick-connect collection bags with elastic band.
- Quiet operation: single-stage design produces just 70-80 db of noise.
$400.00
4.9
Reviewers Noted:
Weight . Build quality . Noise level
Features:
- New! smooth sleeved anti-static hose
- Hepa certified filter
- Tool-triggered auto-on operation
Features:
- Motor: 1.5 hp, 110v, single phase, 3450 rpm, 15a
- Intake hole size: 6"
- Filtration: 1 micron
1. Wen Dc3401 5.7 Amp 660 Cfm Rolling Dust Collector With 12 Gal. Bag And Optional Wall Mount
Product Details:
Remember when you had the sawdust in your woodshop under control. keep your work area clean and organized with the wen 12 gal. the brushed 5.7 amp motor combined with the 6 in. nylon impeller circulates up to 660 cub. ft. of air per-minute. this design also features easy-access carbon brush caps for straightforward routine maintenance. the 4 in. dust port inlet lets you connect a standard 4 in. dust hose to your favorite woodworking tools. the 4 1-3/4 in. swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs.
Specifications:
| Weight (lbs.) | 17 |
| Wet/Dry | Dry |
| Locking Casters/Wheels | Yes |
| Self-Cleaning | No |
| Hose Diameter | 4-in |
| Max Capacity | 12-gallon |
| OSHA Compliant | Yes |
| Amperage | 5.7 |
| Length (Inches) | 34.25 |
| Height (Inches) | 14.2 |
| Static Water Lift (Inches) | 0 |
| Voltage | 120 |
| Width (Inches) | 13 |
| Automatic Shut-Off | No |
| Filter Type | Polyester |
| Air Flow (CFM) | 660 |
Reviews:
I didn't notice when I first turned it on but now that I have it mounted on my wall, it vibrates a lot and makes a lot of noise with the metal wall. It shakes the whole wall. I may have to put it on the floor. Update: Even on the floor it makes a lot of noise, more than any of my other equipment. I can't use this.smart1iam
very happy with this purchase – perfect size and pretty quiet. Solid product!1234
2. Festool 574831 Dust Extractor Ct 15 Hepa
Product Details:
Ideal for cleaning construction sites, workshops and offices: with a 15 l container volume, the festool cleantec ct 15 extracts dust, dirt and water. its design ensures that almost the entire container volume can be used for long periods of work without having to change the filter bag. clever equipment. for the ct 15, the crevice nozzle and upholstery nozzle cleaning accessories are in the items included and can be stored in the mobile dust extractor. the flat storage area means that work materials and other aids are always within reach. keep working. festool ct 15 e dust extractor has a high suction power due to adjustable high-performance turbine. additionally allows work to be carried out uninterrupted for long periods as the entire 15 l container volume can be used. compact and robust. with compact, stable design and a chassis with steel axles. the ct 15 is logically designed for a long service life and robustness. cleaning accessories directly included. crevice nozzle and upholstery nozzle can be stored in the mobile dust extractor. simple transport. the mobile dust extractor can be moved conveniently using the telescopic handle. additionally, the hand tube and extension tube can be stored easily. easy handling. the compact, ergonomic design and low weight make the extractor particularly easy to transport. touch operation. intuitive touch control panel instead of rotary knobs – for extremely simple operation even when wearing gloves and when dirt builds up. work for longer. the sophisticated container geometry and space-saving flat filter ensure maximum utilisation of the 15 l container volume. extremely versatile. when absorbing water, the levelstop shuts down the drive in good time and the motor remains protected. the wet filter (available as accessory) can be set in place with just a few hand movements.
Specifications:
| Product Type | Vacuum cleaner |
| Cleaner Type | Canister |
| Cleaning Method | Dry, wet |
| Dust Collection | Bag / bagless |
| Filter Type | HEPA |
| Dust Capacity | 3.3 gal |
| Tank Capacity | 4 gal |
| Airflow | 61.3 l/s |
| Suction Pressure | 24 kPa |
| Hose Length | 11.5 ft |
| Hose Diameter | 1.1 in |
| Special Features | Integrated accessory storage |
| Control Type | Touch sensitive |
| Indicators | Dust bag change indicator, motor overheat indicator light |
| Compliant Standards | IPX4, EN 60335-2-69 |
| Sound Pressure Level (SPL) | 70 dB(A) |
| Included Tools | Upholstery brush, crevice nozzle, suction hose |
| Included Accessories | SELFCLEAN filter bag |
| Power Type | Mains |
| Power Consumption | 1200 W |
| Rated Current | 10 A |
| Cord Length | 18 ft |
| Width | 12.6 in |
| Depth | 18.5 in |
| Height | 17.1 in |
| Weight | 24.69 lbs |
Reviews:
This little unit is a solid beast. Does the jobNeal A.
3. Grizzly Industrial G8027 – 1 Hp Dust Collector
Product Details:
A great little workhorse at an incredible price. this is a great machine for sanders router tables shapers and other work. it's also very portable so you can take it to the job site where it can handle the big jobs a regular shop vacuum can't handle. motor: 1 hp 110v single phase motor amp draw: 8a number of 4" intake holes: 1 portable base size: 15" x 25-1/2" height powder coated paint bag filtration: 30 micron bag capacity: 2 cubic feet impeller: 9" balanced steel radial fin air suction capacity: 500 cfm static pressure: 2.76" approx. shipping weight: 67-pound.
