Are you an RV owner looking to transport bikes during your travels? Choosing the right bike rack is crucial for protecting your bikes and providing easy access on the road. When shopping for an RV bike rack, there are a few key factors to consider before making a purchase.
First, examine the weight limits and dimensions of the rack to ensure it can accommodate the type and number of bikes you plan to carry. Will you need to transport lightweight bikes or heavier electric bikes? How many bikes do you need the rack to hold? Measure your RV ladder, bumper, or receiver hitch to find a rack that fits the space.
You’ll also want to think about ease of use. Can the bikes be loaded and unloaded without too much heavy lifting or awkward maneuvering? Look for racks with thoughtful design features like anti-sway cradles, built-in locks, and foldable or tilting mechanisms for bike access.
Lastly, consider the durability of the materials and construction. Bike racks take a lot of stress from road vibrations, weather, and more. Carefully inspect the welding, thickness of tubing or steel, and connection points of any rack you’re evaluating.
Taking time to think through these factors will help you select a bike rack that truly meets your RV and biking needs. The right rack gets your bikes to your adventure destinations while keeping them safe and secure along the way.
20 Best Bike Racks For Rv (20 Sellers)
Product Image |
Product Name |
Features |
Check Price |
|
|
-
- Rv approved: the traveler xc2 works well with various sizes of trailers & campers.
- Easy to assemble: only takes a few minutes to assemble following the instructions.
- Sturdy: the light but sturdy design keeps your bikes in place, even on the those long journeys!
|
|
|
|
-
- Heavy duty steel construction
- Built for 4 -4.5" continuous welded steel bumper
- Transports up to 4 bikes
|
|
|
|
-
- Wide eye opening for softball
- Low-profile flat beam construction maximizes sightlines, protects, and minimizes weight
- Removable liner system
|
|
|
-
-
-
4.0
-
Reviewers Noted:
Minimal distortion . Easy to use . Durability . Weight . Pet approval
|
-
- Heavy-duty steel construction with powder-coat finish
- Quick and easy loading with adjustable clamps and wheel holders with straps
- Will fit most styles of bike with tires up to 5" wide
|
|
|
|
-
- The new 2021 rv rider carries 2 e-bikes (up to 80 lbs. each) on the back of an rv motorhome, a 5th wheel or a flat towed vehicle. special features…
|
|
|
-
-
-
4.5
-
Reviewers Noted:
Ease of setup
|
-
- Carry bike pro m for vertical spacing between 80cm and 150cm use
- 1 x rail quick 128 and 1 x bike block pro 2 4th bike upgrade kit
- As above plus 1 x rail quick 128 and bike block pro 4 downloads
|
|
|
|
-
- Integrated bike lock
- Holds wheelbases up to 47 and tires as large as 3 width
- Spacing increased between bikes to 14
|
|
|
|
-
- Transports 1-4 bicycles on an rv or camper trailer bumper (max 60kg. capacity)
- Designed for 10cm – 11cm square rv bumpers, instals with a 16cm and 20cm long bolts around the rv bumper
- 3cm w tyre wells with 16cm spacing between wells, 11cm from bolt to first well
|
|
|
|
-
- The steel construction.
- The transfer v2 is more solid than ever.
- Flatlock hitch cam for enhanced stability in tow.
|
|
|
|
-
- Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray.
- Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting.
- Improved mounting hardware fits most factory cross bar profiles.
|
|
|
|
-
- Fits ladders with 1" round tubing
- All hardware included
- Lightweight aluminum design
|
|
|
|
-
- Form fit cradles securely hold your bikes
- Easily installs to fit standard rv ladders
- Bonus straps provide added security
|
|
|
|
-
- (open-box) hyperax hitch mounted bike rack carrier for rv trailer
- Designed for camper rv trailer
- 140lb max load (70lb per side)
|
|
|
|
-
- Transports 1-2 bicycles on an rv or camper trailer bumper (max 60 lb. capacity)
- Designed for 4" to 4.5" square rv bumpers, installs with (2) 6.5" u-bolts around the rv bumper
- 2"w tire wells with 6.25" spacing between wells, 4" from bolt to first well
|
|
|
|
-
- Two-bike capacity, up to 60lbs each
- No-tool install
- Fits wheelbases up to 48”
|
|
|
|
-
- Ratcheting wheel strap quickly secures back wheel to tray.
- Maximum bike weight up to 20 kg.
- No bike frame contact is made as the hook securely grabs the front wheel suitable for bikes with carbon frames.
|
|
|
|
-
- Bike carrier rack – the guide gear hitch cargo carrier is perfect for trucks. made to haul 2 fat tire bikes, featuring adjustable wheel holders.
- Durable – the bicycle rack is made from durable steel with a powder-coated finish that’s rust and corrosion-resistant for long-term outdoor use.
- Adjustable – the cycling rack features a 200 lb. weight capacity and adjustable wheel holders. will fit any type of bike.
|
|
|
|
-
- Combine with a power tower for easy transportation on your rv trailer’s a-frame
- Combine with a bump-it for easy transportation with most car or rv hitches
- Combine with a bike base for easy transportation on various trailer frames
|
|
|
|
-
- New frame grip arms have improved soft frame-friendly coating to protect bike's finish
- Center arm folds down to allow access to the rear of vehicle without removing the rack
- Built-in anti wobble hitch device
|
|
|
|
-
- 1 piece
- Highly effective
- Easy to use
|
|
Features:
- Rv approved: the traveler xc2 works well with various sizes of trailers & campers.
- Easy to assemble: only takes a few minutes to assemble following the instructions.
- Sturdy: the light but sturdy design keeps your bikes in place, even on the those long journeys!
Features:
- Heavy duty steel construction
- Built for 4 -4.5" continuous welded steel bumper
- Transports up to 4 bikes
Features:
- Wide eye opening for softball
- Low-profile flat beam construction maximizes sightlines, protects, and minimizes weight
- Removable liner system
Reviewers Noted:
Minimal distortion . Easy to use . Durability . Weight . Pet approval
Features:
- Heavy-duty steel construction with powder-coat finish
- Quick and easy loading with adjustable clamps and wheel holders with straps
- Will fit most styles of bike with tires up to 5" wide
Features:
- The new 2021 rv rider carries 2 e-bikes (up to 80 lbs. each) on the back of an rv motorhome, a 5th wheel or a flat towed vehicle. special features…
Reviewers Noted:
Ease of setup
Features:
- Carry bike pro m for vertical spacing between 80cm and 150cm use
- 1 x rail quick 128 and 1 x bike block pro 2 4th bike upgrade kit
- As above plus 1 x rail quick 128 and bike block pro 4 downloads
Features:
- Integrated bike lock
- Holds wheelbases up to 47 and tires as large as 3 width
- Spacing increased between bikes to 14
Features:
- Transports 1-4 bicycles on an rv or camper trailer bumper (max 60kg. capacity)
- Designed for 10cm – 11cm square rv bumpers, instals with a 16cm and 20cm long bolts around the rv bumper
- 3cm w tyre wells with 16cm spacing between wells, 11cm from bolt to first well
Features:
- The steel construction.
