When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
20 Best Stain For Pine Floors (Jan 2023 Update)
Are you looking for the Best Stain For Pine Floors? If so, you’ve come to the right place.
Choosing the Best Stain For Pine Floors can be difficult as there are so many considerations, such as Baird Brothers Fine Hardwoods, Minwax, Old Masters, OSMO, Ready Seal, Rust-Oleum, Varathane. We have done a lot of research to find the Top 20 Best Stain For Pine Floors available.
The average cost is $22.63. Sold comparable range in price from a low of $6.32 to a high of $88.78.
Based on the research we did, we think Varathane 262012 1 Quart Ipswich Pine Fast Dry Wood Stain is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Stain For Pine Floors (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
Reviewers Noted:
Attractive . Easy to use . Coverage . Odor . Packaging quality
Features:
- No wood conditioner required.
- Great for furniture, trim, floors and more.
- Made with a unique base that provides ultra fast dry time while sealing the wood.
Reviewers Noted:
Easy to use . Attractive . Good coverage . Odor . Durability
Features:
- Cleans up with mineral spirits
- For use on interior wood surfaces
- Great color options to choose from
Reviewers Noted:
Easy to use . Attractive . Odor
Features:
- Spray, roll or brush onto the wood surface
- Protects – moisture can't get under product
- And into the wood – no laps, runs or streaks
$8.48
4.4
Reviewers Noted:
Attractive . Easy to use . No unpleasant odor . Good coverage . Durable
Features:
- Available in 28 beautiful colors.
- Can be used to add beauty to any bare or stripped wood surface.
- It is ideal for staining unfinished wood furniture, cabinets, wood door, trim, molding and hardwood floors.
Reviewers Noted:
Visual appeal . Ease of use
Features:
- About saversystems.
- Enhanced mildew resistance – the same zinc nano-particles that block damaging uv rays are also a natural deterrent to mold and mildew growth.
Reviewers Noted:
Visual appeal
Features:
- Achieves target color in one coat and dries in one hour.
- It is great for furniture, trime, floors and much more.
- Saves time and no wood conditioner is required.
Reviewers Noted:
Easy to use . Odor . Visual appeal
Features:
- Available in assorted colors
- 4 fl. oz. (118.3 ml)
- 25 sq. ft. coverage
$13.48
4.4
Reviewers Noted:
Attractive . Easy to use . Good coverage . No unpleasant odor . Durable
Features:
- Available in 28 beautiful colors.
- Can be used to add beauty to any bare or stripped wood surface.
- It is ideal for staining unfinished wood furniture, cabinets, wood door, trim, molding and hardwood floors.
$9.79
4.9
Reviewers Noted:
Attractive . Ease of use . Coverage
Features:
- Provides richer, more natural color to interior wood furniture, cabinets, doors, trim, floors and paneling.
- Superior soya oil-based formula offers deeper penetration and truer colors.
- Dries to the touch in 1-2 hours and covers up to 35 sq. ft.
$11.00
4.4
Reviewers Noted:
Attractive . Easy to use . No unpleasant odor . Good coverage . Durable
Features:
- Minwax wood finish is an oil-based wood stain that provides long-lasting wood tone color. it penetrates deep into the pores to seal and protect the wood. minwax wood finish is…
Reviewers Noted:
Attractive . Easy to use . Good coverage . No unpleasant odor . Durable
Features:
- Description.
- Specification.
- Deeply penetrating color enhances wood’s beauty in one coat.
Reviewers Noted:
Ease of use
Features:
- This product is non-toxic
- Thick & creamy texture
- Eliminates oil based fumes & mess
Reviewers Noted:
Attractive . Easy to use . Durable . Good coverage . No unpleasant odor
Features:
- For use over bare floors or previously finished floors
- No sanding between coats
- Superior durability
Reviewers Noted:
Ease of use
Features:
- This product is non-toxic
- Thick & creamy texture
- Eliminates oil based fumes & mess
Features:
- Ideal for use on all interior wood projects: furniture, cabinets, doors, trim and paneling
- One-coat coverage, fast-drying oil based formula
- Dries to the touch in just 1 hour and covers up to 70 square feet
Reviewers Noted:
Visual appeal
Features:
- Superior coverage
- Included in mpi category #90
- Stains evenly with controlled penetration
$23.98
4.3
Reviewers Noted:
Easy to use . Attractive . Odor
Features:
- Minwax gel stain is specifically designed to give you full control over the staining process and help you achieve beautiful results.
- Delivers a rich, uniform color on wood and non-wood surfaces, such as metal, veneer, and fiberglass.
- Unique, non-drip gel formula makes application easy for vertical surfaces.
Features:
- Made of a proprietary soya-oil base formula
- Offers superior penetration & grain enhancement
- Translucent pigments for cleaner/truer color
Features:
- Designed for vertical surfaces including doors, window trim and furniture; creates a natural wood look on fiberglass and composite doors
- Formulated with a thicker consistency to prevent drips and runs and provides twice the coverage of traditional oil-based stains
- Dries to touch in 1 hour and covers up to 250 sq. ft. per quart; allow 2 hours between coats
Features:
- Made of a proprietary soya-oil base formula
- Offers superior penetration & grain enhancement
- Translucent pigments for cleaner/truer color
1. Varathane 262012 1 Quart Ipswich Pine Fast Dry Wood Stain
Product Details:
Varathane fast dry wood stains are quick drying; high performance stains that require no wood conditioner and achieve target color in one coat. brings out the beauty of natural woods. nano pigments intensify color clarity and highlight wood grain. varathane fast dry completes projects quickly with a 1 coat formula that dries in 1 hour. superior coverage of 275 sq. ft. per quart on a variety of interior wood surfaces including furniture, cabinets, doors, trim, floors and more.