Specifications:
| Filter Type | Bag |
| Dust Collector Type | Single Stage |
| Airflow Performance | 500 CFM |
| Max Static Pressure (at 0 CFM) | 2.76 in |
| Main Inlet Size | 4 in |
| Inlet Adpater Included | No |
| Machine Collection Capacity at One Time | 1 |
| Maximum Material Collection Capacity | 2.3 cu. ft |
| Filtration Rating | 2.5 Micron |
| Number of Upper Bags | 1 |
| Number of Lower Bags | 1 |
| Upper Bag Diameter | 14-1/2 in |
| Upper Bag Length | 24 in |
| Lower Bag Diameter | 14-1/2 in |
| Lower Bag Length | 23 in |
| Upper Bag | Fabric |
| Lower Bag | Plastic |
| Impeller Type | Radial Fin |
| Impeller Size | 9 in |
| Impeller Blade Thickness | 3/32 in |
| Base | Steel Metal w/Casters |
| Frame | Formed Steel |
| Frame Formed | Steel |
| Caster High Density | Plastic |
| Paint Type Finish | Powder |
| Overall Depth | 15 in |
| Overall Width | 25-1/2 in |
| Overall Height | 63 in |
Reviews:
This is the first item I have bought from China where every bolt hole lined up and went together great.khuff1954
4. Wen 3403 1,500 Cfm 16-Amp 5-Micron Woodworking Dust Collector With 50-Gallon Collection Bag And Mobile Base
Product Details:
Control the mess and minimize cleanup with the wen 1,500 cfm 5-micron dust collector. this powerful motor provides up to 16 amps of dust collection power, creating 1,500 cubic feet per minute worth of high velocity circulation. attach up to two hoses at a time to either of the 4-inch inlets, allowing for connection to multiple woodworking tools all at one time. combine that with the four swivel casters and mobile base for a versatile and powerful dust extractor that can be easily stored and moved around. the included vertical collection bag holds up to 50 gallons of dust at a time, so you can spend your time woodworking instead of constantly emptying out wood chips. the quick-release clasp makes for simple bag installation while the high speed steel impeller rotates over 3450 times per minute for maximum suction. compatible with the wen 28200 10-foot 4-inch dust hose and the wen 28221 20-foot 4-inch dust hose.
Specifications:
| Horsepower (HP) | 2.5 hp |
| Dust Collector Type | Single Stage |
| Decibel (Sound) Rating | 72 dBA |
| Bag Capacity/Dry Volume (cu. ft.) | 50 cu ft |
| Dust Collection Product Type | Dust Collector |
| Filter Type | Bag |
| Maximum Air Flow Capacity (CFM) | 1500 CFM |
| Power Tool Features | No Additional Features |
| Interior Hose Diameter (In.) | 4 in |
| Product Width (in.) | 22 in |
Reviews:
The cost factor for the power it has gives it the thumbs up The only problem I had was that it arrived from the shipper with a beat up box and bent parts. I bent everything back and the motor was not hurt. I needed the machine right away and went about using it. Works great with dents dings and scratchesbsaxwick
5. Shop Fox W1826 Wall Dust Collector
Product Details:
This wall-mounted dust collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. with 537 cfm capacity, it will handle just about any hungry woodworking machine, and without a complicated duct system, static pressure loss is minimal. a simple wall-mount bracket and locking screw system ensures you'll be safely up and running in no time! the bag filter features a window to gauge dust levels in the bag and a bottom zipper for easy cleaning.
Specifications:
Reviews:
This is a quality built Vac, but has less suction than a 5gal. shop vac. Disappointed.duffy-georg
Hanging the Shop Fox was a breeze, attaching the bag was difficult. I'm not impressed with the suction power and I can see less section as the bag fills. The paint had chips and I can see more paint will be coming off with time. Suction compared to my old shop vacuum is considerably less. I would recommend 1 1/2 horsepower or more even if you have a small workshop like mine…waynemcd1961
6. Rockler Dust Right Dust Right Wall-Mount Dust Collector, 650 Cfm 58860
Product Details:
By pairing an impressive flow rate of 650 cfm with a unique wall-mount design, this collector gobbles up dust at the source, without hogging up floor space. it mounts quickly and easily to the wall with a simple included z-bracket. plus, it's portable the comfortable foam-gripped handle makes transportation and setup a breeze. the motor features a sealed shaft and bearings for quiet, long lasting operation, and the inlet accepts standard 4'' hose. the collector includes a 30-micron bag with a clear window on the side so you can see whether it's full. a zipper in the bottom makes emptying a breeze. features: collects dust while conserving floor space – optional 5-micron bag (#20431, sold separately) offers finer particle retention – optional canister filter (#53522, sold separately) filters down to 1 micron – not recommended for use with plumbed-in, multi-branch dust collection systems.