- The transfer v2 is more solid than ever.
- Flatlock hitch cam for enhanced stability in tow.
Features:
- Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray.
- Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting.
- Improved mounting hardware fits most factory cross bar profiles.
Features:
- Fits ladders with 1" round tubing
- All hardware included
- Lightweight aluminum design
Features:
- Form fit cradles securely hold your bikes
- Easily installs to fit standard rv ladders
- Bonus straps provide added security
Features:
- (open-box) hyperax hitch mounted bike rack carrier for rv trailer
- Designed for camper rv trailer
- 140lb max load (70lb per side)
Features:
- Transports 1-2 bicycles on an rv or camper trailer bumper (max 60 lb. capacity)
- Designed for 4" to 4.5" square rv bumpers, installs with (2) 6.5" u-bolts around the rv bumper
- 2"w tire wells with 6.25" spacing between wells, 4" from bolt to first well
Features:
- Two-bike capacity, up to 60lbs each
- No-tool install
- Fits wheelbases up to 48”
Features:
- Ratcheting wheel strap quickly secures back wheel to tray.
- Maximum bike weight up to 20 kg.
- No bike frame contact is made as the hook securely grabs the front wheel suitable for bikes with carbon frames.
Features:
- Bike carrier rack – the guide gear hitch cargo carrier is perfect for trucks. made to haul 2 fat tire bikes, featuring adjustable wheel holders.
- Durable – the bicycle rack is made from durable steel with a powder-coated finish that’s rust and corrosion-resistant for long-term outdoor use.
- Adjustable – the cycling rack features a 200 lb. weight capacity and adjustable wheel holders. will fit any type of bike.
Features:
- Combine with a power tower for easy transportation on your rv trailer’s a-frame
- Combine with a bump-it for easy transportation with most car or rv hitches
- Combine with a bike base for easy transportation on various trailer frames
Features:
- New frame grip arms have improved soft frame-friendly coating to protect bike's finish
- Center arm folds down to allow access to the rear of vehicle without removing the rack
- Built-in anti wobble hitch device
Features:
- 1 piece
- Highly effective
- Easy to use
1. Swagman Traveler Xc 2 Rv Bike Rack
Product Details:
Attach the swagman xc 2 bike rv bumper rack to the back of your rv or suv for a fun filled vacation. this rack carries 1 or 2 bikes and can be mounted either via a 2" hitch receiver or a 4.5" continuous steel welded rv bumper with the included bumper mount adaptor. push-button ratchet arm easily adjusts to secure your bike on the platform design. it also folds up for easy storage when not in use.
Specifications:
Length |
5.29 in |
Height |
34.34 in |
Width |
12.24 in |
Weight |
39 lb |
Reviews:
Just after a few RV trips, this product broke/was defective. The front left part of the frame (where the tire is placed) bent downward while in route, and my bike was left dragging behind our trailer. Needless to say, my bike was damaged. Now I have to get a new bike carrier and bike. Not happy with this product at all.Diane
While the rack itself looks to be extremely well made, it is not going to work for us. The 'foot' which is the bar between the hitch and the rack is not long enough so the handlebars on the outside bike still hit the back of the 5th wheel. There is no way any bike would fit on the inside. We are going to have to return it and look for another solution. The instructions could be better, but as it was 90% pre-assembled, it wasn't too hard to figure out the rest.Eric
It was easy to assemble. Seems very sturdy. Adjust to fit our two different bikes as advertised. The only negative is that our fifth wheel doesn't have a rear bumper so we had to get a hitch extender so the bikes would clear the back of the camper. The good thing about that is we were able to get one that gives it a little more ground clearance.Dale
2. Swagman – 4 Bike Rv Bumper Rack
Product Details:
The swagman rv bumper rack 4 is a simple and economical way to carry up to four bikes on the back of your rv. it is rv approved, meaning that it’s built especially to withstand the extra stresses of being on the back of your travel trailer or 5th wheel rv. it fits to 4 – 4.5” continuous welded steel bumpers. the powder coated steel construction is strong and durable. an upright bar at the center of the rack gives added support to your bikes.
Specifications:
Length |
2.5 in |
Height |
41.75 in |
Width |
23.5 in |
Weight |
45 lb |
Reviews:
When the brand says 4", they absolutely mean minimum. Our hitch was 3.85" and this won't work, it doesn't stay (you see in the photo it attached to a pop-up camper that is identical to ours). That's not my main complaint though, the hardware is almost impossible to tighten down permanently. Once mounted, ours kept loosening once the bikes were attached. I'm not a scrawny guy, and I torqued the things down just shy of snapping the metal brackets in half so I know it wasn't because I didn't tighten them all the way. Overall, not exactly what I was expecting to deal with for the cost.R.B.
So ive struggled with bike racks for our camper. we have 3-4 bikes normally ranging from ages 7 to old guy.. ??. The previous racks were aerial and strapped to the frame, but would bounce so much that the handles would hit the camper(even with overtighten of rack and hitch receiver). Wanted to try these rack cause of the stability and not swining around. It has 2 bars that attach in 2 different places to assist with the security of the bikes. Problem I see is that the bars dont line up with the bikes. So you have to place bike outside of the skinny tire placement. Also the rack is great if you have the same style bikes… each of our bikes are different lengths and heights of course. I measured one bike to attach bike to camper, but the newer version of the 2nd bike is 2" longer, which now makes the bike rack to close. and on the kids bike, i can only use one wheel to drop in to rack, the bike aint long enough.. ?? I love how sturdy it is and the construction material used. i think the uprights need more engineering. thank youR.N.
While sturdy and fabricated with steel members, there are very short vertical supports to secure the bikes. It needs additional brackets that are the same height as a bike and some way to clamp the bike in the vertical position rathe than a short post that is shorter than a bike tire. Bad design.donohoocoins
3. Quick Products Qprbm2r Rv Bumper-Mounted 2-Bike Rack
Product Details:
Pre-owned — put that rv bumper of yours to use and add some fun to your trips with the bumper-mounted 2-bike rack from quick products! the rack features two platforms that easily mount to your 4” to 4.5” square bumper and give you completely customizable control over the width, ensuring that your bike fits perfectly every time. slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to. note: will not fit fat-tire bicycles or bicycles with wheels over 29”. weight should not exceed 30 lbs. per bicycle. caution: before installation, be aware that rv manufacturers may place load restrictions on their vehicle’s bumpers. these load restrictions must be followed to create a safe rving experience. if you are unaware of your bumper’s load restrictions, please consult your manufacturer for information to ensure safe use. install only on continuous-weld steel bumpers.