Specifications:
| Clean Up | Mineral Spirits |
| Coating Material | Urethane Modified Alkyd |
| Color | Ipswich Pine |
| Tintable | No |
| Transparency | Solid |
| Indoor or Outdoor | Indoor |
| VOC Level | 500-550 g/L |
| Application Method | Brush Cloth |
| Time Before Recoating | 1 hr |
| Container Size | 1 qt |
| UV Resistant | No |
| Product Type | Fast Dry Wood Stain |
| Sealer | Yes |
| Each Weight | 2.150 LB |
| Velocity | D |
| Flash Point | 41 deg C |
| Hazardous Material | Yes |
| Height | 4.88 |
| Length | 4.25 |
| Width | 4.25 |
| Product Height (in.) | 4.88 |
| Product Length (in.) | 4.25 |
| Product Width (in.) | 4.25 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 1 |
| Product Weight (lb.) | 2.15 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | No Additional Effects |
| Vehicle Type | Urethane Modified Alkyd |
| Drying Time | 1 hr |
| Odor/Scent | Solvent |
| Flammability Rating | 2 |
| Curing Time | 24 hr |
| Container Type | Can |
| Boiling Point | -18 to 537 deg C |
| Form | Liquid |
| Net Content | 1 qt |
| Pigment Type | Inorganic |
| VOC Content | 548 g/L |
| Hazardous Marine | Hazardous transport required |
| Applicable Materials | Wood |
Reviews:
I went against everything in my brain telling me not to buy a stain online. . .wow did it pay off! This stain is amazing! It absolutely coats in 1 coat and leaves a really rich grey color behind, I used a rag to rub some of it off so it was a bit more rustic, however I love the stain either way! Great product!CraftyMom125
2. 1/2-Pt. Gloss Honey Pine Polyshades Wood Stain, Minwax, 214104444
Product Details:
Stain and poly in 1 step with this highly transparent varnish stain. it highlights the wood's natural grain instead of covering it up. formulated with 100% polyurethane for a tough, long-lasting finish. can be used on numerous finishing projects from new wood surfaces to old, dull fading woodwork, cabinets, and tables. warning: this product contains chemicals known to the state of california to cause cancer and birth defects or other reproductive harm.
Specifications:
| Container Size | 0.5 pt |
| Color | Honey Pine |
| Application Method | Brush |
| Sheen | Gloss |
| Transparency | Semi-Transparent |
| Indoor or Outdoor | Indoor |
| Clean-Up | Mineral Spirits |
| Coating Material | Polyurethane |
| Compatible Surfaces | Wood |
| Each Weight | 0.600 LB |
| Hazardous Material | Yes |
| Sealer | Yes |
| Time Before Recoating | 6 hr |
| Tintable | No |
| UV Resistant | No |
| Velocity | B |
| VOC Level | Low VOC g/L |
| Product Type | Stain and Polyurethane Finish |
| Height | 3.00 |
| Length | 2.80 |
| Width | 2.80 |
| Product Height (in.) | 3 |
| Product Length (in.) | 2.88 |
| Product Width (in.) | 2.88 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Recommended Number of Coats | 2 |
| ECCN | EAR99 |
| Product Weight (lb.) | 0.64 |
| Specific Gravity | 0.9 |
| Applicable Materials | Wood |
| Flash Point | 104 deg F |
| VOC Content | 439 g/L |
| Viscosity | 20.5 cSt |
| Boiling Point | 298.4 deg F |
| Flammability Rating | 2 |
| Hazardous Marine | Hazardous transport required |
| Net Content | 0.5 pt |
| Form | Liquid |
| Drying Time | 6 hr |
| Container Type | Can |
Reviews:
I’m an hobbyist furniture restorer and this stuff is the worst stain I’ve used. On anything larger that a couple square inches it’s next to impossible to get it with an even color coat. The instructions say apply a thin coat in long strokes but the stain is so tacky that you have to either load up the brush or keep applying stain to the brush, not allowing you to get long strokes. Speaking of strokes. This stuff is also near impossible to apply with a brush. On a flat horizontal surface it’s manageable but on anything vertical or with joins it’s awful. I’ve been restoring an old dresser and I followed the instructions to the letter but it looks terrible. Every panel is a different color, getting the strokes out or bubbles out just ends up being an exercise in wiping off the old stain you just put on. This is seriously the worst stuff. If you have a small project. And you’re not too worried about a good finish. Go ahead. If you want a good finish on a large item. Don’t waste your money. It’s terrible.PolyshadesSuck
The paint department staff assured me this product would work for floors. Project was to restore the finish on my oak floors at the home entry. We stripped, sanded, vacuumed and tackey wiped the floors as directed, applied the polyshades and THEN looking for cleanup, came to the end of the paragraph that said NOT RECOMMENDED FOR FLOORS!!!! We expected to apply a 2nd coat, but how many would it take to make it durable enough to be useful? OR, what will work on top of it to make the floor durable enough to last a reasonable time? Product was easy to work with, but didn't realize it was to go on wood that is finished until too late. Hope you can help. Thanks.Shocked JAH
I bought the satin espresso to update a barn door and sofa table in our main living area. The sofa table was a pre finished oak with a light stain and followed the instructions and it came out beautifully. The barn door on the other hand has been a nightmare. Stripped all of the paint off and used pre-stain wood treatment as suggested and still turned out super blotchy. Some places look blood others flat and some satin. Used a quality brush the first time then sanded as recommended and used a staining pad because of the way the first application turned out. Neither did the job and probably going to end up just finding a paint for the door instead. Maybe it was the pine but it looks horrible.dcps650
3. Ready Seal 110 Golden Pine Exterior Wood Stain And Sealer, 1 Gallon
Product Details:
Specifications:
| Clean Up | Mineral Spirits |
| Color | Golden Pine |
| Dry to Touch | 60 min |
| Transparency | Semi-Transparent |
| Indoor or Outdoor | Outdoor |
| VOC Level | 250 g/L |
| Application Method | Brush Roller |
| Time Before Recoating | 1 hr |
| Container Size | 1 Gal |
| UV Resistant | Yes |
| Product Type | Penetrating Wood Stain and Sealer |
| Sealer | Yes |
| Each Weight | 7.000 LB |
| Velocity | N |
| Hazardous Material | No |
| Height | 7.50 |
| Length | 6.50 |
| Width | 6.50 |
| Product Height (in.) | 7.5 |
| Product Length (in.) | 7.5 |
| Product Width (in.) | 6.5 |
| Sheen | Flat/Matte |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior/Exterior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 2 |
| Product Weight (lb.) | 7.4 |
| Vertical or Horizontal Application | Vertical/Horizontal |
| Maximum Optimal Temperature (F) | 125 |
| Surface Location | exterior/interior |
| Tinted Base | Y |
| Drying Time | 60 min |
| Container Type | Can |
| Application | For any exterior wood project |
| Temperature Rating | 0 to 100 deg F |
| Net Content | 1 gal |
| Nomenclature | 110 STAIN/SLR EXT WD GLD PN 1G |
| VOC Content | 100 g/L |
| Warranty | Limited lifetime |
Reviews:
Great stain/sealer. It really is goof proof. I had a new fence installed from pressure treated wood. Waited 6 months for the fence to season/dry out from stacked wood. The wood just soaked this stuff up for penetration into the wood. I anticipate I won't have to do this again for 5 years.anonymous
Purchased a 12 year old cedar sided home out in the country last winter. Lot's of deferred or neglected areas on the acre. Appears the only time home had been stained was at construction. The Ready Seal was applied with both brush for tight areas while a lower cost wagner power sprayer finished up. The finished look is excellent. The weathered cedar siding soaked it up but the finished look is great. I cannot tell the difference where the power sprayed and brushed spots overlap.Crane
Five years ago, my wife and I built our floating deck, and we couldn't wait to stain it. We went with this product and could not be happier. We love it! The application is fast and easy. We re-stain our deck and stairs every spring and it lasts all season. We can't wait to use this for more house features, like shutters, front door, and more!Amber815
4. Minwax Penetrating Stain Wood Finish – Ipswich Pine
Product Details:
Ipswich pine minwax wood finish is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. it applies easily and penetrates deep into the pores of any interior bare or stripped wood surface. it is ideal for staining any unfinished wood surface such as unfinished wood furniture, cabinets, wood door, trim, molding and hardwood floors. apply with a brush, cloth or foam applicator. recoat in 4-6 hours, dry time in 8 hours. cleanup with mineral spirits or paint thinner. covers approximately 35 square feet per half pint. to ensure uniform acceptance of stain color and beautiful results, pretreat the wood with minwax pre stain wood conditioner.