Reviews:
I never had a dust collector of this kind before. Used shop vacs and dust stoppers. Needed this for my planer and cabinet saw and later for a new band saw. I have it mounted in the corner of my garage, added the one micron filter, a dust seperater (Rockler fittings on a small metal trash can) and about 15 feet of the 4 inch hose. It does pretty good on the table saw when I have to blade guard on. Still get alot of table top dust when I use a sled of any kind. Does great on the band saw when I cut thin stock. Probably gets about 90% of the chips on the Dewalt planer. I can honestly say I do not completely understand static pressure and all that stuff so I have no idea if my set up degrades the abilities of this machine. I got it on sale and compared to the full price of the 1250 cfm model with the bigger filter it was almost half the price. I’ve been using it for about a year and a half. I would be satisfied with keeping it but I am thinking about getting the 1250 cfm when it’s on sale. Not sure if twice the cfm means a twice better job, but I’d like to capture more dust than I am now.Richard
I had been looking for a dust collector for my home built cnc router for a while. I had previously been using a regular but higher end shop vac from one of the box hardware stores. I am really cramped for space so this unit really was appealing to me as you can hang it anywhere. I also really needed the canister filter as I cut some MDF and other materials that leave a super fine dust that will go through a 5 micron filter bag. I finally just got tired of shopping around and decided to just go to Rockler in Arlington, TX and buy it. First of all this dust collector with a 4" hose (that is not included) and canister filter is 1000% absolutely worth the price. It has Plenty of draw and leaves nothing behind after my machine does its thing. The problem is that not all of the material collected just drops into the bag. It packs the pleats of the filter and reduces suction ability. Yes it has a handle that you turn to dislodge particles that are in the filter canister but it only gets loose maybe 5% of whats really packed in there. On top of that these types of mechanisms hurt the filter more than they help as it rubs the same place over and over. After removing the canister twice to clean it (which is a total pain in the a$$) I decided to add to my dust collection system and put a duty deputy in front of the intake of the dust collection system. In my opinion this is THE ONLY way to run this system. The dust deputy catches 99.5% of everything before it even hits the filter. This includes a mixtire of hard and soft woods, mdf and plastics I have cut. I now have a setup that is effortless to service, never clogs, and never ceases to impress me with how well it collects. The attached photos show the setup, the canister and contents of the dust deputy and the contents of what has made it into the bag of the Rockler dust collector after lots and lots of cutting. Only a tiny amount has made it past the dust deputy as you can see.R
I am starting out in woodworking and I thought having a dust collection system in my garage would be a good thing to have. I didn’t want to spend a fortune so thought the Dust Right would be a good starting investment. First, this comes with nothing – no hose, no attachments, no clamps. It’d be nice if Rocker sold these as kits. Once you’re done choosing all the necessities, it adds to the price quite a bit, so I feel the starting price is misleading. Second, this system’s power is underwhelming. I hooked it up to a Dewalt planer and planed two 1×4 12’ boards. Part way through planing the second board, the wood chips started flying out of the machine. I checked the Dust Right and the hose was completely clogged and backed up. It seems to have a hard time pulling the debris from the floor level up to the collector. I had to lift the hose level and shake it to loosen up the debris. It took a good 20 minutes to finally clear the hose. I would have opted for the larger system in retrospect.Rick
7. Wen 1,300 Cfm 14 Amp 50 Gal. 5 Mic Woodworking Dust Collector With Collection Bag And Mobile Base
Product Details:
Control the mess and minimize cleanup with the wen 1,300 cfm 5-micron dust collector. our powerful motor provides up to 14 amp of dust collection power, creating up to 1,300 cu. ft. per minute of high velocity circulation. attach up to 2 hoses at a time to either of the 4 in. inlets, allowing for connections to multiple woodworking tools at once. the included vertical collection bag holds up to 50 gal. of dust at a time, so you can spend your time woodworking instead of constantly emptying out dust. the quick-release clasp makes for simple bag installation, while the 10 in. high-speed steel impeller rotates up to 3450 times per minute for maximum airflow. compatible with the wen 28200 10 ft. 4 in. dust hose and the wen 28221 20 ft. 4 in. dust hose.
Specifications:
| Air Flow (CFM) | 1300 |
| Automatic Shut-Off | No |
| Height (Inches) | 73.2 |
| Self-Cleaning | No |
| Voltage | 120 |
| Wet/Dry | Dry |
| Static Water Lift (Inches) | 0 |
| Weight (lbs.) | 86 |
| OSHA Compliant | Yes |
| Length (Inches) | 33.5 |
| Max Capacity | 50-gallon |
| Hose Diameter | 4-in |
| Width (Inches) | 22 |
| Filter Type | Polyester |
| Amperage | 14 |
| Locking Casters/Wheels | Yes |
8. Jet 717515 Jcdc-1.5 – 1.5hp, 115v Cyclone Dust Collector
Product Details:
Are you ready to get more from your dust collector? the cyclone dust collector collection from jet delivers the efficiency you’ve been waiting for. with a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop’s capabilities to a new level. upgrade to a jet cyclone dust collector and experience the power of efficiency.
Specifications:
| Assembled Depth (in) | 22 in |
| Assembled Height (in) | 67.56 in |
| Assembled Width (in) | 47 in |
| Assembled Weight (lbs) | 132 lbs |
| Item has MSDS (SDS)? | N |
| Packaging Depth | 42.3 IN |
| Packaging Height | 30.3 IN |
| Packaging Width | 23.25 IN |
| Package Weight | 144 |
| Package Weight UOM | LB |
| Length | 22 in |
| Width | 47 in |
| Height | 67.56 in |
| Weight | 132 lbs |
| Horsepower | 1.5 hp |
| Housing Material | Steel |
| Voltage Rating | 115 |
| Color / Finish | See image |
| Decibel Rating | 75 dB |
| Manufacturer Warranty | 5 Year |
Reviews:
Collector works create. Assembly not so easy – some minor errors in the assembly instructions. (Don't look for all the nuts, screws etc in the parts bag up front- some are in different places and will appear as you go along!). Otherwise works well – reasonably quiet and very good suction with a flexible pipe. Really moves chips from a 6 inch jointer!Andrew
