pubbelly January recommendations
When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.

10 Best Electric Oil Extractor Pump (2023 Update)

Electric oil extractor pumps are an essential tool for any mechanic or DIY enthusiast. They allow you to easily and quickly drain oil from engines, transmissions and other automotive components. When looking for the best electric oil extractor pump for your needs, there are a few key points you should consider.

First and foremost, you should consider the quality of the pump. Look for a pump that is made of high-quality materials, such as stainless steel or aluminum, so that it is built to last. You should also make sure the pump is easy to use and has all the features you need, such as a self-priming design, a pressure gauge, and a quick-connect fitting.

Next, consider the performance of the pump. Look for one that has a high flow rate, so it can quickly and efficiently drain oil from your engine. Also, make sure the pump has a strong suction capacity so it can draw out oil from hard-to-reach places.

Third, think about the safety features of the pump. Make sure it has a safety valve to prevent the pump from over-pressurizing, and a thermal protection switch to shut off the pump if it gets too hot. Additionally, look for a pump that has a long cord and a power switch, so you can easily turn it off and on.

Finally, consider the cost of the pump. Quality electric oil extractor pumps can range in price from a few hundred dollars to several thousand, so make sure you get the right one for your needs and budget.

In summary, when looking for the best electric oil extractor pump, make sure it is made of high quality materials, has a high flow rate and strong suction capacity, features safety features such as a safety valve and thermal protection switch, and is within your budget. Doing your research and finding the right pump for your needs will ensure you get the most out of it.

10 Best Electric Oil Extractor Pump

1. 12v 100w Oil Pump Extractor – Marine Electric Transfer Suction For Boat/car/motorcycle/atv/rv/truck/motorbike

The PLUMIA 12V 100W Oil Change Pump Extractor is an upgraded device that simplifies oil and diesel fluid changing tasks. It is equipped with two outlet hoses, two inlet hoses, four hose locks, a screwdriver, oil-proof gloves, two battery clips, and a user's manual. This electric oil pump is great for marine, motorbike, ATV, RV, truck, car, and boat applications.

To ensure safety, this product should not be used to draw any flammable liquid or water. Additionally, the engine should be heated to 104°F to 140°F before use to avoid clogging. During operation, users should not leave the pump running continuously to prevent overheating and damage.

The powerful DC 12V 100W motor offers enough power to complete oil pumping tasks quickly and efficiently. It is a great alternative to traditional oil changing methods, reducing the time and effort required to complete the task. The oil flow rate is 0.35L/m, while the diesel flow rate is 1.7L/m.

It is important to note that the PLUMIA 12V 100W Oil Change Pump Extractor is not suitable for gasoline/petrol. Additionally, users should not attempt to connect other extension tubes to the pump as it may affect the suction power.

For any problems encountered with this oil pump, customers can contact customer service, and they will be provided with a satisfactory solution. The PLUMIA 12V 100W Oil Change Pump Extractor is an ideal choice for those looking for a quick and clean oil change solution.

2. 12v 80w Oil Change Pump Extractor With Tube

The PLUMIA Oil Change Pump Extractor is a professional-grade 12V 80W oil transfer pump designed to quickly, easily, and safely change oil in motorcycles, cars, scooters, boats, quad bikes, trucks, ships, forklifts, marine power generators, tractors, lawn mowers, and more. It has a diesel flow of 1.5L/m and an oil flow of 0.3L/m, making it perfect for tackling even the toughest oil changes.

This oil pump is easy to operate, and requires only that you clamp the conductive clip on the motor and open the switch to start it. It has two outlet hoses, two inlet hoses, four hose locks, and two battery clips, and it is important to pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. It is important to note that the suction power of this micro suction pump is limited, and so no other extension tubes should be connected.

Safety is paramount when using this oil pump, and so it should not be used to draw any flammable liquid or water, as this could lead to accidents. Furthermore, the car engine should be heated to 104-140°F (40-60°C) for around 15 minutes before use, to avoid clogging the oil pump due to oil solidification.