Specifications:
| Clean Up | Mineral Spirits or Paint Thinner |
| Color | Ipswich Pine |
| Tintable | No |
| Transparency | Semi-Transparent |
| Indoor or Outdoor | Indoor |
| VOC Level | Low VOC g/L |
| Application Method | Brush Cloth Foam |
| Coats | 1 |
| Time Before Recoating | 4 hr |
| Container Size | 0.5 pt |
| UV Resistant | No |
| Product Type | Penetrating Wood Stain |
| Sealer | No |
| Each Weight | 0.600 LB |
| Velocity | B |
| Hazardous Material | Yes |
| Height | 3.00 |
| Length | 3.00 |
| Width | 3.00 |
| Product Height (in.) | 3 |
| Product Length (in.) | 2.88 |
| Product Width (in.) | 2.88 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Recommended Number of Coats | 1 |
| ECCN | EAR99 |
| Product Weight (lb.) | 0.6 |
| Drying Time | 8 hr |
| Specific Gravity | 0.95 |
| Applicable Materials | Wood |
| Flash Point | 105.8 deg F |
| VOC Content | 250 g/L |
| Viscosity | 20.5 cSt |
| Boiling Point | 298.4 deg F |
| Flammability Rating | 2 |
| Hazardous Marine | Hazardous transport required |
| Net Content | 0.5 pt |
| Form | Liquid |
| Container Type | Can |
Reviews:
First things first, I love that there are so many color choices for this stain! It took me forever to decide betqeen a fun color or traditional stain, but in the end I went with Buckeye Brown. I also loved that it was low odor, so I could use it inside without irritating my mini pigs sensitive snout. Minwax has a great tutorial on how to use this product on their Youtube channel, and i highly recommend checking it out before starting your project. I unfortunately could not find the Pre Stain conditioner that is recommended, it was sold out at the 2 locations I went to, and I feel like my results would have been a little better if I had used this before the stain. This product IS thicker than I expected, and it is a bit messy, so just prepare your work area accordingly. I tested the stain on an extra piece of wood first so I knew how long to leave it on before wiping, and found that a minute and a half was just about right, and a synthetic pad worked better to wipe that a rag did. Overall the process took longer than I was anticipating, but it turned out pretty well. Seriously do yourself a favor and watch the YouTube video, it really did help me to better prepare my project. I will definitely be purchasing this product in different colors for other projects in the future, cant wait to try the fun colors next!Ginag
Bought this in Carbonite at Lowe's. The color on the top of the can matched the swatch so thought I was good to go. Went home and applied it PER THE INSTRUCTIONS on meticulously prepared wood. Tried it on an inconspicuous first thank God and let me assure you it in NO WAY looks anything like the photos Minwax is peddling online. It's just not a solid stain, at least this shade isn't. To achieve the color I expected per the pic on the website you would need MULTIPLE coats. I actually bought the solid version of this stain because the semi-transparent version was also complete garbage. I thought I just had some bad luck the first go round but no, the water based stains are an absolute waste of money. I'm out $30 if you count the semi-transparent can I bought too, and since Lowe's won't accept returns on tinted paints I came here to go full-on Karen. If I can't get a refund I can at least give a super duper honest review, which will achieve absolutely nothing buy it has made me feel a bit better so there's that.MinwaxKaren
The Minwax Water-Based Stain does a lovely job highlighting the wood grain in the item you are staining. First, before you purchase this product you have to pick the color of the stain that you want. I had 40 choices to choose from, out of this entire job picking the color was the hardest, soooo many colors to choose from. Colors like pink, blue, purple, pink, tea, blue, red, gray, etc. I believe there were 40 colors to choose from. I almost picked orange but saw the Pecan color and knew that was the one. Because it's a water-based stain it doesn't have a horrible smell. The Minwax label says that the stain is 5x thicker for easy application, which I can verify. We waited patiently to see the results after we applied the stain with a sponge brush. The two minutes went by pretty fast and we were able to wipe off the extra. The color is great and the stain really did bring out the wood grain. We did want to try it and wipe it off write away. The color was stunning only it didn't bring out the grain. My suggestion is to wait the two minutes. Seeing the wood grain just gives it a bit more richness to the color.Babshoun
5. Defy Extreme Wood Stain Natural Pine 1-Gallon
Product Details:
Defy extreme wood stain is an extremely durable wood finish that helps protect against the damaging effects of water and fungion exterior wood surfaces. this voc compliant water-based product is fortified with transparent “oxide” based nano particles. over 30 trillion nano particles per square inch provide “extreme” protection for your wood.