Bought the JCDC-1.5 two months ago after much research for a small shop setup. Assembly was pretty straightforward with the included instructions. However, problems started immediately on first use when it tripped the breaker on startup. I'm in a new house with 20 amp circuits in the workshop area. Tried other circuits in the garage with the same result–tripping breaker on startup. Specs say it should be able to run fine on a dedicated 15 amp circuit. Called and paid an electrician to run a new dedicated 20-amp circuit in the garage just for the DC–same result. Called JET tech support, which sent a new electrical box. No instructions included in box, but I managed to install the new box. Same result! Called and paid another electrician to inspect wiring and confirm no issues with panel or wiring, which he did. He notice the DC was drawing 80 amps on startup, which is higher than the startup specs. Called JET tech support again, which sent a new motor. New motor arrived with no instructions for installation or impeller. Managed to remove the old motor but old impeller will not come off despite my best efforts. Now I'm 2 months in and haven't been able to use my brand new DC and the best that JET apparently can do for me is direct me to an authorized service center (expecting me to load this thing up and transport it, when it was delivered on a box truck and pallet) or put me on a waiting list for an onsite visit once the pandemic has passed. Very frustrating!bkwiseman
Im happy with this Jet dust collector. Its well suited for my home shop (800 sq ft, 8 dust collection hookups). Assembly was fairly simple, but could be improved. I was able to assemble it in 45 minutes with no help. Packing was excellent and it arrived undamaged. Air flow at each machine is substantially better than my old Grizzly 1023. Its also much quieter (75 dB) vs 90+ dB for the Grizzly. I can even run two machines at once with sufficient dust collection. Emptying the canister is a breeze.davecag
9. Rikon 60-105 1hp Portable Dust Collector
Product Details:
Specifications:
| Length | 22.5 in |
| Height | 17 in |
| Width | 19.5 in |
Reviews:
I purchased this dust collector in September to match an Oneida Dust Deputy I had received as a gift. I have wall mounted the dust collector to save space in my garage shop. The suction is fantastic through a 20’, 4” hose I added in allowing me to connect to all my tools and reach all areas of the shop for cleaning. The noise is half that of my wet dry vac so that is a huge improvement alone. The wall mounted option is a little odd and doesn’t allow for a real secure fit. I secured a 2’x2’ 3/4 piece of ply to the wall then mounted the supplied hardware to that. I then added additional lag screws to eliminate any possibility of movement. I have not had more than 1 tool hooked up at a time so I am not sure how the suction will decrease. I do not have any dust lined or black gates so I do not know how the suction would react to that either. This has been a great and inexpensive addition to my growing shop. I would recommend for the hobby shop.joe
I purchased this dust collector after narrowing down my choices to this or a dust separator device for my shop vac. Even at roughly double the cost of a good separator kit, so far the Rikon is definitely with it. I'd like more suction, so a separator wouldn't have cut it in my small shop. I like the mobility of this unit, the full size hose, and the large hood. I mentioned wanting more suction… There's enough to get the job done, but placement of the hood is critical to not missing dust flying out of the chute on my portable table saw. This was while cutting mdf boards, real woods don't produce as much dust, so it may be great for that. Besides my table saw, I've used this with a palm sander and it had no problem catching all of the dust from that tool on rough cut cedar. I had the hood about 6-10" from the sander, so I think placement is key with this smaller dust collector.Kyle L
I just unboxed and assembled this portable Rikon #60-105 dust collector. I put on a reducer to hook it up to my table saw. I put my hand over the reducer to feel the suction and then on the hose that comes from my Ridged vacuum #WD0970. It was easy to remove my hand from the hose connected to the Rikon and very hard to remove my hand from my Ridgid. The Ridged seems to have double the suction of this Rikon. I’m very disappointed In this vacuum. What a waste of time and money. I also came in a damaged box and the pickup handle was bent. Poor boxing and packing.TheSawDustWhisperer
10. Dust Right Lathe Dust Collection System
Product Details:
Pen turners and spindle turners will instantly recognize the efficiency and utility of our dust right lathe dust collection system. the centerpiece of the system is our proprietary c-shaped ''dust scoop,'' which wraps around spindle turnings to catch dust right at the source. the boom arm assembly can be easily slid along the bed of your lathe to collect dust wherever you are cutting, and is height adjustable within a 15'' range. it can also be adjusted in and out along the slot in the plate, and pivoted at three points to provide an incredible variety of positioning options. features 9'' long dust scoop surrounds your spindle turnings for efficient, effective dust collection support system is constructed from heavy-duty steel for rigidity and durability included flex form hose fits the dust scoop without a hose clamp, and moves easily as the scoop is repositioned; opposite end fits standard 2-1/2'' o. d. fittings system is compatible with most lathes | dust right lathe dust collection system available at rockler
Specifications:
| Package Dimensions | 16.77 x 6.06 x 5.2 inches |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
Reviews:
I am using this on a Jet 1014, some of the interference problems I've experienced (see below) may be mitigated somewhat with a lathe that has more swing. I currently am using it with a shop vac. It does a good job, getting almost everything AFTER I get past rounding the blank. While rounding the blanks, it only gets about 60%. It does get, at least on the small diameter turnings I've done thus far, all of the sanding dust. Assembly was straightforward and simple. While the instructions weren't perfect, anybody not able to overcome the very slight shortcomings probably shouldn't be operating power equipment anyway. All the parts look to be well made, the paintjob on the metal bits and molding of the plastic bits was excellent. As the 3 stars indicates though, all is not puppies and kittens. There are two aspects to my criticisms. The first concerns the shortcomings of the product as engineered, shortcomings that apply when used as pictured. First, the vertical pole should have a lockwasher in between it and the horizontal bar. The vertical pole will turn some otherwise, and also can loosen up while turning due to vibrations coming from the lathe itself. Second, as noted by another reviewer, there's no means of securing the hose to the shroud. Third, the width of the "nut plate" used to attach the boom arm to the lathe is wider than it should be. These problems all apply, even when using the shroud while turning "long" (relative to the lathe's capacity) spindles, such as turning a pen mounted on a mandrel. The second set of flaws have to do with real design deficiencies. Specifically, it is problematic to use it for "turning between centers" with pens, or turning bottle stoppers, etc. Turning ANYTHING where the distance between the tailstock and the headstock is less than the shroud's length means you may or may not be able to use this. I get interference between the shroud and the tailstock locking handle, between the shroud and the quill locking lever, between the shroud and the tailstock, and sometimes even between the basebar and banjo. So, recommended improvements: Include a lock washer to keep the post from rotating. Make/include a shorter shroud. Redesign the system for attaching the shroud in order to allow flipping the shroud around to the other side. (If the shroud bar could be removed from the sleeve that goes over the post, and the two rearranged, that would likely do the trick.) Add some sort of detent or locking system between the hose and shroud. Narrow the baseplate nut so it's the same width as the mounting bar.John