Finally, it is important to note that this oil pump is NOT suitable for use with gasoline or petrol, and so any other flammable liquids (fuel, petrol, etc.) should not be used. If any problems arise when using this oil pump, customers should contact customer service immediately.

3. Oil Change Pump Extractor, 12v 60w, Transfer Suction Pump W/ Tubes For Truck, Rv, Boat, Atv

The Amarine Made 12V 60W Oil Change Pump Extractor is an ideal tool for extracting motor oil from vehicles without mess or specialised tools. This pump is designed to extract oil from cars, motorcycles, scooters, quad bikes, trucks, boats, forklifts, generators, tractors, and ride-on mowers. It is easy to install, simply place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery, and press the button.

The Amarine Made 12V 60W Oil Change Pump Extractor features an input voltage of DC 12V, a wattage of 60W, and a current of 5A. It is capable of transferring diesel to cars, trucks, ships, boats, tractors, farm machinery, and plant equipment. The pump has a motor oil flow rate of approximately 0.8-1.0L/min.

The package includes 1x pump, 1x outlet hose, 1x inlet hose, 2x hose clamps, and 2x battery clamps. However, it is important to note that this product is NOT suitable for gasoline/petrol. Additionally, do not use this pump to extract water, gearbox oil, or easy flammable liquids (fuel, petrol, etc).

The Amarine Made 12V 60W Oil Change Pump Extractor is a great tool for transferring motor oil without mess or specialised tools. The easy installation process and included accessories make it a great choice for anyone looking to effectively and easily extract motor oil from their vehicle.

4. 12v Electric Oil Change Pump, Fluid Extractor For Atv, Boat, Truck, Rv, Mower.

This Oil Transfer Pump Extractor is the perfect tool for quickly and cleanly performing oil changes. It is a powerful, 12v 60w battery powered oil extractor pump that is easy to use and able to pump various fluids and oils with ease. All the necessary hoses come included, and it is simple to set up. Just place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, run the small hose down the dipstick tube and turn it on, and press the button. No mess and no specialized tools required.

This oil pump makes oil changes much quicker and cleaner. It can be used to extract old brake fluid, differential fluid, gear oil, and transmission fluids. It is perfect for extracting motor oil from any vehicle, including cars, motorcycles, scooters, marine vessels, quad bikes, trucks, boats, inboard engines, outboard motors, forklifts, home generators, tractors, riding mowers, lawn tractors, and snowmowers. It is also great for siphoning and transferring diesel to cars, trucks, ships, boats, tractors, farm machinery, and plant equipment. There is no need to lay underneath the vehicle to drain the transmission fluid.

This oil extractor pump saves you a lot of time and effort, allowing you to easily draw out the motor oil through the oil dipstick bore. This makes the oil change process much faster and simpler. All you need to do is get the motor warm, turn it off and turn on the oil pump extractor. It will drain the last drop, making the oil change process a breeze. This Oil Transfer Pump Extractor is the perfect tool for quickly and cleanly performing oil changes.

5. Vacuum Fluid Extractor With 2 Power Accessories, 3 Hoses & 6l Oil Barrel.

This Electric Vacuum Fluid Extractor is the perfect tool for changing oil, as it allows you to do so with ease and convenience. It features a 12V power supply, allowing you to quickly and effortlessly pump oil from your vehicle. The material used is thickened PP, making it resistant to high temperatures and corrosion. The 15W motor pumps 1.5 liters of oil per minute, ensuring a fast oil change. In addition, this oil extractor comes with three different diameter tubes that can reach the bottom of the oil pan and make sure no drop of oil is left behind. Finally, it has a 6L reservoir and a lengthened hose for even greater convenience.

This Electric Vacuum Fluid Extractor is perfect for cars, boats, lawn mowers, and trucks. It is lightweight and portable, allowing you to change oil anywhere, anytime. The thickened material ensures that it is durable and long-lasting, while the two power accessories (cigarette lighter and crocodile clip) provide you with multiple power options. The drain switch at the bottom of the bucket makes sure no oil is left behind. With this oil extractor, you can quickly and easily change oil without having to worry about any mess or hassle.