Specifications:
Product Dimensions |
22 x 3 x 26 inches |
Country of Origin |
China |
Folding |
No |
Load Capacity |
30 Pounds |
Mounting Type |
Tire Mount,Bumper Mount |
Reviews:
Rack appears to be very sturdy. Easy to install. Good value for the price. However, the slots were not wide enough to accommodate my mountain bike. The specs did not indicate the width (1-7/8") . I adapted the rack by cutting pool noodle sections and fitting them to the cross bars either side of the wide slot. This filled in some of the excess space and allowed the bike to fit there. The vertical bar was a little short and too far from the bike to allow its secure attachment. I solved this by lag screwing a block of wood to the upright. With these modifications, the rack works fine. If Quick Products made the upright a little longer and designed the slots to be adjustable, rack would probably be worthy of a 5 star rating.Ronald
Easy to install, works well.gerhardt449
GREAT ,,WORKS AND SET UP EASY , THANKSdonalstadle0
4. Fultyme Rv 1300 Hitch Mount 2-Bike Rack
Product Details:
Location : rear heavy-duty steel construction with powder-coat finishquick and easy loading with adjustable clamps and wheel holders with strapswill fit most styles of bike with tires up to 5 ́ ́ widequiet anti-rattle design2 ́ ́ receiver tube—hitch pin included.
Specifications:
Capacity |
2 Bikes |
Max Load |
200 lbs |
Reviews:
This is a solid heavy duty rack. I have 2 step through e-bikes that fit very well. I had to also get cross bars since my frames are step through. I can mount the rack and load the bikes in well under 5 minutes. You need to be able to lift and handle 50lbs to load e-bikes on the rack. There are no locks on this rack. I also purchased a receiver pin lock and a cable pad lock to secure the bikes. All in, I still spent a lot less than some of the high end racks with locks.Ken
Rated for 200lbs, tire mounts BENT holding a single 60lb bike on one 120mile drive from Phoenix to Tucson. Cheap foam coating on frame support ground through entirely and DESTROYED my brand new $2000 bike frame before i even got to ride it. Please please dont buy this product. Its really unstable, 100% not safe for anywhere near what its rated and could destroy your bike like it did mine. The tire mounts are IMPOSSIBLE to tighten safely. They will tip and bend and move. Photos show destruction of the rack. The bike frame is being repaired by a welder to fill the gouge in the frame. Im both upset and angry and am contacting the company for compensation as walmart would only refund the rack itselfKel
Ordered this rack for a bike trip with friends. Sadly i cannot comment of the rack itself. The package delivered to my porch and looked as if it had been shoved out of an airplane from 10,000 feet. The mangled package had a strong pungent Moldy odor coming from it. We tore the soft spongy cardboard open on the end to peer inside. The inside of the box had spots of black nasty goo on it and the bike rack itself was covered with patches of rust. I find it hard to believe that someone at the warehouse actually sent this package out. They must have known this stinky mangled rusty package would be immediately returned. You need to step up the game wally, I will be re ordering this rack, but this time it will be from someone else who's name starts with the letter A.mpbjr57
5. Hollywood Racks Rv Rider E-Bike Rack
Product Details:
The new 2021 rv rider carries 2 e-bikes (up to 80 lbs. each) on the back of an rv motorhome, a 5th wheel or a flat towed vehicle. special features include universal heavy duty wheel holders for heavy load carrying capacity. these wheel holders can fit any tire up to 5" wide and include a ratchet wheel strap. locking frame grabbers secure the bikes in place. the frame grabbers can attached to a bikes frame or seat tube with a diameter range of 1"- 2". a locking cable and keyed alike hitch pin secure the bikes to rack and the rack to the vehicle. the bike rack folds up when not in use and can tilt down for rear cargo access when the bikes are not mounted (when used on an rv or motorhome). a double walled receiver tube handles the extra weight of the electric bikes. an included hitch tightener reduces motion inside the hitch (receiver hitch must have a flange). a minimum class 3 trailer hitch is required to use this bike rack.
Specifications:
Capacity |
Two Bikes (Max. 80 lbs per bike) |
Hitch Size |
2” only (Do not use a 1¼” -2” hitch adapter) |
Maximum bike wheelbase |
60” |
Maximum tire width |
5" |
Rack Weight |
63.5 lbs. |
Minimum Vehicle Length |
24' |
Reviews:
Exactly what I was looking for. Great service when I was in the store.chris c.
My wife was indecisive in choosing a mountain bike, and had me return two previously purchased bikes within the 30 day return policy. John and Austin were extremely pleasant and accommodating throughout the whole process. They assisted in sizing her to the perfect fit and matching her to the desired features… finally!
6. Fiamma Carry Bike Pro C Rv Bicycle Rack (02094-10a)
Product Details:
Compact, rear mounted bike rack for coach-built motorhomes with limited installation space on the back wall. the carry bike pro c carries 2 bikes as standard but can be made to hold 3 or 4 bikes with optional upgrade kits. the bolt-through-wall installation makes the fiamma carry bike pro range suitable for motorhomes without pre-installed bike rack mounting brackets, and the bike rack comes with all required fixings and mountings. the compact size of the pro c model mean it is ideal for installation below the motorhome rear window or where you want the internal bolt plates to be hidden inside the garage compartment or a low cupboard. fiamma carry bike pro is highly recommended by experts in the industry as the strongest bike carrier on the market.
Specifications:
Max Load |
60KG |
Bikes Standard |
2 |
Reviews:
Works perfectly on rear of motorhome.Good purchase.Wayne L
Easy to assemble and very solid when attached to my Motorhome. As the fixing points were already won the MH some of the components were not required. And also the plastic cover for the top fixing does not cover the existing attachment point. Perhaps Fiamma should provide an alternative. All in all very pleased with this product.124_jhow_124
Not Quite what I expected but have adapted it ro fit my motorhome. Very pleased with the unit in general, easy to assemble.50newport
7. Kuat Sherpa 2.0 2-Bike Hitch Rack Black 1.25 In
Product Details:
If maximal minimalism is a thing, this is it. ever lifted a can of beer and thought, “it’s just too heavy!” no. because the can is aluminum, and aluminum is light. the sherpa 2.0 2" is all aluminum, meaning it’s light as can be. beer sold separately.