Upon first installing this I was pretty pleased with what it collected while turning a handle for a pizza cutter, however if you want to turn anything larger than a 1.5 x 1.5 x 6 spindle, you can forget this even being semi-helpful. Pros: -Collects most chips from turning -Collects a LOT of sanding dust (best purpose, in my opinion) Cons: -Only good for handle-sized spindles and smaller projects (even a 2×2 spindle is too large and hits the inside). -Despite decent chip collection, it still leaves behind a good bit of shavings behind. I found myself spending the same amount of time cleaning up my lathe afterwards. -Clunky and cumbersome to move. It's somewhat top-heavy so you may find yourself fighting with it while trying to make adjustments. -Crowds the work area. If you need to do ANYTHING to the piece other than turning, you'll need to loosen, move, and tighten a few knobs to give you enough space, and even then it still felt "in my way" more often than not. -You will need to buy a hose fitting. I'm using the Rockler vacuum hose handle (that's designed to fit 2.5" dust ports) and it is slightly too small for the flex hose that this uses. Overall, it's an okay product that I'm sure is perfect for some people, but personally I wasn't impressed enough to want to keep it, even at the $40 sale price. It's cleaned up, back in the box and about to go back to the store.David
I've got this mounted on a Jet 1236, and will also put it on a Jet 1016 mini-lathe. It collects some of the shavings when I make spindles (I'm working on captive ring baby rattles at the moment) but it excels at collecting sanding dust. It's connected to a 4" dust collector through an adaptor that fits, with difficulty, into the 2" hose that comes with the unit. One BIG benefit is that the vertical metal support rod is quite a bit longer than it needs to be, and can be used to attach other jigs such as one that allows me to sand the inside of the captive rings (I note that I can [and will] now get a chip deflector that attaches to the rod). Downsides: The rod attaches to the horizontal bar with a single flat head screw, and if you rotate the rod for any reason, that comes loose. The fitting that attaches underneath the lathe bed doesn't closely fit the 1236 (it may with the 1016), and that makes it a bit finicky to adjust. The hood itself is kind of small and a lot of chips miss the fitting. But I have a larger hood that I use to collect chips when I'm turning. I may see if I can rig it up to the support for this. None of these problems are even close to being deal breakers. I bought this primarily to collect dust while sanding small projects (like pens and the baby rattles) and for that, I don't think anything else short of a far more powerful vacuum would work better. For what I bought it for, it works perfectly.Greg
11. Jet 710702k Dc-1200vx-Ck1 Dust Collector 2hp 1ph 230v 2-Micron Canister Kit
Product Details:
Description the jet dc-1200vx features the exclusive vortex cone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. the high air velocity (cfm) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. collection bags have a snap ring for fast installation and removal. features eliminates premature filter clogging for sustained performance high air velocity (cfm) design stands up to any competitive specifications includes four casters for maneuverability and total portability industrial controls designed for years of trouble-free use permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty quick-connect collection bags with elastic band for fast, easy installation and removal single-stage design for economical and quiet operation vortex cone improves chip separation and collector bag packing efficiency specifications air flow @ 4" (cfm) 1200 style (type) canister static pressure (wc.) 20 collection bag capacity (cu. ft.) 5-3/10 collection bag length (in.) 29 impeller diameter (in.) 12 sound rating (db.) 80 – 85 impeller material steel motor power (hp) 2 1-hose connection diameter (in.) 6 2-hoses connection diameter (in.) if one of our tools needs service or repair, one of our authorized service centers located throughout the united states can give you quick service.
Specifications:
| Assembled Weight (lbs) | 170 lbs |
| Item has MSDS (SDS)? | N |
| Package Weight | 183 |
| Air Volume | 0 cfm |
| Bag Capacity | 5.3 ft³ |
| Length | 37.5 in |
| Width | 22.5 in |
| Height | 39 in |
| Weight | 170 lbs |
| Air Purifier | No |
| Cord Length | 8 ft |
| Coverage | 0 ft² |
| Current Range (A) | 8 A A |
| Filtration | 98% of 2 micron particles: 86% of 1 micron particles |
| HEPA Filter | No |
| Horsepower | 2 hp |
| Hose Diameter | 6 in |
| Housing Material | Steel |
| Voltage Rating | 230 V |
| Assembly Required | Yes |
| Color / Finish | See Photo |
| Decibel Rating | 80 dB |
| Motor Type | Single Phase |
| Automatic Shut-Off | No |
| Remote Control | No |
| Recommended Safety Equipment | Eyewear |
| Tools or Other Items Required For Assembly | General Purpose Tools |
| Package Contents | Varies by Product |
| Manufacturer Warranty | 5 Year |
Reviews:
Easy to assemble and solid unit, I will be adding some cross braces around the bag to sturdy up the cannister though. The only thing that threw me off was I expected more powerful suction than my shop vac, but it pulls a huge volume. A+ to Jet for the vortex cone, it works great and keeps the canister filter clear of most debris, you can see the sawdust and debris swirling in the bottom of the collection bag. I finally feel like the fine dust problem I have been battling may be going the other way now!Brian
12. Powermatic 1791079k Pm1300tx-Ck Dust Collector, 1.75hp 1ph 115/230v, 2-Micron Canister Kit
Product Details:
The pm1300tx dust collector features the exclusive turbocone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. the canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. a digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. the all-metal duct improves rigidity and air flow. the clear collector bags are large capacity, which means less down-time changing them. four swivel casters and conveniently located handles allow for easy mobility.