Specifications:
| Surface Recommendation | Decks, Furniture, Fence |
| Coating Description | Water-based |
| Item Dimensions LxWxH | 7.5 x 3.25 x 12 inches |
| Finish Type | matte |
| Recommended Uses For Product | exterior-and-interior |
| Opacity | semi-transparent |
| CPSIA Cautionary Statement | No Warning Applicable |
| Paint Type | Water Based |
| Product Dimensions | 7.5 x 3.25 x 12 inches |
| Is Discontinued By Manufacturer | No |
| Finish | matte |
| Item Package Quantity | 1 |
| Included Components | Defy Extreme Wood Stain Natural Pine 1-gallon |
Reviews:
consistency of water, so a little messy going on. Need tarps etc. We followed the wet/wet instructions, a little challenging to keep track of where you've been with the first coat. End result was excellent. Great color of grey. With first rainfall we've had, surface of what we stained repels water. Project was just a month ago so don't know long term effectiveness of this product. So far, would highly recommend.David
This is a fantastic stain.. easy clean up and very penetrating. So glad I found this product and highly recommend.popcorngirl
Easy to brush or spray on. Easy to clean up. Has been on the front section of my privacy fence for a couple of years and still looks new. So assume the claims of preserving for several years are true. It did take two coats to soak in good and get the color grey I wanted. Just bought again for a new fence gate.pbsTX
6. Varathane 269394 1 Quart Weathered Gray Fast Dry Wood Stain
Product Details:
Varathane fast dry wood stains are quick drying; high performance stains that require no wood conditioner and achieve target color in one coat. brings out the beauty of natural woods. nano pigments intensify color clarity and highlight wood grain. varathane fast dry completes projects quickly with a 1 coat formula that dries in 1 hour. superior coverage of 275 sq. ft. per quart on a variety of interior wood surfaces including furniture, cabinets, doors, trim, floors and more.
Specifications:
| Clean Up | Mineral Spirits |
| Coating Material | Urethane Modified Alkyd |
| Color | Weathered Gray |
| Tintable | No |
| Transparency | Solid |
| Indoor or Outdoor | Indoor |
| VOC Level | 500-550 g/L |
| Application Method | Brush Cloth |
| Time Before Recoating | 1 hr |
| Container Size | 1 qt |
| UV Resistant | No |
| Product Type | Fast Dry Wood Stain |
| Sealer | Yes |
| Each Weight | 2.290 LB |
| Velocity | B |
| Flash Point | 40 deg C |
| Hazardous Material | Yes |
| Height | 4.88 |
| Length | 4.25 |
| Width | 4.25 |
| Product Height (in.) | 7.63 |
| Product Length (in.) | 6.63 |
| Product Width (in.) | 6.63 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 1 |
| ECCN | EAR99 |
| Product Weight (lb.) | 2.6 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | No Additional Effects |
| Vehicle Type | Urethane Modified Alkyd |
| Drying Time | 1 hr |
| Odor/Scent | Solvent |
| Sheen | Weathered Gray |
| Flammability Rating | 2 |
| Curing Time | 24 hr |
| Container Type | Can |
| Boiling Point | -18 to 252 deg C |
| Form | Liquid |
| Net Content | 1 qt |
| Pigment Type | Inorganic |
| VOC Content | 542 g/L |
| Hazardous Marine | Hazardous transport required |
| Applicable Materials | Wood |
Reviews:
I'm still on the fence about this product only because I haven't had a chance to use very much of it as my project has been put on hold for the moment but I definitely like the fast dry time and the ability to apply polyurethane within a couple of hours. I'll provide another review and pics when my project is complete.mgegeo-vmh3bz
7. Varathane Less Mess Wood Stain & Applicator 4 Oz. Gray
Product Details:
Varathane less mess wood stain achieves a rich, beautiful finish on indoor wood surfaces without the mess and hassle of traditional wood stains. this 2-in-1 stain and applicator is easy to use. simply press, squeeze and the wood stain will flow directly onto the surface. no additional materials needed.
Specifications:
| Sealer | No |
| UV Resistant | No |
| Base Type | Water-Based |
| Coating Material | Linseed Oil Emulsion |
| Product Type | Wood Stain |
| Color | Gray |
| Time Before Recoating | 2 hr |
| Container Size | 4 oz |
| VOC Level | 250 g/L |
| Indoor or Outdoor | Indoor |
| Coverage Area | 25 sq ft |
| Clean-Up | Soap and Water |
| Application Method | Squeeze |
| Tintable | No |
| Brand Name | Varathane |
Reviews:
very easy to apply! was used to stain some pine boards. didnt need 2 coats but applied 2 coats for darker color.paul
Sadly, I wasted my money on this product, and my review is based on the fact the label is misleading and does not list the ingredients. Assuming the product is amazing when used as a stain alone, I'm only giving two stars because the mislabeled information is a major problem that could result in a ruined project. I am an artist restoring and painting an antique piece of furniture. I chose to use only water based finish for this project as I will be painting an intricate design over the stained wood. When I opened this bottle, I immediately smelled the oil in it. I had to search online for the product specs to find that this product contains linseed oil. This is so disappointing. Had the label contained ingredients, I would not have purchased this. If I wasn't familiar with the smell of oil based paints, I would have painted acrylic over this finish just to find that it would later peel off, resulting in a ruined finish on my project. Even though the product may be cleanable with water, it really needs to state on the label that it has some oil in it.NolaJen
8. Minwax Wood Finish Stain, Early American 230 – 1 Qt Can
Product Details:
Early american minwax wood finish is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. it applies easily and penetrates deep into the pores of any interior bare or stripped wood surface. it is ideal for staining any unfinished wood surface such as unfinished wood furniture, cabinets, wood door, trim, molding and hardwood floors. apply with a brush, cloth or foam applicator. recoat in 4-6 hours, dry time in 8 hours. cleanup with mineral spirits or paint thinner. covers approximately 150 square feet per quart. to ensure uniform acceptance of stain color and beautiful results, pretreat the wood with minwax pre stain wood conditioner.