Specifications:
Fits Hitch Receiver Sizes |
1.25" or 2" |
Load Capacity |
1 – 2 bikes |
Weight Capacity |
80 lbs. (40 lbs. per bike) |
Spacing Between Bikes |
14" |
Fits Wheel Sizes |
20 – 29"* |
Maximum Bike Wheelbase |
47" |
Maximum Tire Width |
3"** |
Ground |
December 19 |
Next Day Air |
December 22 |
Standard to Canada |
December 9 |
Reviews:
We were a bit apprehensive at first, not necessarily with the bike trailer, but more or less with the 1.25 hitch that we had to opt for as the dealership misinformed us on the size of hitch compatible with outback.I am happy to report we have had no problems with the sturdiness of this bike trailer as we were afraid the 1.25 would result in a wobbly outcome. As other reviews mentioned the trailer itself was a bit difficult to assemble. However once assembled and loaded it was exactly what we needed. We are comfortably and securely able to load our 2 Trek bikes and have no problem with the arms or straps. The only complaint is the thickness of the pin used to lock the trailer to the hitch. Could use a better pin something a bit thicker and sturdier for it to feel very secure.JAAM
First off, I'll mention that assembly was a bit harder than I thought it would be. The long bolts connecting the two pieces of frame together took a bit of finesse (and a rubber mallet) to get them to slide in and line up properly. It helps if you take the part of the frame where they screw in (on the outer rail) off first and line that up separately. Once I figured that out, the rest was a breeze. I really like the ease of use with this thing – bikes go on and off in just minutes. Way easier than it used to be trying to squeeze them into my car. I also enjoy how light it is, and how quickly it comes on and off the hitch. Although the price is a bit high, it is well-made and worth it. Highly recommend.Nate
There are things I like about this rack, but I think it's quite overpriced for what it is. I found it easy to attach to the hitch and I like the overall design – the arms feel secure, I like being able to fold the rack easily, and it does hold my bike well. I was also able to use the farthest rack position as a makeshift bike stand while I did some work on the chain, which was handy since I don't have my own stand. However, for this price point, I expect more than to have to use my own cheap Velcro strap to secure a mountain bike with average/slightly wide tires. I'm not using some kind of niche fat or cargo bike here – why doesn't the Kuat come with an integrated, high-quality strap for this purpose or better yet, a design that doesn't require that extra step at all? I also find the ratchet strap for securing the rear tire to be poorly placed. You can't get the bike on the rack without crunching the strap down and having to yank it out from under the tire manually, which is definitely increasing wear and tear already. Finally, the lock that comes with the rack for securing the rack to the hitch felt very cheap and online reviews suggest it can be broken very easily (a problem when you live in a high-theft area, which is not Kuat's fault), but it did lead to an extra cost to buy a more secure lock. Long story short, I'm glad I have the rack and it gets the job done, but it's premium pricing for an average/good product. I can't give a 4 or 5 star review when the value is skewed like that. Highly recommend waiting until this goes on major sale.liz4500
8. Rv Or Camper Trailer Bumper Bike Rack For 1-4 Bicycles
Product Details:
Tubular steel bicycle rack specifically for rear square tube styled rv bumpers to carry 1-4 bicycles. the 40" l x 20" w rv bumper bike rack attaches to a 4" -4.5" rv bumper with one 6.5" and one 8" u-bolt. two, 26.5" angle support brackets give the carrier extra added support when hauling a full load. includes two "l" shaped 19.5" supports for bicycle tie-downs and will work with bicycle tires up to 1.75" wide. maximum 140 lb. capacity.
Specifications:
Number of Bikes |
4 |
Bike Mount Type |
Hitch Bike Racks |
Weight Capacity (lb.) |
140 |
Automotive Part Type |
Fixed Bike Rack |
Compatible Bike Type |
Universal |
General Part Type |
Fixed Bike Rack |
Product Width (in.) |
20 |
Reviews:
Ordered an APEX 4 bike carrier in August and received withing 5 days. Product good but just didn't fit my travel trailer. The space between the bumper and the trailer is too narrow. I wasn't able to check the product with the 30 day return window so i called to find out if there was an adapter available. I was told I'd get a return call but never did. I understand it's my problem that I didn't check the racks soon enough but I was hoping to be able to use them.Ramon R.
Instructions that came with ramps said to use 4 included U-bolts to attach ramps to bumper. No U-bolts were included. Called customer service, they said they would send the missing U-bolts, but a few days later I got another email saying no U-bolts were required. Bumper is mounted too close to camper to use pre-drilled holes with any kind of bolts. Will probably have to weld ramps to bumper. 2019 Coachman APEX Camper.Sherman M.
It works well on the back of our camper. It holds 4 bikes securely. It was easy to install with no issues. The only thing I will say it it will take you a few minutes to figure out the best way to strap the bikes down. But that's no biggie. It's so mice to easily pick up the bikes and put them on and not worry about taking wheels off and such.Amanda
9. Kuat Transfer V2 2-Bike 2" Hitch Rack
Product Details:
Kuat produces some of the more innovative hitch racks on the market, and the transfer v2 might actually trump them all. it isn't the burliest or most impressive looking, but this u-shaped paragon of simplicity will safely and securely hold two bikes, ranging from 18" wheel versions through high volume 29er set-ups and fat bikes with 5" tires. the system allows you to change the angle of the curved wheel carriers to adjust for bar/saddle height issues, and really should become the standard for racks of this style. with this feature and many more, kuat has still managed to deliver a superlative rack under $300. the transfer v2 2" / 2- bike is more solid than ever. from the steel construction of the original to a new flatlock hitch cam for enhanced stability in tow. plus, a semi-integrated cable lock for an upgrade in security. the best part? the new transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price.
Specifications:
Length |
32 in |
Height |
7 in |
Width |
31 in |
Weight |
48 lb |
Reviews:
I purchased this rack, and after assembling it, I discovered that I can’t insert my locking pin into the receiver. Kuat offset the hole so the rack can fit into either a 1-1/4” or 2” receiver. You have to use the pin that comes with the rack, but you can’t lock the rack into the receiver. They give you a cable lock to lock your bike to the rack, but without a way to lock the rack to the receiver, a thief can just remove the rack, and a bike if it’s on the rack. What an idiotic system. I’m not a big fan of Yakima because their overpriced and the quality has gone downhill, but at least their adapter collar allows their 1-1/4 rack to properly fit into a 2” receiver so you can lock the bike rack into the receiver. You’re better off buying a Yakima.RadBean
I drove 200 miles to pick up my Transfer V2 two bike rack for my Prius, so I needed the 1.25-2" shank. There was one left, being held for me which was good service by REI. Upon returning home and assembling the rack (the instructions are good so it is easy, though takes time) I discovered that the shank, which is the male end that slides into the receiver hitch, was 2" and not what the box said. I called Kuat and explained the problem to Angela in customer service. She's sharp and grasped the problem, saying that somehow the incorrect rack was put in the box and she would have the correct shank sent overnight, not the usual "you should receive the package in two to three weeks" from too many companies, while you do without whatever it is. This was astoundingly great service from Kuat and by Angela. She is obviously a 'people person', as had been other customer service reps at Kuat when I had called for rack advice previously. Not just polite, but happily volunteering information and advice, no doubt reflecting management and owners. I chose the Transfer V2 on the advice of a Kuat rep and am very happy with it. The build quality is good, it is easy to use, and the built-in system to stabilize the rack in the hitch works solidly. I once owned a bike shop and have had numerous racks over the years, so have experience. I highly recommend this rack for a person who doesn't, for some reason, need the features of one of the other Kuat racks, but if they do choose another model I'm sure they will be just as happy.LouisG
Bought this today thinking I would be able to use it this weekend. One of the front tire cradle bolts was cross threaded when trying to tighten the puck. Called support and they were very responsive. A replacement cradle assembly and hardware is on its way. Also noticed rust coming out of the non-locking end on the U arm. Quite disturbing considering I’ve paid for a brand new unit in a sealed box. QC must have missed this one completely and wonder about factory’s storage (outdoors?). Non-locking end cap also broke at the screw hole as I tried to make it fit onto the U arm. Extremely tight fit. Not a pleasant assembly experience, and must say I enjoy putting IKEA products together!SignalCPT
10. Thule Proride Xt Bike Rack
Product Details:
Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray. quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting. improved mounting hardware fits most factory cross bar profiles. pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage. safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw. stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps. easy, tool-free interface for switching carrier from one side of your car to the other. product details when you want to quickly go from 4 wheels to 2, enjoy the convenient loading and unloading of the upright thule proride xt bike rooftop rack. it's built tough to carry a bike weighing up to 44 lbs. frame holder and wheel tray automatically position your bike when you secure it, giving you piece of mind while traveling.