Specifications:
| Assembled Weight (lbs) | 154 lbs |
| Item has MSDS (SDS)? | N |
| Package Weight | 165 |
| Air Volume | 0 cfm |
| Bag Capacity | 10 ft³ |
| Length | 45 in |
| Width | 23 in |
| Height | 30 in |
| Weight | 154 lbs |
| Air Purifier | No |
| Cord Length | 8 ft |
| Coverage | 0 ft² |
| Current Range (A) | 15 / 7.5 A A |
| Filtration | 98% of 2 micron particles: 86% of 1 micron particles |
| HEPA Filter | No |
| Horsepower | 1.75 hp |
| Hose Diameter | 6 in |
| Housing Material | Steel |
| Voltage Rating | 115 / 230 V |
| Assembly Required | Yes |
| Color / Finish | See Photo |
| Decibel Rating | 75 dB |
| Motor Type | Single Phase |
| Automatic Shut-Off | Yes |
| Remote Control | No |
| Recommended Safety Equipment | Eyewear |
| Tools or Other Items Required For Assembly | General Purpose Tools |
| Package Contents | Varies by Product |
| Manufacturer Warranty | 5 Year |
Reviews:
Just received and assembled. Went together easily. Seems solid, well built. Rolled into my shop, turned on and blew the dust off of my air compressor, lathe and table saw into the air (machine not connected by hose, just sucking room air) A full handful of fine dust collected in the plastic bag in less than 3 minutes. This thing sucks (and it will clean the air of floating dust)! I will report again when I have it hooked up to tools.Hepaticus
Purchased my first PM1300 dust collector last September and I was so impressed that I purchased another this spring during the Powermatic 15% discount promotion. I had previously owned comparable dust collector models from Penn State and Jet but this unit easily out performs both with ease. Fit and finish are outstanding and it assembles quite easily with a helper. My first unit thoroughly collected dust from my SawStop cabinet saw and Hammer A31 jointer/ planer and the new unit is equally performing on my Supermax drum sander and Jet oscillating spindle sander. The remote control and low decibel noise level make it a pleasure to use. I will probably purchase a third unit at the next Powermatic promotion for my router table and bandsaw area of the woodshop.Craig
13. Grizzly G1163p 1 Hp Light Duty Dust Collector, Polar Bear Series
Product Details:
The g1163p 1 hp light duty dust collector is a point-of-use dust collector, which is designed to capture dust and wood chips from one woodworking machine at a time, such as a table saw, jointer, or planer. it is small in size and has a low profile that make this a perfect point-of-use, dedicated dust collector. the air drawn in by the 10" cast aluminum impeller is filtered through a cloth collection bag that can be removed and emptied when full. the bag filtration is rated at 30 micron, which for a visual comparison, is about half the width of a human hair. this is smaller than the threshold the human eye can see. the g1163p is intended for single machine use. when the unit is not in use, it can be unplugged, unconnected, and rolled away on its convenient casters. a carrying handle was designed to assist move the dust collector to and from where you will be using and storing it. the g1163p manual was written by our u.s. based technical documentation department and is packed with useful information. the complete and easy-to-read manual provides full instructions on how to assemble and maintain your dust collector. features: 30-micron bag filtration 10" cast aluminum impeller steel base with casters for mobility white powder coated paint optional bag upgrade to 3-micron filtration with the h4340 .
Specifications:
| Motor | 1 HP |
| Airflow capacity | 537 CFM |
| Impeller size | 10 in |
| Filter size | 13-1/2 in. x 24 in. bag |
| Intake port(s) | 1 x 4 in |
| Overall height | 19-1/2 in |
| Air suction capacity | 537 CFM |
| Intake hole size | 4" |
| Static pressure | 7.2" |
| Bag size (diameter x depth) | 13-1/2" x 24" |
| Material collection capacity | 11-gallon |
| Overall dimensions | 44 W x 18" L x 19-1/2" H |
Reviews:
14. Wen Dc3474 7.4 Amp Rolling Dust Collector With Induction Motor, 15 Gal. Bag And Optional Wall Mount
Product Details:
Remember when you had the sawdust in your woodshop under control? keep your work area clean and organized with the wen 15-gallon dust collector. this design features a 9-inch impeller and a 7.4-amp induction motor for quieter, maintenance-free operation. the 4-inch dust port inlet lets you connect to your favorite woodworking tools. the four 2-inch swivel casters combined with the onboard carrying handle make for easy storage and transport between jobs. take off the wheels and mount it to your shops wall with the optional built-in wall mount for accessible dust collection whenever you need it.
Specifications:
| Max Capacity | 15-gallon |
| Filter Type | Polyester |
| Hose Diameter | 4-in |
| Weight (lbs.) | 41.1 |
| Width (Inches) | 17.7 |
| Height (Inches) | 20.1 |
| Length (Inches) | 43.3 |
| Locking Casters/Wheels | Yes |
| Self-Cleaning | No |
| Static Water Lift (Inches) | 0 |
| Voltage | 120 |
| Wet/Dry | Dry |
| Air Flow (CFM) | 600 |
| OSHA Compliant | Yes |
| Automatic Shut-Off | No |
| Amperage | 7.4 |
Reviews:
It’s a Christmas gift. Won’t know until the first of the yearMike B.