Specifications:
| Time Before Recoating | 4 hr |
| Coverage Area | 150 sq ft |
| Transparency | Semi-Transparent |
| VOC Level | 250 g/L |
| Color | Early American |
| Base Type | Oil-Based |
| Tintable | No |
| UV Resistant | No |
| Sealer | No |
| Indoor or Outdoor | Indoor |
| Application Method | Brush |
| Container Size | 1 qt |
| Product Type | Penetrating Wood Stain |
| Brand Name | Minwax |
Reviews:
I use the Minwax brand anytime I need an oil based stain. They give consistent results, are easy to apply and soak right in. It’s also very forgiving if liquid stain drips on the project or is applied on unevenly at first, it won’t blotch. When the excess is wiped off at the end, the color is even. A single coat is plenty for a lot of projects but I sometimes apply a second one to darken the final color. The latest color I’ve tried is the honey color. I’ve used it to stain pine wood rounds that will be made into decorative wall signs. The color was true to the reference shown on the can.LinceyP
Every once and a while I find myself trying to apply a stain to a piece while also trying to maintain some semblance of natural color. Minwax has a few offerings I have tried. One is the Natural 209 wood finish; this is an oil stain with a slight red base. No it won't turn the piece red, but it does tip that direction as opposed to yellow. Boiled Linseed Oil is the opposite, providing a natural look with a hint of a yellow base. But when working with Minwax's Tung oil, I have seen the best and most natural results on Maple, Sande, and Birch; both solid wood and plywood applications. If you love the look of your unfinished project, Minwax Tung Oil is the best way to finish without losing the natural charm.Jackoftrades
I am working on a few projects and I need an oil-based stain (Varnish). Therefore, I decided to pick up Minwax Wood Finish Penetrating Stain in Early American 230. By the way, Minwax has over 30 colors to choose from. Since it's an oil-based stain, the wood will have a sharper and deeper look along the wood grain. It is recommended to use the stain on bare wood after sanding and removing all sawdust. I sanded the wood I was going to stain and cleaned off the sawdust. Before using the stain I applied Minwax Pre-Stain to improve the appearance of the wood. I waited 15 minutes to wipe away any excess Pre-Stain left on the wood. Hint: Need a well ventilated area not in direct sunlight. I made sure to mix the stain well and grabbed my paint brush for oil-based stains. Hint: Use a smaller container to hold the stain while you work. When applying the stain, move at a slow but steady pace following the wood grain. Now, we wait 5 to 15 minutes before wiping off the excess stain with an old rag. In two hours the stain will be dry. The longer the stain stays on wood the darker it will get. I was elated to see the pieces of wood I worked on matched exactly as the color on the container. My project has the appearance of natural wood. Also, this product is made in the U.S. with global materials by The Minwax Company. #KeppOnFinishing #FinishedWithMinwax #Minwax #Reesetishas2cents #reesetisha #HonestReviewer #DIYProjects @minwaxusa @reesetishareesetisha
9. Varathane 211791 Premium 1/2 Pt. Ipswich Pine Wood Stain
Product Details:
A soya oil-based premium wood stain that is formulated with a unique base for deeper penetration and premium synthetic pigments for clearer color. this product is ideal for use on all interior wood projects including, furniture, cabinets, doors, trim, floors, and paneling. allow 2 hours dry time between coats. if topcoating, allow stain to dry 8 hours when applying an oil-based finish or 24 hours for a water-based finish. covers approximately 600 sq. ft. per gallon, 150 sq. ft. per quart, 35 sq. ft. or 8" circle per trial size pouch. coverage may vary depending on the applicator and wood species used. clean up with mineral spirits or paint thinner. refer to model no. 211806 thru 241453 for trial size .04 oz. stain pouches for the customer to take home for color testing.
Specifications:
| Clean Up | Mineral Spirits |
| Coating Material | Urethane Modified Alkyd |
| Color | Ipswich Pine |
| Tintable | No |
| Transparency | Solid |
| Indoor or Outdoor | Indoor |
| VOC Level | Less than 550 g/L |
| Application Method | Brush Wipe On |
| Time Before Recoating | 2 hr |
| Container Size | 0.5 pt |
| UV Resistant | No |
| Product Type | Wood Stain |
| Sealer | No |
| Each Weight | 0.610 LB |
| Velocity | C |
| Flash Point | 105 deg. F |
| Hazardous Material | Yes |
| Height | 2.88 |
| Length | 2.88 |
| Width | 2.88 |
| Product Height (in.) | 2.88 |
| Product Length (in.) | 2.88 |
| Product Width (in.) | 2.88 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 2 |
| ECCN | EAR99 |
| Product Weight (lb.) | 0.55 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | Natural Translucent |
Reviews:
This was hard to find where I live. Price and shipping were perfect! A+++teracajean
THIS STAIN WAS UNAVAILABLE LOCALLY5743pat
10. Minwax Ipswich Pine Wood Stain
Product Details:
Minwax wood finish is an oil-based wood stain that provides long-lasting wood tone color. it penetrates deep into the pores to seal and protect the wood. minwax wood finish is available in 16 wood tone colors and can be used to enhance any bare or stripped wood surface. it is ideal for staining furniture cabinets doors trim molding and hardwood floors. minwax wood finish is an oil-based wood stain that provides long-lasting wood tone color. it penetrates deep into the pores to seal and protect the wood. minwax wood finish is available in 16 wood tone colors and can be used to enhance any bare or stripped wood surface. it is ideal for staining furniture cabinets doors trim molding and hardwood floors. minwax wood finish is an oil-based wood stain that provides long-lasting wood tone color. it penetrates deep into the pores to seal and protect the wood.
Specifications:
| product length | 0 |
| product thickness | 1/2in |
| product width | 0 |
| project | Sealers |
Reviews:
First things first, I love that there are so many color choices for this stain! It took me forever to decide betqeen a fun color or traditional stain, but in the end I went with Buckeye Brown. I also loved that it was low odor, so I could use it inside without irritating my mini pigs sensitive snout. Minwax has a great tutorial on how to use this product on their Youtube channel, and i highly recommend checking it out before starting your project. I unfortunately could not find the Pre Stain conditioner that is recommended, it was sold out at the 2 locations I went to, and I feel like my results would have been a little better if I had used this before the stain. This product IS thicker than I expected, and it is a bit messy, so just prepare your work area accordingly. I tested the stain on an extra piece of wood first so I knew how long to leave it on before wiping, and found that a minute and a half was just about right, and a synthetic pad worked better to wipe that a rag did. Overall the process took longer than I was anticipating, but it turned out pretty well. Seriously do yourself a favor and watch the YouTube video, it really did help me to better prepare my project. I will definitely be purchasing this product in different colors for other projects in the future, cant wait to try the fun colors next!Ginag