Specifications:
Length |
57.8 in |
Height |
3.7 in |
Width |
13.43 in |
Weight |
13.29 lb |
Reviews:
I bought two of these after my roof rack and 599 big mouth bike holders were damaged by a tractor trailer. I own a small minivan, mazda 5, and the rack is just high enough that I can just reach so there's always the potential for some difficulty putting a bike up there and this carrier exacerbates the issue. Without a decent tray the front wheel wants to turn and fall off requiring the fork to be held while leaning the bike to get the clamp past the stays and crank, but if the tray is remotely damp the rear wheel will slip out instead. The big issue is the tray really doesn't keep the wheels in place. I've since bought replacement 599s with proper trays and use these two as backups, I've had a lot of thule over the years but with the tray style these use, they're awfulruss
I am an avid cyclist and have used Thule products over the years along with others but keep coming back to Thule. My cycling has moved away from straight road and mountain biking towards gravel cycling. This rack is excellent all the way around and works well with a little prep; put the pedal facing you at the 4-5 o'clock position, push the straps behind the wheel holders, lift the arm up to about 40 degrees. I grab the seat tube and front fork on my BMC Road Machine and it goes right up and drops into place. I don't worry about it either as its stable as a rock at 70mph on the highway and off road at least up to our drop in points. I would not have mountain my prior mountain bike up top…its just too heavy for me to navigate…fit for purpose…hitch mount. It is sad to read the review where the bike shop installed this rack on a Subaru Crosstrek incorrectly, yea read and follow the simple instructions if you are going to mount it driver's side [reverse the jaw/holding arm first…]. Not that difficult. The jaw always opens facing you. In my opinion for a roof rack that lets you keep your front wheel on, especially those of us with Thru Axle's its the best. Keep ridin!MadmanXWater
The pro ride XT is slick and holds onto the bike very tight. It is very easy to use when you actually read the instructions and put it onto the right side! Who knew?! And when lined up properly and tightened right it had no wobble cruising at 100km/h and 80km/h with winds, other than small shakes. Very impressed. Unfortunately It seems THULE decided that security should cost so you have to but the locks separately which just added to the already huge price. But it should last me a long time. It comes with T-slot adapters and square bar too so it can be used on different rigs. Also it grabs meaty MTB tires with room to spare. She's a banger of a rig overall.That guy with a kona
11. Stromberg Carlson La-102 Bike Rack For Rv Ladder
Product Details:
This bike rack attaches to your rv ladder and is secured to ensure a no rattle rack. once installed, pins can be pulled to easily give you access up and down your ladder. the bike rack carries two bikes and will get them to your destination safe and secure. made from aluminum to match the no rust finish of your rv ladder. length from bend to tip of extended bike arms is 13", maximum distance between bike cradles is 9". weight capacity of bike rack carrier is 50 pounds.
Specifications:
Length |
23 in |
Height |
4 in |
Width |
18 in |
Weight |
5 lb |
Reviews:
Received the product within 36 hours. Was easy to install on ladder rack took less than 30 minutes. Remember to measure your bikes for length so the bikes do not block the tail lights. This product looks and great and performers as advertised. We awe very happy with this purchase. The price was very reasonable. RickRichard K
Like this rack because it's permanently mounted and doesn't have to be removed/stored when not in use. Straight forward installation, and provides a sturdy rack for bike transport. Received with one odd flat head bolt to short for use. Was able to purchase a replacement at local hardware store.dwsheltn44
This bike rack, once we finally got it installed, looks like it will be exactly what I want. That being said, the bike rack was very challenging to install. I have probably more than average experience assembling things and using hand tools. The bike rack came with extremely limited instructions and did not state that tools would be required for installation (an allen wrench was included). It took my sister and I almost an hour and a half to install the bike rack. The instructions indicate the importance of the correct arm for the bike rack being installed on the correct side of the ladder (right or left vertical rail) but the arms are *not* marked to indicate which rail goes on the right or left. We also found the screws that were included to be a tad too short, which meant we kept dropping them. We were unable to use the washers included because the screws were too short. My ladder on the RV was also scratched by the installation of the bike rack. Once we did get the bike rack installed, I am pleased with it but feel like installation was much more difficult than it needed to be. I feel so strongly about this that I reached out to Stromberg Carlson via email with my comments. Would I recommend this bike rack to others? Yes, but with the caveat that it was challenging to install, definitely took 2 people to install, have some basic tools available at the time of installation and expect your RV ladder to be scratched in the installation process.kittlecat
12. Camco Manufacturing Camco 51492 Rv Ladder Mount Bike Rack
Product Details:
Make your everyday life more convenient and simpler with our range of tools that offer the reliability and durability you desire. these tools are designed to cater repair and maintenance tasks in any home. durable and reliable construction. easy to use and convenient designs. tools for different applications.