15. Festool 576760 Dust Extractor Cleantec Ct 36 E Ac Hepa
Product Details:
No more clogged filters – the autoclean (ac) automatic main filter cleaning keeps the filter clean and provides a continuously high suction power. the ct 36 ac is designed to be used with the planex and planex easy drywall sanders. with its huge container capacity of 36 l, the ct 36 ac provides maximum volume and a high degree of flexibility. equipped with swivelling castor wheels and rear wheels for optimum mobility. it also has a locking brake that provides stability on any surface as well as during transport. the flat filter fully integrated in the suction head ensures the full volume is utilized: this means that the gross and net container volumes are virtually identical. the extremely compact high-performance turbine provides the right suction power. a 137 cfm (3900 l/min) volume flow means that nothing remains except clean air. autoclean automatic main filter cleaning system with infinitely adjustable cleaning intervals for consistently high suction power can be individually retrofitted with an additional compressed air or bluetooth module for remote control on the suction hose or automatic start via the bluetooth battery pack. osha table 1 silica dust control solution for the applications outlined as; iii, vii, viii, x, xi, xii (always check your local guidelines to ensure the proper equipment and ppe is being used for the given application)
Specifications:
| Length | 23.62 in |
| Height | 29.13 in |
| Width | 15.75 in |
Reviews:
This is the best vacuum ive usedcoguag-0
16. Jet 708642bk Dc-650 1hp Cfm Dust Collector
Product Details:
Jet model 650 dust collectors hook up to 3 machines at a time for optimum dust cleaning. each 650 series dust collector comes equipped with a quick-install collection bag, single-stage design for economical and quiet operation, 4 casters for maneuverability and total portability, and permanently lubricated, fully enclosed, fan-cooled motors for continuous duty. an optional remote control is radio frequency so there is no need for line of sight to turn the machine on and off.
Specifications:
| Assembled Weight (lbs) | 86 lbs |
| Item has MSDS (SDS)? | N |
| Item is Shipped at this Packaging Level | Y |
| Packaging Depth | 32 IN |
| Packaging Height | 18 IN |
| Packaging Width | 15.5 IN |
| Package Weight | 91 |
| Package Weight UOM | LB |
| Air Volume | 650 cfm |
| Bag Capacity | 2.1 ft³ |
| Length | 32 in |
| Width | 15.5 in |
| Height | 18 in |
| Weight | 86 lbs |
| Air Purifier | No |
| Cord Length | 8 ft |
| Coverage | 0 ft² |
| Current Range (A) | 11 / 5.5 A A |
| Filtration | 30 |
| HEPA Filter | No |
| Horsepower | 1 hp |
| Hose Diameter | 4 in |
| Housing Material | Steel |
| Voltage Rating | 115 / 230 V |
| Assembly Required | Yes |
| Color / Finish | See Photo |
| Decibel Rating | 65 dB |
| Motor Type | Varies |
| Automatic Shut-Off | No |
| Remote Control | No |
| Recommended Safety Equipment | Eyewear |
| Tools or Other Items Required For Assembly | General Purpose Tools |
| Package Contents | Varies by Product |
| Manufacturer Warranty | 5 Year |
Reviews:
Runs great, quiet, and easy to move around. The only thing I’m not found of is it tends to plug at the hose connection. Small twigs or a leaf get in there it’ll plug and I’ll have to remove hose to get it back to working at full strength. Did fine with planer shavings and regualr dust collection.J
I have an unusable product. Parts are missing and and damaged. I have no idea if this is a good buy. I asked for a confirmation that you received my first email and received nothing. There is a part of this product that is missing….the metal rod that holds the dust bag and the dust bag are missing.Esther
This is the second dust collector in my shop. It is set up to minimize dust from my lathe, router and 16/32 belt sander. It is very quick and convenient to select one of these tools for dust collection by simply opening and closing the blast gates connecting these tools. This dust collector fully meetsmy needs and goes a long way in keeping my shop dust free.Dust free Norm
17. Grizzly G0710 – 1 Hp Wall Hanging Dust Collector
Product Details:
These through the professional product specialists at grizzly industrial are made by using long lasting and reliable materials to be able to provide you with a product which will be powerful for a long time. made utilizing some of the best attainable substances and design these from the product specialists at grizzly industrial will last an exceptionally lengthy time. grizzly industrial has been making top quality products for a very long time and the grizzly industrial wall hanging dust collector is their particular means of revealing exactly how much they are concerned.
Specifications:
| Motor | 1 HP |
| Airflow capacity | 537 CFM |
| Impeller size | 10 in |
| Filter size | 13-1/2 in. x 24 in. bag |
| Intake port(s) | 1 x 4 in |
| Overall height | 44 in |
| Dust collector type | Single-stage |
| Approved dust types | Wood |
| Filter type | bag |
| Bag size (diameter x depth) | 13-1/2" x 24" |
| Air suction capacity | 537 CFM |
| Max static pressure (at 0 CFM) | 7.2" |
| Intake hole size | 4" |
| Machine collection capacity | 1 |
| Overall dimensions | 19-1/2" W x 18" D x 44" H |
Reviews:
I purchased this dust collector for a special application where space was at a premium, yet performance was a necessity. This dust collector tucked away in a very tight space, I used 4" pvc pipe rather than flexible hose and it works flawlessly for the application. I am using this to extract dust made on a bench grinder while we are grinding soft sharpening stones, the dust is very fine and normally would be everywhere but with this setup and this machine it is all captured in the bag.wfri3231
Very good unit. Works well. Well built. Too bad the packing for shipping is HORRIBLE. Pieces of broken Styrofoam everywhere. Had to do a major cleanup of the unit with a shop vac. Also several dents in the unit from lousy packaging. Was not worth the hassle of returning BUT very disappointing to have a brand new tool with dents and scratches. I am not the first to have this issue! No excuse grizzly!sailmcman
compact and silent. great productstagedesigners
18. 708659k Jet Dc-1100vx-Ck Dust Collector, 1.5hp 1ph 115/230v, 2-Micron Canister Kit
Product Details:
Dc-1100vx-ck dust collector 1-1/5hp 1ph 115/230v 2-micron canister kit the jet dc-1100vx features the exclusive vortex cone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. the high air velocity (cam) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. collection bags have a snap ring for fast installation and removal. jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.