Bought this in Carbonite at Lowe's. The color on the top of the can matched the swatch so thought I was good to go. Went home and applied it PER THE INSTRUCTIONS on meticulously prepared wood. Tried it on an inconspicuous first thank God and let me assure you it in NO WAY looks anything like the photos Minwax is peddling online. It's just not a solid stain, at least this shade isn't. To achieve the color I expected per the pic on the website you would need MULTIPLE coats. I actually bought the solid version of this stain because the semi-transparent version was also complete garbage. I thought I just had some bad luck the first go round but no, the water based stains are an absolute waste of money. I'm out $30 if you count the semi-transparent can I bought too, and since Lowe's won't accept returns on tinted paints I came here to go full-on Karen. If I can't get a refund I can at least give a super duper honest review, which will achieve absolutely nothing buy it has made me feel a bit better so there's that.MinwaxKaren
The Minwax Water-Based Stain does a lovely job highlighting the wood grain in the item you are staining. First, before you purchase this product you have to pick the color of the stain that you want. I had 40 choices to choose from, out of this entire job picking the color was the hardest, soooo many colors to choose from. Colors like pink, blue, purple, pink, tea, blue, red, gray, etc. I believe there were 40 colors to choose from. I almost picked orange but saw the Pecan color and knew that was the one. Because it's a water-based stain it doesn't have a horrible smell. The Minwax label says that the stain is 5x thicker for easy application, which I can verify. We waited patiently to see the results after we applied the stain with a sponge brush. The two minutes went by pretty fast and we were able to wipe off the extra. The color is great and the stain really did bring out the wood grain. We did want to try it and wipe it off write away. The color was stunning only it didn't bring out the grain. My suggestion is to wait the two minutes. Seeing the wood grain just gives it a bit more richness to the color.Babshoun
11. Minwax Wood Finish, English Chestnut – 1 Qt Can
Product Details:
Specifications:
| Clean Up | Mineral Spirits or Paint Thinner |
| Transparency | Semi-Transparent |
| Color | English Chestnut |
| Base Type | Oil-Based |
| UV Resistant | No |
| Tintable | No |
| Sealer | No |
| Indoor or Outdoor | Indoor |
| Container Size | 1 qt |
| Coverage Area | 150 sq ft |
| Product Type | Penetrating Wood Stain |
| Time Before Recoating | 4 hr |
| Application Method | Brush/Cloth |
| Brand Name | Minwax |
Reviews:
I use the Minwax brand anytime I need an oil based stain. They give consistent results, are easy to apply and soak right in. It’s also very forgiving if liquid stain drips on the project or is applied on unevenly at first, it won’t blotch. When the excess is wiped off at the end, the color is even. A single coat is plenty for a lot of projects but I sometimes apply a second one to darken the final color. The latest color I’ve tried is the honey color. I’ve used it to stain pine wood rounds that will be made into decorative wall signs. The color was true to the reference shown on the can.LinceyP
Every once and a while I find myself trying to apply a stain to a piece while also trying to maintain some semblance of natural color. Minwax has a few offerings I have tried. One is the Natural 209 wood finish; this is an oil stain with a slight red base. No it won't turn the piece red, but it does tip that direction as opposed to yellow. Boiled Linseed Oil is the opposite, providing a natural look with a hint of a yellow base. But when working with Minwax's Tung oil, I have seen the best and most natural results on Maple, Sande, and Birch; both solid wood and plywood applications. If you love the look of your unfinished project, Minwax Tung Oil is the best way to finish without losing the natural charm.Jackoftrades
I am working on a few projects and I need an oil-based stain (Varnish). Therefore, I decided to pick up Minwax Wood Finish Penetrating Stain in Early American 230. By the way, Minwax has over 30 colors to choose from. Since it's an oil-based stain, the wood will have a sharper and deeper look along the wood grain. It is recommended to use the stain on bare wood after sanding and removing all sawdust. I sanded the wood I was going to stain and cleaned off the sawdust. Before using the stain I applied Minwax Pre-Stain to improve the appearance of the wood. I waited 15 minutes to wipe away any excess Pre-Stain left on the wood. Hint: Need a well ventilated area not in direct sunlight. I made sure to mix the stain well and grabbed my paint brush for oil-based stains. Hint: Use a smaller container to hold the stain while you work. When applying the stain, move at a slow but steady pace following the wood grain. Now, we wait 5 to 15 minutes before wiping off the excess stain with an old rag. In two hours the stain will be dry. The longer the stain stays on wood the darker it will get. I was elated to see the pieces of wood I worked on matched exactly as the color on the container. My project has the appearance of natural wood. Also, this product is made in the U.S. with global materials by The Minwax Company. #KeppOnFinishing #FinishedWithMinwax #Minwax #Reesetishas2cents #reesetisha #HonestReviewer #DIYProjects @minwaxusa @reesetishareesetisha
12. Walnut Gel Stain, 2oz
Product Details:
About americana gel stain -americana gel stains are perfect for producing antiqued or stained finishes on wood or other hard surfaces. their thick and creamy consistency makes it easy to work without making a mess, and the water-based formula eliminates the fumes of typical oil-based products. this product works well on wood, ceramic bisque, paper mache, resins, and plastercraft. to use for staining, apply americana gel stain to surface and then wipe it down with a soft, lint-free cloth. for additional highlights, allow one hour drying time and then use a soft, damp cloth to add further stain. when using on wood, you can mix 25% multi-purpose sealer with 75% americana gel stain to seal and stain at the same time. for antiquing apply a thin coat of americana gel stain and wipe off with a soft cloth before the stain can dry. leave more of the stain in cracks and crevices.
Specifications:
Reviews:
Was sent a badly leaking bottle. Leaked so bad the top was flooded with the brown stain. Unable to return due to postal restrictions. Who would send a leaking bottle to a paying customer?—an irresponsible seller, that's who. Will not buy from seller again and will look elsewhere. Buyer beware.aretha
The gel stain worked perfectly on my plastic picture frame.Lois
13. Minwax 672020000 Complete 1-Step Floor Finish, 1 Gallon, Acorn Brown
Product Details:
Complete 1-step floor finish allows you to change the color of your hardwood floors without sanding down to bare wood. also, no need to sand between coats. you can finish your floor project in one day. each coat of this product s advanced polyurethane formula adds beautiful color and delivers outstanding protection against foot traffic.