Specifications:
Length |
3.7 in |
Height |
11 in |
Width |
23 in |
Weight |
8.7 lb |
Reviews:
At first I was worried about the low price, however I am pleased with its sturdy construction it is well made. I have mine hanging on the ladder of the back of my fifth-wheel. Been traveling with one bike. I removed the outer rubber hanger. I do use the straps that came with it, I feed them through the wheels to the ladder so the wheels don't turn as we drive. I am very happy with my purchase.MBMarx
Good solid foldable bike rack. Fit perfectly on my RV ladder. Don't know how much weight capacity the rack will hold, but Steel Frame cruiser bikes weigh about 40 up to 48 pounds. I opted for an Aluminum frame Cruiser I found on Walmart.com for around $100 that only weighed about 28 pounds. Two bikes of that weight saves your peace of mind of strapping an extra 100 pounds on your ladder or just 60. Saw some reviews that said rack leaned down, I'm believing this was the result of the weight of the bicycles being heavy steel frames bikes. Of course if you are using this for childrens bikes that's a different story I use mine for two adult bikes 26" Cruiser style. I like how the rack folds up when you take the bikes down and is not staraight out where you could knock your head on walking around your RV. Comes with two straps, one to tie rack down to ladder and the second one to tie loaded bikes to ladder itself. You can then add locks or extra bungees to keep your valuables dextra safe. Very happy with purchase.tg
Did not like , and will be returning. once attached to the ladder the placement of the bikes should be at a 90 degree angle, but it is more than a 90 degree, so it slopes down. i had to stop twice to tie them back on because the rubber tie down just slid down the tube. on my return trip i had to tie the bikes directly to the ladder to make this work, and yet it did slip a little.louis
13. Hyperax Volt Rv Rated Hitch Mounted E Bike Rack Carrier For Rv Camper Motorhome
Product Details:
Exclusive design for rv: this model features a strengthened hitch mount designed carrier to fit class 3 or higher hitch receivers (front and/or back), giving you extra safety on the road. please note that hitch receivers must be chassis mounted. mount the hitch rack to bumper mounted hitch receiver may lead to bumper tearing off and result in serious damage to the rv and even deadly injury. caution: due to tight space, please do not install the volt rv between front vehicle and the trailer. 140 lb total capacity: supports up to 70 pounds per rack, our rack is compatible with mountain bikes, electric bikes, road bikes with up to 5-inch fat tires, and up to 58-inch wheelbase. for step thru or lady bikes, bike adapter required (not included) safe and secure: comes with co-injected soft rubberized ratcheting hooks that secure the frame of your bike in place without scratching the metal surface. featuring dual key locks to prevent bikes and bike rack from being stolen. adjustable wheel holders allow you to easily accommodate bikes of different sizes. tighten the wheels with reflective velcro straps that help improve visibility in the dark. additional security straps included, ensuring your bike stays firmly on the rack carrying handle / integrated wall mount: when the rack is fully removed from the vehicle and folded up, simply grab the carrying handle to easily move the rack around. the integrated storage hook allows you to hang the rack on the wall, saving you valuable space fits 2 inch hitch receiver: works with vehicles with 2-inch class 3 receivers and above. secured by an anti-wobble ½ inch steel pin and a key lockset (patent pending), the rack is sturdy and built to last. featuring a strengthened hitch mount, designed to fit class 3 or higher hitch receivers, hyperax bike rack gives you extra safety on the road. enjoy your camping trips on your rv trailer, and let us do the heavy lifting.
Specifications:
Package Dimensions |
32.68 x 12.99 x 9.84 inches |
Load Capacity |
140 Pounds |
Mounting Type |
Hitch Mount |
14. Rv Or Camper Trailer Bumper Bike Rack For 1-2 Bicycles
Product Details:
Transports 1-2 bicycles on an rv or camper trailer bumper (max 60 lb. capacity). designed for 4" to 4.5" square rv bumpers, installs with (2) 6.5" u-bolts around the rv bumper. 1.75"w tire wells with 6.5" spacing between wells, 4.5" from bolt to first well. single l-style support tie-down 19.5"h brace (bicycle tie-downs sold separately). heavy duty steel construction with a black paint finish. rage power sport tubular steel bicycle rack specifically for rear square tube styled rv bumpers to carry 1-2 bicycles. the 24" l x 20" w rv bumper bike rack attaches to a 4" -4.5" rv bumper with a 6.5" u-bolt. includes an "l" shaped 19.5" support for bicycle tie-downs and will work with bicycle tires up to 1.75" wide. maximum 60 lb. capacity.
Specifications:
Automotive Part Type |
Fixed Bike Rack |
Bike Mount Type |
Hitch Bike Racks |
Compatible Bike Type |
Universal |
General Part Type |
Fixed Bike Rack |
Number of Bikes |
2 |
Weight Capacity (lb.) |
60 |
Product Width (in.) |
20 |
Reviews:
Ordered an APEX 4 bike carrier in August and received withing 5 days. Product good but just didn't fit my travel trailer. The space between the bumper and the trailer is too narrow. I wasn't able to check the product with the 30 day return window so i called to find out if there was an adapter available. I was told I'd get a return call but never did. I understand it's my problem that I didn't check the racks soon enough but I was hoping to be able to use them.Ramon R.
We bought this product to use on our 5th wheel. I works well although the holes for the "U" bolts were misaligned and had to be redrilled for the "U" bolts to fit properly for installation. Once installed the bike rack did an adequate job of carrying our two bikes. For the money I would say it was satisfactory. Would I recommend it? Only if you wish to go inexpensive Is it good quality? I would say more or less; but nothing to brag about!uaboomers
It works well on the back of our camper. It holds 4 bikes securely. It was easy to install with no issues. The only thing I will say it it will take you a few minutes to figure out the best way to strap the bikes down. But that's no biggie. It's so mice to easily pick up the bikes and put them on and not worry about taking wheels off and such.Amanda
15. Kuat Nv 2.0 Bike Hitch Rack
Product Details:
Designed to exceed expectations, the nv 2.0 is küat’s most thoughtful rack to date. while maintaining the spirit of it's predecessor, the nv 2.0 underwent a comprehensive overhaul, making this rack truly shine. a re-designed pivot system, with foot assist, will endure a lifetime of abuse. adjustable cradles allow for fast bike fit adjustments. individual bike cable locks are longer, more durable and easier to use. the new trays accommodate bikes with up to 4.5 inch tires to insure a true fit for any bike in your stable. updated ratchet arms create intuitive release and a more stable tow so you know your bikes will be safe and secure while you're on the road. to top it all off, the trail doc underwent re-design and now delivers a pro level feel. so load the nv 2.0 up and head to the hills.