Specifications:
| Assembled Weight (lbs) | 159 lbs |
| Item has MSDS (SDS)? | N |
| Package Weight | 172 |
| Air Volume | 0 cfm |
| Bag Capacity | 5.3 ft³ |
| Length | 37 in |
| Width | 22.5 in |
| Height | 39 in |
| Weight | 159 lbs |
| Air Purifier | No |
| Cord Length | 8 ft |
| Coverage | 0 ft² |
| Current Range (A) | 11 / 5.5 A A |
| Filtration | 98% of 2 micron particles: 86% of 1 micron particles |
| HEPA Filter | No |
| Horsepower | 1.5 hp |
| Hose Diameter | 6 in |
| Housing Material | Steel |
| Voltage Rating | 115 / 230 V |
| Assembly Required | Yes |
| Color / Finish | See Photo |
| Decibel Rating | 70 dB |
| Motor Type | Single Phase |
| Automatic Shut-Off | No |
| Remote Control | No |
| Recommended Safety Equipment | Eyewear |
| Tools or Other Items Required For Assembly | General Purpose Tools |
| Package Contents | Varies by Product |
| Manufacturer Warranty | 5 Year |
Reviews:
I've only owned this for two days. I also own a new Jet Drill Press. I am definitely impressed with the quality and further impressed with Jet. I will review it again after I use it for a while, but the assembly was a piece of cake. The directions are perfect… not even any spelling mistakes. It only came with lock washers in significant areas. I am hoping this isn't an issue as I would expect a motor like this to have some vibration. Some of the tapped holes were tight but that's expected when painting over. My electric drill handled this easily. And you want it painted over to avoid any corrosion. As a former machinist, it had the correct types of bolts and nuts in the right places. Assembly time was about an hour. If I had done it before, it would be 30 minutes. hmm. maybe I will get a Jet Table saw.Peoria
I purchased the Jet 1.5 HP Dust Collector with Canister Filter just today. My first impressions were not good. First, after picking up the unit at a local retailer I brought it home and began unpacking and assembling. Soon I found the motor assembly was dented meaning a trip back to the retailer to pick up a replacement (fortunately they had another n stock). After resuming assembly I found many of the predrilled and tapped screws would not fit correctly. I managed to secure all screws but for a unit of this price, and expected quality, it was far more complicated and frustrating hen necessary. After several hours of assembly I powered up. Tomorrow will test the suction capabilities. Hoping for the best.Steve
Dust collection, where to begin… I can't here, so what I will say is for what this is supposed to do it does very well. It is a dust collector and not a vacuum, there is a difference, I have both in my shop. The dust collector moves large volumes of air at low differential pressure, the vacuum moves less air at a much higher differential pressure. If you try to use this on handheld tools you will be disappointed, but you can use it on two large machines like a table saw and CNC at the same time, no problem. Also, watch the bag, be sure the sawdust is spinning quickly inside, if not, the vortex can’t work and the dust won’t drop out, it will go up and into the filter. If need be, open another port to bleed in some air to speed it up.Chuck
19. Festool 575280 Dust Extractor Ct Sys
Product Details:
Pre-owned — portable and compact, yet loaded with features such as full unit hepa certification, tool-triggered operation, high-performance suction, and systainer integration. the ct sys is ideal for remodelers and painters who need the utmost in portability, yet without compromise in function. self-contained hose and cord storage, onboard tools, manual and automatic function, shoulder strap, anti-static design, system integration, and low sound (67 dba)), the ct sys is well-equipped and built for professional use. the ct sys system is small in size, big in performance. carries full unit hepa certification.
Specifications:
| Length | 16.14 in |
| Height | 17.13 in |
| Width | 12.21 in |
Reviews:
Works great like every other Festool I have!John F.
I love this DC! I had a fairly expensive Laguna DC for some time. I bought it thinking that I could run 4-inch PVC and solve all of my dust collection needs from a DC located in an out-of-the-way spot in my shop. The problem with my thinking was that, despite the static vacuum produced by the BIG Laguna, Long runs of pipe (we're only talking the area of a two-car garage) reduced the flow so much that the DC capability did not even measure up to my Festool CT Vacuum. I have recently upgraded my shop to a Hammer C3 31 combination machine (I simply love this thing), so my dust collection is concentrated to one of three ports on that same machine, or the port on my bandsaw. So, the current DC strategy is to move the Festool CT-48 tube to the port being used, and the CT SYS portable vacuum supplements the CT48 by collecting overhead dust from the 12" table saw function of the the C3 31. This combination is more effective than the monster Laguna DC – Hose lengths are on the order of 5 feet for the CT48, and 5 feet for the CT SYS. In addition this combination provides me with a powerful ultra-portable vacuum for DC outside of my shop, AND, IT COSTS LESS THAN THE BIG LAGUNA.Wilbur
20. Grizzly G0860- 1-1/2 Hp Portable Cyclone Dust Collector
Product Details:
This compact unit features an impressive 868 cfm and up to 9.7" of static pressure – perfect for handling up to two large machines at once. the 20 gallon collection drum with quick release handle catches large particulate for quick and clean bag changes, and the pleated 1-micron filter captures remaining dust as part of this super efficient two stage separation system. all this, and it features a wireless remote!
Specifications:
| Special Feature | Portable, Compact |
| Form Factor | Cannister |
| Filter Type | HEPA |
| Surface Recommendation | Hard Floor |
| Voltage | 110 Volts |
| Capacity | 20 Gallons |
| Sound Level | 78 dB |
| Controller Type | Push Button |
| Motor Horsepower | 1.5 |
| Control Method | Remote |
| Product Dimensions | 27.5 x 44 x 70 inches |
| Item Package Quantity | 1 |