Specifications:
| Surface Recommendation | Floor |
| Item Dimensions LxWxH | 6.75 x 6.75 x 7.93 inches |
| Finish Type | gloss |
| Style | Gloss |
| CPSIA Cautionary Statement | No Warning Applicable |
| Product Dimensions | 6.75 x 6.75 x 7.93 inches |
| Country of Origin | USA |
| Finish | gloss |
| Item Package Quantity | 1 |
| Included Components | floor |
Reviews:
Applied this with an applicator for floors, tried using a deck pad in the beginning but failed miserably. Floor applicator pad was much more forgiving. For a novice I would recommend using this product with knee pads and avoid using a pole. So much better control! Stained pretty dark, but I did three coats because deck pad screwed up my first attempt. Directions recommend two coats. Probably best to apply light coats to get the desired darkness. This one dries fast and is tacky within minutes. Good for smaller jobs.Fawn H
I bought this in Brandywine gloss on Amazon. I have engineered hardwood flooring (yes I know) but anyway I wanted to go darker since I had mix matched flooring by combining old with new plus they were pretty beat up. I scuffed sanded with 150 grit and applied this product with a synthetic pad. Not going to lie its a bit of a learning curb and I have a couple of darker areas from fixing bubbles but I love how my floors came out! I definitely would suggest additional coats of a tuff clear poly as I don't think the wood absorbs this like a regular stain and judging by other reviews. I used Minwax oil modified water based an addition and I could see the difference. Make sure you wait a lot longer then 2-3 hours in between coats and remember the more coats the darker you get I wouldn't do more then 2 coats I learned the hard way!!!!Wendy W
This product saves you an unbelievable amount of time. It's great for DIY beginners. Read the instructions carefully. You will need to prep your floors first by sanding them. You have to let the floors dry for about 2 hours but try not to let them dry a full 24 hours; otherwise you will need to sand again. The shade Gunstock wasn't an exact match but it wasn't too different from my actual floor color.PeachyJ
14. Wood Gel Stain 2oz – Maple
Product Details:
About americana gel stain -americana gel stains are perfect for producing antiqued or stained finishes on wood or other hard surfaces. their thick and creamy consistency makes it easy to work without making a mess, and the water-based formula eliminates the fumes of typical oil-based products. this product works well on wood, ceramic bisque, paper mache, resins, and plastercraft. to use for staining, apply americana gel stain to surface and then wipe it down with a soft, lint-free cloth. for additional highlights, allow one hour drying time and then use a soft, damp cloth to add further stain. when using on wood, you can mix 25% multi-purpose sealer with 75% americana gel stain to seal and stain at the same time. for antiquing apply a thin coat of americana gel stain and wipe off with a soft cloth before the stain can dry. leave more of the stain in cracks and crevices.
Specifications:
Reviews:
This product renewed my antique maple furniture – there was so much damage to the wood i thought i would have to have it professionally refinished. This product REALLY works and saved me a lot of money and it was so simple to use and not messy like some stains. A little goes a long way. I will be purchasing additional stain colors for all my wood furniture!catherine
I needed a special effect on a guitar repair and it worked wonders its water based n that most importantbutchd186
15. Varathane 262030 Premium Fast Dry Interior Wood Stain
Product Details:
Varathane fast dry wood stains are quick drying; high performance stains that require no wood conditioner and achieve target color in one coat. brings out the beauty of natural woods. nano pigments intensify color clarity and highlight wood grain. varathane fast dry completes projects quickly with a 1 coat formula that dries in 1 hour. superior coverage of 275 sq. ft. per quart on a variety of interior wood surfaces including furniture, cabinets, doors, trim, floors and more.
Specifications:
| Clean Up | Mineral Spirits |
| Coating Material | Urethane Modified Alkyd |
| Color | Sun Bleached |
| Tintable | No |
| Transparency | Solid |
| Indoor or Outdoor | Indoor |
| VOC Level | 500-550 g/L |
| Application Method | Brush Cloth |
| Time Before Recoating | 1 hr |
| Container Size | 0.5 pt |
| UV Resistant | No |
| Product Type | Fast Dry Wood Stain |
| Sealer | Yes |
| Each Weight | 0.700 LB |
| Velocity | C |
| Flash Point | 41 deg C |
| Hazardous Material | Yes |
| Height | 2.88 |
| Length | 2.88 |
| Width | 2.88 |
| Product Height (in.) | 2.87 |
| Product Length (in.) | 2.87 |
| Product Width (in.) | 2.87 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 1 |
| ECCN | EAR99 |
| Product Weight (lb.) | 0.75 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | No Additional Effects |
| Vehicle Type | Urethane Modified Alkyd |
| Drying Time | 1 hr |
| Odor/Scent | Solvent |
| Flammability Rating | 2 |
| Curing Time | 24 hr |
| Container Type | Can |
| Boiling Point | -18 to 252 deg C |
| Form | Liquid |
| Net Content | 0.5 pt |
| Pigment Type | Inorganic |
| VOC Content | 515 g/L |
| Hazardous Marine | Hazardous transport required |
| Applicable Materials | Wood |
Reviews:
it did what i wanted it to.slowc-63
Perfect for the project I was needing it for!therealbellapatriot
16. Zar – Interior Wood Stain – 110 Salem Maple – 1 Quart
Product Details:
Specifications:
| Indoor or Outdoor | Indoor |
| Transparency | Semi-Transparent |
| Color | Salem Maple |
| Base Type | Oil-Based |
| Coating Material | Oil |
| Product Type | Wood Stain |
| Container Size | 1 qt. |
| UV Resistant | No |
| Coverage Area | 3 |
| Application Method | Wipe |
| Time Before Recoating | 24 hr. |
| Sealer | No |
| Tintable | Yes |
| Brand Name | ZAR |
Reviews:
17. Minwax Wood Gel Stain, Cherrywood – 1 Qt
Product Details:
Cherry wood minwax gel stain is specifically designed to give you full control over the staining process and help you achieve beautiful results. its unique non drip gelled consistency formula makes application easy and the ideal choice for vertical surfaces. delivers uniform color evenly on wood and non wood surfaces such as metal, veneer, and fiberglass. because it is thick-bodied, it stays more toward the surface of the wood, allowing greater color control during application. gel stain can be used as an interior stain. for exterior surfaces, it must be top coated with an exterior clear protective finish. apply with a brush, cloth or foam applicator on woodwork, furniture, doors, molding, trim, cabinets and accessories. recoat in 8-10 hours, dry time in 24 hours. cleanup with mineral spirits. to help ensure uniform acceptance of stain color and beautiful results, pretreat the wood with minwax pre stain wood conditioner. covers 200 square feet per quart.