Reviews:
Having fenders is no problem, Just drop the arm just in front of the Fender. My E-Bike is 55 lbs & this rack has no problem supporting the weight. Loading my bike is very fast & easy.The front cradle holds the front tire securely & the rear tire sits in a shallow channel. Kuat does offer a ramp witch would make this process even easier. The integrated cable locks are a good way to lock your bike during transport. The Rack over all fills heavy duty & solidly built. Cosmetically it’s very beautifully painted too. Cons, The key hole to the Cable locks has a little spring loaded cover in the hole. So you have to put the key in at a angle to push it out of the way. It took me a Minet to figure that out.Mike
Ok, I love my biking and hate my bike racks. To say that most are put together with string and bailing wire is an understatement. I had one brand that was so top heavy that I honestly thought I would lose my bikes along the highway somewhere. That is until I bought the Kuat from REI. Expensive!!!! I bought the NV and then the doubler so I could have 4 bikes at once. I have been beyond impressed with this rack. Solid, stable, easy to use and very secure. Every part of this rack has been thought out and engineered to perfection. I know this sounds kind of over the top for a review but as a dentist, I look for details and precision in everything. This delivers in spades. I cannot say enough good things about it. So just suck up the price and appreciate the incredible quality that you are going to get for the money.DrKK
Trek Farley 5.0 (large frame) with 27.5 x 4.5 tires (Bontrager Gnarwhal Fat Bike Tire). Kuat phat bike kit installed. Cradles in lowest position. The ratchet arm will not come over the top of the tire without leaning the bike, swinging the arm up, then centering the bike/tire under the arm. Attached is the video Kuat sent me. This metjod is fine for one bike, but with 2+ bikes that need to be leaned, the other bikes get in the way. Kuat support says "Unfortunately at this time we do not have a solution". It seems like a nice rack otherwise, but Kuat's specs are misleading.Stephen K
16. Thule Upride Bike Rack
Product Details:
Sometimes you want to save the riding for the destination, in that case you'll want to get your bicycle there using thule's outride bike rack. this versatile roof carrier fits a variety of traditional and nontraditional bikes and securely gets them to your destination, so you can focus on riding. product features: fits most 20 29 wheel bicycles with tires up to 3" wide (up to 5 with thule upride fatbike adapter, sold separately) maximum bike weight up to 20 kg. locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately) load capacity: 44 lb dimensions: 64 x 13 x 4.3 in weight: 17 lb fits round frame dimensions: all thru-axle compatible carbon frame compatible fits roof racks with 20×20 mm t-tracks fits thule squarebar one key system compatible bike and vehicle not included outride bike rack
Specifications:
Length |
64.96 in |
Height |
4.72 in |
Width |
12.99 in |
Weight |
21.58 lb |
Reviews:
Good: Looks stylish (my opinion, subjective) Holds the bike very well if used correctly. Fast bike install ONCE you get used to it. Bad: If you don't have a Thule set of cross bars you need to buy T Bolts for your model unless you use the over clamps. The over clamps can and probably will scratch your cross bars. The T bolts for my car that Thule recommended had to come from a dealer in Europe and could not be shipped to the US. I will keep looking and hope to find them. I am using the over clamps at the moment that are all metal, for a metal on metal fit. I am not sure why the insides are not lined with a non marring material like rubber. It is possible for the two bars to not click together which could lead to a less secure holding of the front wheel. I double checked and found this condition and reinstalled. Very important to listen for the click. If a person is in a hurry or in a loud area its possible to install the bike incorrectly. Best to visually check to assure the pin is in the groove/ Takes a little getting used to. Not intuitive. Easy once you get used to it. Not the easiest to get your bike into but to be fair This is my first roof rack. My SUV is not tall but I need a step ladder. The lock for the bike to the rack needs to be purchased separately. The lock for rack to the cross bar needs to be purchased separately.By Pat
Since, we have Aeroblade/Wingbar Evo bars for our vehicles already, we didn't want to go to a hitch rack. We were originally looking at the drop wheel roof racks, but we ended up choosing this one instead, since we don't have quick release axles on our bikes. It was really easy to install the bike racks onto the bars – they slide onto the bars with the T-nuts and then put back on the end caps. We found them really quick & efficient to load/unload bikes onto the Upride racks & locking them to the rack. We drove almost 2000 kms in sun, rain, and headwind with 2 Upride racks and 2 gravel bikes attached on this trip on a sedan.JoL99
I bought this rack after being told it was the best solution for my wife's new dual suspension, I'd been using big mouth carriers for the last 10 years after switching from fork mounted carriers. The new tray is awful for the slightly wider tires, it isn't a true +sized and fit in the old trays, but the tires just roll right off these ones with no trouble. So do other bikes and its a deficiency of the new style trays but with the weight of her bike its worse. Part of the issue lies in the difficulty of guiding the front tire into the holder and then trying to hold it there while the wheel wants to slide sideways. The holder that then locks the wheel in is a total pain from there. With both MTBs it is possible to set a height and then use some force to slam it up so it locks in but its a really tight latching mechanism. This is where it gets its worst marks because with all my other bikes locking the wheel in becomes a major difficulty. The space between the downtube and front wheel of my and my wife's Blue gravel bikes, her C-dale Caadx, and my Museeuw race bike is so tight that the wheel holder barely fits in the space. With how hard it is to latch into the wheel stop getting any of these bikes on there is almost harder then with the wife's dual suspension since it isn't possible to swing it up with any momentum without it typically hitting the frame. Doing so requires snaking an arm under the frame to push up on the holder while the other hand turns the release knob to get it locked in. This method is required as there is enough flex that trying to push on the outside of the holder won't force it into the lock that holds both arms together. Releasing the latch on the lock arm, due to the pressure on the tire, caused the holder to bounce into the frame on one of the bikes leaving the tiniest ding, nothing easily noticable but enough to remind me I need to have some care unlatching it. The result is that the carrier only works well with one MTB out of 6 total bikes, that's a pretty poor score on something that costs well over 200.00 and buying it is something I regret.