6. 12v Dc Oil Transfer Pump, 60w Fluid Extractor.

This Electric Portable DC 12v Transfer Pump Extractor is the perfect solution for extracting engine oil, fuel and other fluids. Its powerful 60W motor is designed for continuous working and can pump up to 5L per minute. This electric oil change pump kit is easy to use with a simple on/off power switch and tubing of sizes 11mm/8mm/6mm for different environments.

This oil pump extractor is suitable for a variety of applications, from industrial and chemical equipment to shipbuilding, drinks, floor cleaning and vehicle cleaning. It even works for agricultural spraying. To connect this pump to AC power, you will need a power converter.

For optimal performance, it’s important to use the pump when the engine is warm and the oil is warm and has a lower viscosity. This will make pumping easier and faster.

This Electric Portable DC 12v Transfer Pump Extractor is the perfect choice for engine oil extraction and transfer. Its powerful motor and convenient design make it suitable for a variety of applications. It’s also easy to use, so you can get the job done quickly.

7. 12v 60w Oil/diesel Fluid Extractor Pump

The ATPTOOL12V 60W Oil Change Pump Extractor is a great tool for extracting motor oil from your vehicle without needing any specialised tools. This convenient pump features an input voltage of DC 12V, a wattage of 60W, and a current of 5A. Its motor oil (40-60 degrees) flow rate is approximately 1L per minute, making it an ideal equipment for transferring diesel to cars, trucks, ships, boats, tractors, farm machinery, plant equipment, and more.

Installation is simple and can often be done by yourself, as all you need to do is place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery, and press the button. The package includes a pump, an outlet hose, an inlet hose, four hose clamps, and two battery clamps.

Please note that this product is NOT suitable for gasoline/petrol, and should not be used for extracting water, gearbox oil or easy flammable liquids (fuel, petrol etc). With the ATPTOOL12V 60W Oil Change Pump Extractor, you can easily and quickly extract motor oil from your vehicle and transfer diesel to your car, truck, boat, or tractor.

8. 12v Electric Fuel Transfer Pump For Diesel/kerosene Oil

This BLACKHORSE-RACING 12V DC Portable Electric Fuel Transfer Pump is an ideal choice for commercial fuel transfer applications. With a powerful 175W 3600rpm motor, it can transfer up to 45L/min, making for quick and efficient fuel extraction.

The pump is equipped with a self-priming, rotating vane pump, an on/off switch, and an inner bypass valve, ensuring reliable operation every time. It can lift oil up to 32 feet, making it very convenient to transfer diesel from barrels and drums to diesel powered vehicles and equipment.

The package includes 1 x diesel pump and 12V battery connectors for connection with cars, motorcycles, vans, quads and other 12V vehicles. Please note that the pump is suitable for diesel, biodiesel, and kerosene only and not suitable for low flammability fuel such as gasoline, liquefied petroleum gas, alcohol, etc.

The BLACKHORSE-RACING 12V DC Portable Electric Fuel Transfer Pump is an effective and reliable solution for commercial fuel transfer applications. With its powerful motor, convenient use, and safety assurance, you can enjoy an easy and efficient fuel transfer experience.

9. 12v 80w Oil Change Pump Extractor 6.56ft Outlet Pipe For Jet Ski, Truck, Rv, Atv, Boat

The HONGNAL 80w Oil Change Pump Extractor is the perfect solution for quickly and cleanly extracting motor oil from vehicles. With a power of 80W, this pump is capable of changing oil at a rate of 3L/min, making it highly efficient and ideal for a variety of oil extraction tasks.

The 12v extractor pump comes with two extractor tubes, making it easy to perform a top down oil change with a single ON/OFF switch control. With the pump, you can easily remove oil from the engine through the dipstick bore, eliminating the need to lay under the vehicles or machines.

The oil change pump kit is compatible with a wide range of vehicles, including cars, boats, jet skis, motorcycles, scooters, quad bikes, trucks, forklifts, generators, tractors, riding mowers, snowmowers and more. It can be used for siphoning and transferring diesel, oil to other vehicles, boats, tractors, farm machinery, and plant equipment.