Specifications:
| Color | Cherrywood |
| Tintable | No |
| Transparency | Semi-Transparent |
| Clean-Up | Mineral Spirits |
| Indoor or Outdoor | Indoor and Outdoor |
| Application Method | Brush Cloth Foam |
| Time Before Recoating | 10 hr |
| Container Size | 1 qt |
| Compatible Surfaces | Wood Fiberglass Metal |
| UV Resistant | No |
| Product Type | Gel Stain |
| Sealer | No |
| Each Weight | 2.225 LB |
| Velocity | C |
| Hazardous Material | Yes |
| Drying Time | 24 hr |
| Specific Gravity | 0.88 |
| Applicable Materials | Fiberglass Metal Veneer Wood |
| Flash Point | 102.2 deg F |
| VOC Content | 254 g/L |
| Viscosity | 20.5 cSt |
| Boiling Point | 298.4 deg F |
| Flammability Rating | 2 |
| Hazardous Marine | Hazardous transport required |
| Application | For interior applications |
| Net Content | 1 qt |
| Form | Gel Liquid |
Reviews:
I do a lot of woodworking projects and love building furniture. I tend to use Minwax stains and varnishes to finish all of my projects. However, this is the first time I've had a chance to use a gel stain. I used this stain to finish a side table I've been working on and I opted for the Cherrywood color. I'm very pleased at how easy it was to apply – I just used a cloth to wipe it on. The wood took it up quite easily and I didn't get any blotching. I like that I didn't get any runs, so the color actually turned out to be more uniform than I usually get with a cloth application. The color is nice and rich and cleanup was very easy using a bit of olive oil and soap (or just use mineral spirits if you've got it handy). Overall, I'm very pleased with his gel stain from Minwax!KyleH
Minwax® Gel Stain is great! They have a wonderful tint selection. It is nice and thick so you can do just one coat. Goes on easily and evenly. Dries fairly quickly. The end result is great, very pretty and eye catching. Looks shiny and natural. Being gel, I am confident it will last longer too! Very happy with this product.Lorelei555
I used this on Poplar wood. The stain was of course easy to apply with a brush. It took well to the wood. I did not use a wood conditioner. Another coat would probably make it a deeper, richer red/brown. I liked that this stain didn't need a second coat or sanding between coats. I could see the color immediately and it was the said color right from the start. No waiting around to see how dark it would dry. I would suggest putting on a wood conditioner before the stain. As you can see in the photos, part of the wood stained darker than expected. A wood conditioner would help tone this down and look more uniform. There is a slight sheen after applied. The directions recommend adding a protective coat to it. A flat protective polyurethane would make a nice finished, look.Icewoz
18. Varathane 211710h Premium 1 Qt Golden Pecan Wood Stain
Product Details:
A soya oil-based premium wood stain that is formulated with a unique base for deeper penetration and premium synthetic pigments for clearer color. this product is ideal for use on all interior wood projects including, furniture, cabinets, doors, trim, floors, and paneling. allow 2 hours dry time between coats. if topcoating, allow stain to dry 8 hours when applying an oil-based finish or 24 hours for a water-based finish. covers approximately 600 sq. ft. per gallon, 150 sq. ft. per quart, 35 sq. ft. or 8" circle per trial size pouch. coverage may vary depending on the applicator and wood species used. clean up with mineral spirits or paint thinner. refer to model no. 211806 thru 241453 for trial size .04 oz. stain pouches for the customer to take home for color testing. golden pecan, quart age group: adult.
Specifications:
| Container Size | 1 qt |
| Color | Golden Pecan |
| Application Method | Brush Cloth |
| Clean Up | Mineral Spirits |
| Transparency | Solid |
| Flash Point | 38 deg C |
| Indoor or Outdoor | Indoor |
| Coating Material | Urethane Modified Alkyd |
| Each Weight | 2.200 LB |
| Hazardous Material | Yes |
| Sealer | No |
| Time Before Recoating | 2 hr |
| Tintable | No |
| UV Resistant | No |
| Velocity | C |
| VOC Level | Less than 550 g/L |
| Product Type | Wood Stain |
| Height | 4.75 |
| Length | 4.25 |
| Width | 4.25 |
| Product Height (in.) | 4.88 |
| Product Length (in.) | 4.25 |
| Product Width (in.) | 4.25 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 1 |
| ECCN | EAR99 |
| Product Weight (lb.) | 2.1 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | No Additional Effects |
| Net Content | 1 qt |
| Vehicle Type | Urethane Modified Alkyd |
| Form | Liquid |
| Drying Time | 1 to 2 hr |
| Applicable Materials | Wood |
| Odor/Scent | Solvent |
| VOC Content | 543 g/L |
| Boiling Point | 100 to 204 deg C |
| Pigment Type | Inorganic |
| Flammability Rating | 2 |
| Hazardous Marine | Hazardous transport required |
| Container Type | Can |
19. Varathane 358305 Premium Gel Stain, Quart, Ipswich Pine
Product Details:
Specifications:
| Height | 4.88 |
| Length | 4.25 |
| Width | 4.25 |
| Brand | Varathane |
| Application Method | Brush Lint-Free Cloth |
| Product Height (in.) | 4.88 |
| Product Length (in.) | 4.25 |
| Product Width (in.) | 4.25 |
| Substrate/Surface Use Type | Wood Metal Fiberglass |
| Transparency | Solid |
| Hazardous Material | Yes |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 1 |
| Product Weight (lb.) | 1 |
| Time before Recoating (hr) | 2 |
| Vertical or Horizontal Application | Vertical |
| Wood Effects | No Additional Effects |
| Drying Time | 1 hr |
| Specific Gravity | 0.891 |
| Applicable Materials | Wood |
| Flash Point | 48 deg C |
| Odor/Scent | Solvent-Like |
| VOC Content | 507 to 526 g/L |
| Boiling Point | 100 to 537 deg C |
| Pigment Type | Silica |
| Temperature Rating | 50 to 90 deg F |
| Cleanup Type | Mineral Spirits Paint Thinner |
| Flammability Rating | 2 |
| Hazardous Marine | Hazardous transport required |
| Application | For floors decks or siding |
| Color | Ipswich Pine |
| Net Content | 1 qt |
| Form | Gel Paste |
20. Varathane 211794 Premium Wood Stain, Half Pint, Provincial
Product Details:
Varathane 1/2-pint premium interior wood stain uses translucent pigments with excellent color suspension to achieve a true, clean provincial color in just 2 – 3 coats. the stain penetrates deeply into the wood for even coverage and long-lasting color. anti-settling ingredients mean the stain requires little stirring during use.
Specifications:
| Clean Up | Mineral Spirits |
| Coating Material | Urethane Modified Alkyd |
| Color | Provincial |
| Tintable | No |
| Transparency | Solid |
| Indoor or Outdoor | Indoor |
| VOC Level | Less than 550 g/L |
| Application Method | Brush Wipe On |
| Time Before Recoating | 2 hr |
| Container Size | 0.5 pt |
| UV Resistant | No |
| Product Type | Wood Stain |
| Sealer | No |
| Each Weight | 0.610 LB |
| Velocity | C |
| Flash Point | 105 deg. F |
| Hazardous Material | Yes |
| Height | 2.88 |
| Length | 2.88 |
| Width | 2.88 |
| Product Height (in.) | 2.88 |
| Product Length (in.) | 2.88 |
| Product Width (in.) | 2.88 |
| Substrate/Surface Use Type | Wood |
| Interior or Exterior | Interior |
| Paint Base Material | Oil |
| Recommended Number of Coats | 2 |
| ECCN | EAR99 |
| Product Weight (lb.) | 0.55 |
| Vertical or Horizontal Application | Horizontal |
| Wood Effects | Natural Translucent |