17. Guide Gear Fat Tire Bike Carrier Rack, 2-Bike Capacity
Product Details:
Bike carrier rack – the guide gear hitch cargo carrier is perfect for trucks. made to haul 2 fat tire bikes, featuring adjustable wheel holders. durable – the bicycle rack is made from durable steel with a powder-coated finish that窶冱 rust and corrosion-resistant for long-term outdoor use. adjustable – the cycling rack features a 200 lb. weight capacity and adjustable wheel holders. will fit any type of bike. wobble-free – the bike rack for truck features a locking frame and velcro straps to keep wheels secure for wobble-free transport. product details hitch mount folding bring your fat tire bikes on your next adventure with the guide gear fat tire bike carrier rack. heavy-duty wheel holders, hook-and-loop wheel straps and a locking frame clamp ensure safe, secure, no-wobble transport to far-flung destinations. attaches easily to your 2窶
Specifications:
Construction |
Steel |
Hitch Size |
2" |
Hitch Length Main Frame |
15" |
Total Hitch Length from End of Frame |
38" |
Adjustable Frame Clamps |
32" maximum height |
Maximum Bike Wheel Base |
76" |
Maximum Tire Width |
5" |
No-wobble Threaded Hitch Pin-bolt |
5/8" |
Weight Capacity |
200 lbs. |
Reviews:
We have two fatties (a Motobecane and a Farley 5) and I'd been using hitch rack from which the bikes hang. The problem was that the bikes would swing and sometimes work their way out of the top clamp. That's a problem on a highway. This new rack is fantastic. The hitch mount includes a screw-in hitch pin that locks the rack firmly in place. The wheel cradles include velcro bands to secure the tires in place, and the clamps on the vertical pole have pins to stop them from coming loose. The two bikes are held incredibly well. I can even back out of the driveway without dragging the rack or the bikes on the ground. That was another problem with my old hanging rack – the bikes hit the ground when I drove up an incline. For about $150 this is a steal – get it before they are gone.StayAtHomeBob
This bike carrier uses an unlockable M16-2 bolt to secure the rack to the receiver hitch. To prevent theft I found a matching locking bolt at etrailers. The other vulnerability of this carrier is the M16 bolt that secures the two-part main frame together and I am substituting an M16x70mm shoulder bolt with an M12-1.75 thread end and an M12-1.75 locking wheel nut to secure it. Otherwise, the rack is fine for the member price.ralphm
This bike carrier is designed so it can be assembled as a single bike carrier or a 2 bike carrier. I began with it as a single bike carrier and the square tube plugs directly into the receiver without the extension pieces and all that extra weight. also, as a single is several inches lower. I'm pulling a trailer so I need a bifurcator in the receiver . The Lower hole is for an extension and the hitch ball and the upper hole is for the bike rack. I had done this before with the Allen 4 bike carrier. This design supports the wheels rather than hanging the bikes by the frame top tube. with a heavy fat tire , or worse an ebike this is much easier to load the bike on. Lift the front wheel into its wheel support loop, then lift the back wheel onto it support loop. with the frame hanging design the entire bike weight has to be lifted at once. Also my ebike is a step through, so there is no upper tube to hang it from. tThis carrier is rated for 200# so that is enough to carry two 70# ebikes with capacity to spare. This carrier is 55% the cost of the Amazon versions and has more weight capacity. The one down side is the plastic topped "wing bolts". cannot be tightened enough by hand to secure the wheel support loops in place or the inverted "vee" frame holder. This 71 year old had to put a wrench on to wing to tighten them adequately, and the plastic wing was obviously distressed. It didn't break. Might have been better to just leave the hex bolt heads exposed.rway227
18. Lippert 731137 Bikewing Double Bike Carrier
Product Details:
The bikewing 2-bike rack is the primary attachment assembly used in all 3 bike carrier mounting solutions from lets go aero. foam bumpers and the new sway control system enhance the racks natural stability and protects the bicycle finish. the adjustable wheel cradles and swaystop straps secure the bike wheels to the bike carrier for a secure ride. no motion pins minimize wobble and can be padlocked for security. kit includes 2 extra swaystop pins and rubber straps and the optional stinger attachment assembly.
Specifications:
Length |
33 in |
Height |
5 in |
Width |
12 in |
Weight |
16.7 lb |
19. Swagman Xc 2 64650 Bike Rack – Receiver Hitch Mount
Product Details:
Easily transport two bikes with swagman's xc 2. this platform-style hitch rack is incredibly easy to load. simply lift the bike into the wheel holders, secure the ratcheting hook over the top tube, and strap the wheels down. the xc rack is made of steel for excellent stability and durability, features adjustable wheel holders to accommodate different bike types, and folds up when not in use.
Specifications:
Length |
16 in |
Height |
34 in |
Width |
8 in |
Weight |
28 lb |
Reviews:
This rack is a good value. It is simple to assemble out of the box. Give yourself about 1 to 1-1/2 hours to assemble and familiarize yourself with all of the features. Never be in a hurry with any bicycle car carrier. When all is done correctly it is safe. Note that 35lbs. per bike is the maximum allowable weight. I like abundance of caution. So, I added two cargo support straps running from the rack's vertical bar to my vehicle. Reason is to reduce bounce, add stability, and to relieve some pressure on the vehicle hitch. The bicycles simply drop into the adjustable wheel holders, then the upper clamp is slid down to catch top of bicycle frame. On my bicycles, the clamp contacts the bicycle's cables. I position a rag under the cables of my bicycle to prevent scratching the bicycle's paint job. If needed then add a cable/chain with lock to secure your cargo to the rack.Jeff
I am pleased with this bike rack. I had a 1.25 inch hitch receiver mounted on my 2011 Honda Fit and this bike rack worked great with that set-up. we took a long trip from Phoenix to the Redwood Coast of California and we took along one bike on this bike rack. The bike was secure on the rack. As the trip went on we became quite confident that the rack was securely holding the bike. We used some velcro straps to make the bike extra secure on the rack when we were on I-5 going 75mph. it was pretty easy to take the bike off and put back on. I am a 63 year old lady. the center post on the rack can be lowered so once the bike is off the rack i can lower the post and open the hatchback no problem. I put orange tape on the outer ends of the rack so we wouldn't hit our shin on it. I got the hitch from eTrailer and had it installed on the Honda Fit at B and M Bumpers in Glendale, Arizona (definitely recommend BJay222
I desperately needed a bike rack for my truck and wanted one to fit into the 2" hitch receiver but I didn't want to spend an exorbitant amount of money for something I won't use all that often. Of course, I really should have followed the old adage "you get what you pay for" because I got exactly that: a cheap, flimsy rack that wobbles in the hitch receiver enough to make people following me honk their horns to tell me it looks like the whole thing is going to fall off of the back of my truck. Instead of having a solid 2" sleeve for the 1" portion of the frame to fit into a 2" hitch receiver, there are two pieces that don't go all the way around, allowing the frame to wobble inside the hitch receiver. I tried removing those pieces to use a different 1" to 2" hitch adapter, but the bolt holding them together is frozen in place. I'm going to have to find someone who can tap and drill the bolt to remove it and it'll probably cost me between $20 and $50 to have that done, but it's better than buying another bike rack.WallyWorldCustomer
20. Fiamma Carry Bike Pro Rv Bicycle Rack (02094-09a)
Product Details:
Highly adjustable, rear mounted bike rack for coach-built motorhomes which is adjustable for fittings spacings between 80cm and 150cm. the carry bike pro carries 2 bikes as standard but can be made to hold 3 or 4 bikes with optional upgrade kits. the bolt-through-wall installation makes the fiamma carry bike pro range suitable for motorhomes without pre-installed bike rack mounting brackets, and the bike rack comes with all required fixings and mountings. the tall and highly adjustable frame size of the carry bike pro mean it is very stable and can be adjusted so installation brackets can be worked around almost any obstruction in the motorhome wall. fiamma carry bike pro is highly recommended by experts in the industry as the strongest bike carrier on the market.
Reviews:
Came as describe, easy to fit when parts shorted out from drawing. Waiting to be used.jojet-ta-x6iusaa
Great rack and at a great price. Like the higher load rating as my bikes are heavy and other racks only rated around 30kg.scottishelle
Great rack but unnecessarily difficult to instal due to poor & missing informationgtj1955