The pump is also highly portable, with two hoops to tighten the tubes in order to avoid oil spilling. The 5ft outlet tube and 4ft inlet tube along with the 8.2ft long battery clamps make it possible for use at a large range. It is also easy to use for pumping different fluids and oils; simply place the inlet/outlet hoses in the appropriate positions, connect the power clamps to the car battery and press the button.

The HONGNAL 80w Oil Change Pump Extractor is the perfect tool for quickly and cleanly extracting motor oil from various vehicles, making it easy to ensure your engine runs smoothly.

10. 12v 100w Portable Electric Oil Pump For Car, Motorcycle & Boat Engines

The Vevitts Engine Oil Pump is a portable, electric, self-priming motor oil pump designed for car, motorcycle and boat engine oil transfer and change. Made from high-quality aluminum alloy and plastic pipes, the oil pump is corrosion-resistant, durable, and wear-resistant, making it an ideal tool for oil extraction.

The Vevitts oil pump is lightweight and portable, with a compact size that makes it easy to store and transport. It includes three thick hoses, providing clear visibility of the entire extraction process. Moreover, with its excellent performance and easy installation, the oil pump can be used by one person with no special tools required.

The Vevitts Engine Oil Pump is easy to use. To begin, simply fix the two clips on the battery power supply, connect the two inlet hoses (6mm and 8mm) with the adapter, fix the outlet hose (10mm) on the outlet with the yellow clamp, and turn on the power. No need to warm up the engine oil, just follow the simple steps and the extraction process is underway.

With its high-quality materials and reliable performance, the Vevitts Engine Oil Pump is the perfect tool for oil extraction. It is an essential tool for car, motorcycle, and boat owners who want to change their engine oil with ease. Buy with confidence knowing that each stage of the production process, from raw materials to product factory inspection, is carefully inspected.

Best Electric Oil Extractor Pump FAQs

Do oil pump extractors work?

Yes, oil pump extractors do work. They are designed to extract oil from the engine without having to remove the oil pan. This is done by attaching the extractor to the oil drain plug and then using a vacuum pump to draw the oil out. The oil is then collected in a container for easy disposal. Oil pump extractors are a great way to quickly and easily change the oil in your engine without having to do a full oil change. They are also useful for draining oil from hard-to-reach areas, such as the oil filter. However, it is important to note that oil pump extractors should only be used on engines that are in good condition and that have been properly maintained.

How do you extract oil from a boat engine?

Oil can be extracted from a boat engine by draining the oil from the sump. This is done by removing the oil drain plug located at the bottom of the engine. Once the plug is removed, the oil will begin to drain out. It is important to ensure that the oil is drained into a suitable container and disposed of properly. After the oil has been drained, the oil filter should be removed and replaced with a new one. Finally, the engine should be refilled with the correct type and amount of oil. It is important to follow the manufacturer's instructions when changing the oil in a boat engine.

How do you use an OEM oil extractor pump?

An OEM oil extractor pump is a device used to extract oil from an engine. It is typically used when changing the oil in a vehicle. To use an OEM oil extractor pump, first make sure the engine is off and the oil is cool. Then, attach the pump to the oil drain plug and secure it with a wrench. Next, attach the other end of the pump to a container to collect the oil. Finally, turn on the pump and allow the oil to be extracted. Once the oil has been extracted, turn off the pump and remove it from the engine. Finally, replace the oil filter and refill the engine with new oil.

How much is an oil extractor?

An oil extractor is a tool used to remove oil from an engine. The cost of an oil extractor can vary depending on the type and size of the extractor. Generally, a basic manual oil extractor can cost anywhere from $20 to $50, while a more advanced electric oil extractor can cost up to $200. The cost of an oil extractor also depends on the brand and the features it offers. For example, some oil extractors come with a built-in filter, while others may have a longer hose or a larger capacity. Additionally, some oil extractors are designed for specific types of engines, so it is important to make sure you purchase the right one for your vehicle.

Similar Posts